Tag: dodge

ReadyLIFT (44-1960): 6” Big Lift Kit for ’19-’21 Ram 1500

David Ayers Leave a comment
Use This Post Clip for Email

Give your fifth-gen Ram 1500 the lift it deserves with the all-new, long-awaited 6” big lift kit from ReadyLIFT. Beyond offering a great-riding, tall stance able to accept 37” tires, the 44-1960 kit includes rear Bilstein 5100 shocks, dual-rate rear coil springs, and rear control arm brackets that combine to better capture small-bump sensitivity and mid-stroke support. Drive line vibration is also history thanks to heavy-duty steel front crossmembers and differential drops that retain your 1500’s factory geometry and ensure proper differential rotation during 4WD/Auto-4HI operation.

Note: Not for use on Ram 1500 with factory 22” wheels or with 18” wheels.

Features

  • For 2019–2021 Ram 1500 (5th gen)
  • 6” lift in unmatched performance, style, and durability
  • Accepts up to 37” tires
  • Bilstein 5100 rear shocks
  • Dual-rate coil springs and rear control arm brackets
  • No driveline vibration while in 4WD or Auto-4HI
  • Heavy-duty cast-iron knuckles and new, thick steel skid plates
  • Recommended max tire with no trimming: 20×9 0 offset (37×12.50 tire)
  • Recommended max tire with trimming: 20×10 -18 offset (37×12.5 tire)
ReadyLIFT 6” Big Lift Kit for 19-21 Ram 1500 44-1960

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Daystar (KC09139BK): 2” Comfort Ride Lift and Leveling Kit for ’17-’19 Ram 1500 4WD DS/DT

David Ayers Leave a comment
Use This Post Clip for Email

The KC09139BK Daystar Comfort Ride leveling kit uses heavy-duty, progressive-rate polyurethane spacers to bring the front of your 2017–2019 Ram 1500 level with the rear—all while retaining the stock factory ride quality you love. The setup lifts your truck, allows for larger tires, and is covered by Daystar’s lifetime, no-questions-asked Go EVERYWHERE Warranty. Made in the USA!

Features

  • For 2017–2019 Ram 1500 4WD DS or DT body style.
  • Front and rear spacers raise and level your vehicle (hardware included).
  • Maintains factory ride and load-carrying capacity.
  • No metal-on-metal contact.
  • Made in the USA.
  • Install time: 1–2 hours.
  • Warranty: Lifetime, no-questions-asked Go EVERYWHERE Warranty.
Daystar 2 Inch Comfort Ride Lift and Leveling Kit for Ram 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner®: Putco Metal LED 360 Bulbs

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Scott Majors from Putco to our garage and we install their Metal LED 360 Bulbs on a 2018 Ram 2500.

Parts used in this video:

Metal 360 LED, Cool White (340194C-360)

Metal 360 LED, Red (347440R-360)

Metal 360 LED, Amber (343157A-360)

Want to check out more about Putco?
https://www.performancecorner.com/manufacturer/putco

(For California Residents)
WARNING: (65) Warning Putco Inc. products may expose you to chemicals that are listed in the Safe Drinking Water and Toxic Enforcement act also known as Californias Proposition 65. A complete list of theses chemicals can be viewed at https://oehha.ca.gov/proposition-65/chemicals. For any further information on Putco Products please contact sales@putco.com.

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino OE Xtreme for 2019 Ram 1500 Crew Cab

Go Rhino: OE Xtreme Side Steps for 2019 Ram 1500 Crew Cab

David Ayers Leave a comment
Use This Post Clip for Email

2019 Ram 1500 crew cab owners can now enjoy an OE step up without sacrificing their pickups’ off-the-lot profile. OE Xtreme side steps from Go Rhino are expertly engineered and constructed from premium aluminum, then finished off with welded-in chrome end caps (or powder-coated black with plastic end caps).

Go Rhino OE Xtreme steps are available in 4”, 5”, and 6” lengths in a variety of standard, composite, low-profile, and wheel-to-wheel configurations.

Features

  • For 2019 Ram 1500 crew cab.
  • OE good looks.
  • Premium aluminum construction.
  • Different lengths and configurations available.

