Category: Industry

Iconic Accessories™ (999-0001): Can@Hand Heavy-Duty Can Holder

David Ayers Leave a comment
Use This Post Clip for Email

The Iconic Accessories Can@Hand Heavy-Duty Can Holder is designed for convenience. Unlike your typical magnetic can holder, this can holder features larger magnets that are capable of securely supporting a can up to 20 oz. This Can Holder easily attaches to metal surfaces, making it simple to keep within arm’s reach. This is extremely convenient in garage or shop settings where it effortlessly attaches to the body of most vehicles. This means installers can keep their most used aerosol cans readily available within proximity to their workplaces by attaching it to their toolboxes, vehicle body frames, and just about anywhere with a metal surface.

Features:

  • Holds cans up to 20 oz. (specifically aerosol cans)
  • (5) large magnets for extra support
  • Conveniently attaches to most metal surfaces
  • Allows convenient can use within arm’s reach
  • Attaches to toolboxes, vehicle frames, & more

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Kick-Off of Keys to Ride 2020 with Truck Hero

David Ayers Leave a comment
Use This Post Clip for Email

The Keys to Ride sweepstakes is back for another run—and this year promises to be even bigger than before. Performance Corner® is partnering with Truck Hero to bring resellers a Grand Prize worthy of their pursuit: a 2020 Ram 1500 fully customized with products from great Truck Hero brands!

July Keys to Ride Brands

Every month, participating resellers can earn double-purchase dollar credits on select Truck Hero brands (i.e. 2 entries per $1,000 in purchases) or regular entries from a brand making a special appearance in the sweepstakes. 

Participating July Product Lines

  • Purchase Entry Options for July: Bedrug and Extang
  • Bonus Entries for July: Superlift

Rules of Engagement

To be eligible for the Grand Prize, resellers must purchase a minimum of five participating Truck Hero product lines from their Performance Corner® WD between July 1, 2020 and March 31, 2021. Participants will receive 1 entry for every $1,000 in qualifying purchases and bonus entries are available (see Official Rules for complete details)

Participating Lines

  • AMP Research
  • AVS
  • BAK Industries
  • BedRug
  • Bushwacker
  • Extang
  • Husky Liners
  • LUND
  • N-FAB
  • Retrax
  • Roll-N-Lock
  • Rugged Liner
  • TruXedo
  • Undercover

Stay tuned to this blog for a head’s up on each month’s bonus brands; we’ll also be sending emails and postcards to ensure you don’t miss an opportunity to score more entries. So, get ready to sell and good luck—we hope to see you in 2021 when you win this truck!

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Raptor Series (GTS26CH): Magnum RT Gen 2 Series Drop Step System for Chevy/GMC Silverado/Sierra 1500 (`19-`20) & 2500/3500 (`20)

David Ayers Leave a comment
Use This Post Clip for Email

The Magnum RT Gen 2 Series Drop Step System features a new and improved, 30% longer stepping area. The stepping area features raised slots that provide an extra safety grip, which makes entering and exiting your vehicle easier and less perilous than ever. This Drop Step System is constructed of heavy-duty, 14-gauge steel and designed to bolt onto factory mounting locations using vehicle-specific mounting brackets. Each system is coated with a 3-stage black powder-coat finish for extra durability and long-lasting corrosion resistance against all the elements.  

Features:

  • For `19-`20 Chevy/GMC Silverado/Sierra 1500 & `20 Chevy/GMC Silverado/Sierra 2500/3500
  • 30% longer step area than other models
  • Distinct angular drop-down design (patent #: D757622)
  • Includes heavy-duty mounting brackets & hardware
  • Easy, no-drill installation
  • 10-year warranty

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

LUVERNE: IMPACT™ Shock-Absorbing Rear Bumper Step

David Ayers Leave a comment
Use This Post Clip for Email

Add style and convenience to your cargo van while also protecting against expensive, unnecessary frame damage! The Impact™ Shock-Absorbing Rear Bumper Step is specifically designed to absorb rear impacts of up to 5 mph, in particularly when backing into loading areas. This eliminates inconvenient, expensive frame damage due to minor collisions. In addition, the Impact™ Bumper Step adds convenient access to the back of your work van, allowing easy entry and exit from the vehicle to safely load and unload cargo. This step also features fleet-approved expanded treads to offer a safety grip for sure-footing in any weather. Plus, the 9-1/2”-wide step prevents you from over stepping or missing a step. Installation is simple with the vehicle-specific, spring-loaded shock assembly (sold separately).

Features:

  • Universal design for work/cargo vans
  • Vehicle-specific brackets sold separately
  • Absorbs rear impacts up to 5 mph
  • Adds safe & convenient rear access
  • Step is 9-1/2” wide for safety
  • Fleet-approved expanded treads for max traction
  • Reinforced carbon-steel tube construction

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino (24176T): BR5.5 Series Winch-Ready Front Bumper Replacement for `19-`20 Chevy Silverado 1500

David Ayers Leave a comment
Use This Post Clip for Email

The Go Rhino BR5.5 Series Winch-Ready Front Bumper Replacement is laser measured and CNC machined using a 3D CAD software design that fits the contours of each vehicle. The bumper features a two-piece steel design that can mount a winch rated up to 12,500 pounds. The winch tray and mounting brackets are made from ¼-inch thick steel. This bumper also features a hinged winch cover that can be used with or without a winch. An integrated, hidden, front-facing, two-hitch receiver mount is also included. The patented heavy-duty Rhino Hook D-ring Shackle Mounts (US Patent # 790,408) are mounted directly to the bumper frame rails to give them extra strength and support. The unique bumper design also includes integrated light ports for lighting customization with optional light plates and a patented Light Mount Bar (US Patent # 757,316).

Features:

  • Fits `19-`20 Chevy Silverado 1500 (New Body)
  • Winch compatible (up to 12,500 lb. weight rated)
  • Hinged winch cover for easy access
  • Front-facing integrated 2” receiver mount
  • Patented Rhino Hook D-Ring Shackle Mounts
  • Integrated light ports with optional light plates & light mount bar
  • Laser measured & designed in 3D CAD
  • Mild-steel construction with a black powder-coat finish
  • ¼”-steel winch tray & mounting brackets
  • Easy, no-drill installation

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT (45652): Multi-Ball Mount (2” Hollow-Shank with 1-7/8”, 2”, 2-5/6” Balls)

David Ayers Leave a comment
Use This Post Clip for Email

CURT Multi-Ball Mounts are an obvious choice for anyone who owns more than one trailer. The multiple-ball design allows for quick changes between ball sizes without needing to install or own an entirely different ball mount. Because the balls are permanently welded to the shank, these ball mounts are also very secure which eliminates the possibility of a ball coming loose and deters any potential theft.

This ball mount features three trailer balls mounted onto a 2” x 2” straight shank to accommodate various coupler sizes and loads. This multi-ball ball mount features a 1-7/8″ trailer ball with a 5,000 lb. GTW (500 lb. TW), a 2″ ball with a 7,500 lb. GTW (750 lb. TW), and a 2-5/16″ ball with a 10,000 lb. GTW (1,000 lb. TW). This multipurpose ball mount also features a dual-length option and has a hollow shank to accept an anti-rattle kit.

Features:

  • For 2” x 2” receiver hitches
  • (3) welded trailer balls in one (1-7/8”, 2”, 2-5/16”)
  • 1-7/8” hitch ball has a 5,000 lb. GTW
  • 2” hitch ball has a 7,500 lb. GTW
  • 2-5/16” hitch ball has a 10,000 lb. GTW
  • Quickly switch between ball sizes
  • Permanently attached balls can’t be loosened or stolen
  • Hollow shank works with anti-rattle kit (separate)
  • Dual-length option at 7” or 8-1/2”
  • Lightweight, 2-piece design
  • Black gloss powder-coated finish
  • Limited lifetime warranty (1-year parts & finish)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

N-FAB (GHS2018-TX): Growler Hitch Step

David Ayers Leave a comment
Use This Post Clip for Email

The all-new Growler Hitch Step makes for a great addition to any vehicle that has a 2-inch receiver. Once installed, the Growler Hitch Step provides easy access to the bed of your truck or the roof of your SUV or Jeep. Footing is secure and reliable in the harshest conditions with the 19-inch x 7-inch sure-grip platform. Plus, this step features a custom anti-rattle clip designed for quiet and secure mounting.  All Growler Hitch Steps are finished with long-lasting, zinc-primer, black textured powder-coating and include a hitch pin for proper mounting.