Go Rhino OE Xtreme for 2019 Ram 1500 Crew Cab

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Husky Liners (54501): X-act Contour Front Floor Liners for 2019 Ram 1500

David Ayers Leave a comment
Use This Post Clip for Email

Punch it, slap it, flick it, kick it: X-act Contour floor liners from Husky Liners perfectly match the contours of your 2019 Ram 1500, combining indestructible strength with a soft, comfortable cushion. Add to that a premium look and some truly exclusive features, and you’ve got liner gold. Feel it for yourself!

Features

  • Fits 2019 Ram 1500 crew cab and quad cab.
  • Tough, durable patented rubberized material resists most chemicals.
  • Patented FormFit Edge provides a finished look.
  • Flexible, comfortable material prevents stains and soiling.
  • StayPut Cleats help prevent shifting.
  • Made in the USA.
  • Warranty: No-Hassle Lifetime.

Husky Liners X-act Contour Floor Liners for 2019 Ram 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Dee Zee: Louvered Sport Bar

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking to add an aggressive off-road look to the back of your rig, the louvered sport bar from Dee Zee is a smart pick. Made from heavy-duty steel tube, this sport bar is protected by a rust-resistant textured black powdercoat and includes an integrated third brake light with required wiring. You can also easily add an LED light bar or auxiliary lights if you wish (lights not included with this product). The Dee Zee louvered sport bar goes on with no drilling: just install into stake pockets.

Available for several GM, Ford F-150 and Super Duty, Nissan Titan, Toyota Tundra, and Ram 1500/2500/3500 applications.

Features

  • Heavy-duty steel tubing.
  • Textured black powdercoat to resist rust.
  • Louvered side panels give an aggressive off-road look.
  • Add LED light bar or auxiliary lights (lights not included).
  • Third brake light built in (wiring included).
  • No-drill installation into stake pockets.

Dee Zee Louvered Sport Bar

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance: Blaster Coils for Late-Model Chrysler V6

David Ayers Leave a comment
Use This Post Clip for Email

When it’s time to tune-up your late-model Dodge, Chrysler, or Jeep, trust the ignition experts at MSD Performance to upgrade your factory coils. Available in Red and Black, these high-quality, direct-replacement coils bolt directly into factory locations and plug in to factory wiring for a seamless installation. Whether cruising, racing, or hitting the trails, MSD blaster coils deliver ignition performance to pound pavement or kick up dust.

Features

  • Reliable, direct bolt-in replacement.
  • Plug in to factory wiring.
  • Available in Red or Black.
  • Sold individually or in pack of six.

MSD_Performance_Blaster_Coils_for_Late-Model_Chrysler_V6

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817760): Outlaw Cat-Back Exhaust System with Moderate/Aggressive Sound

David Ayers Leave a comment
Use This Post Clip for Email

Designed for Dodge applications with the factory Active Exhaust option, the 817760 Outlaw cat-back exhaust system from Flowmaster provides an aggressive, wide-open exterior sound level when hard on the gas and a moderate exterior/interior sound while cruising. This bolt-on 409S stainless steel system features a dual 3.00” Scavenger X-pipe assembly that runs into a pair of specially built Super 40 Series mufflers, uses 3.00” mandrel-bent tailpipes with built-in active exhaust valves, and is finished off with 3.50” quad stainless steel embossed tips. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Made in the USA!

Fits: 2015–2017 Dodge Challenger SRT 392 and R/T Scat Pack with 6.4L engine and SRT Hellcat with 6.2L engine.

Features

  • For factory Active Exhaust option.
  • Dyno-tuned for maximum performance.
  • Stainless steel construction.
  • Made in America.

Flowmaster Outlaw Cat Back Exhaust 817760

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

BedRug: XLT Mat

David Ayers Leave a comment
Use This Post Clip for Email

With an all-new tailgate hinge, the XLT mat from BedRug uses the company’s original soft and durable BedRug material to cushion bed work and resist the threats of day-to-day adventure. The XLT features a 3/4” padded floor, a flat, anti-skid work surface, and an integrated tailgate gap and guard hinge. It goes on in 15 minutes or less.

Eleven applications are currently available—including for GM Silverado/Sierra, Ford F-150 and Super Duty, and Ram—with more coming by June.

Features

  • BedRug top surface for a softer feel.
  • 3/4” padded floor for impact protection.
  • Flat work surface.
  • Integrated tailgate gap and guard hinge.
  • Anti-skid surface.
  • Installs in 15 minutes or less.

BedRug XLT Mat

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.