Features:

  • Direct fit into any standard 2” receiver hitch
  • Allows easy access to truck bed or roof rack
  • 19” x 17” stepping platform
  • Load tested to 465 lb.
  • Raised step pattern for safe, sure footing
  • Custom-designed anti-rattle clamp
  • Textured black powder-coat finish
  • Requires no drilling
  • Limited lifetime warranty on workmanship (5-year finish)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rancho (RS999951/RS999952): Loaded quickLIFT™ Assembly

David Ayers Leave a comment
Use This Post Clip for Email

Award-winning Rancho quickLIFT™ Loaded Assemblies level and lift late-model trucks and SUVs, providing an aggressive stance and allowing for the use of larger wheel and tire packages without the cost or long installation of a complete suspension system. Each Rancho quickLIFT Loaded Unit is a gas-charged, completely modular assembly that includes an application-specific installed coil spring and upper mounting plate to simplify installation. Engineered with globally renowned, exclusive RS9000™XL nine-position adjustability, Rancho quickLIFT Loaded units improve performance and provide the ability to manually tune the vehicle’s ride to suit terrain and driver preference. Each assembly is covered by a Limited Lifetime Warranty and 90-Day Free-Ride Offer.

Features:

  • For `15-`20 GM Colorado/Canyon (RS999951-Front Right, RS999952-Front Left)
  • Levels front suspension to 1.75” of raised height
  • Clears up to 265 x 75 x 17” tires
  • 9-position tuning technology
  • Liquid metallic finish
  • Pre-assembled with coil spring & upper mount
  • Removes factory rake
  • Creates custom look
  • Increases ground clearance
  • Allows optimal performance in any environment
  • Limited lifetime warranty

*The addition of aftermarket bumpers, winches, etc. will net differences in lift height.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT (70112): Custom Tow Bar Base Plate for Jeep Wrangler TJ

David Ayers Leave a comment
Use This Post Clip for Email

This CURT tow-bar base plate for the Jeep Wrangler TJ offers a custom, vehicle-specific fit. It integrates with the vehicle frame, securely bolting into place and providing a solid attachment point for dinghy towing. The main body is hidden to help maintain an OEM look and feel on the vehicle. Each CURT base plate is constructed from welded steel and physically tested for safe towing. It is assembled right here in the USA for dependable quality, and is finished with a unique, co-cured finish for unparalleled rust resistance. This custom base plate comes with two attachment tabs for connecting the tow bar, as well as safety cables for securing to the vehicle frame.

Features:

  • For Jeep Wrangler TJ
  • Provides solid connection for dinghy towing vehicle with tow bars
  • Physically tested to Gross Vehicle Weight Rating
  • Equally spreads towing forces
  • Reduces stress on vehicle frame
  • Precisely welded for superior strength & fit
  • Co-cured in rust-resistant liquid Bonderite coating (in & out)
  • Durable, high-gloss, black powder-coat finish
  • Twist-lock tabs for easy install & removal
  • Limited lifetime warranty (1-year finish & parts)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge (11232.77): Grille LED Mount Bracket for `18-`20 Jeep JL/JT

David Ayers Leave a comment
Use This Post Clip for Email

Enjoy the benefits of behind-the-grille, mounted lighting without sacrificing the overall appearance of your 2018-2020 Jeep Wrangler JL or 2020 Jeep Gladiator JT. The Grille LED Mount Bracket is designed to mount discretely behind the Jeep’s grille for a unique lighting accent. An adaptable 3-piece design allows for mounting of both LED bars and cubes, or a combination of both for greater versatility. The concealed mounting location means there is no external wiring to hide and there is less likelihood for theft. It also features a black powder-coated steel finish for durability and extra corrosion protection. Installation requires no drilling or modifications and includes all necessary mounting hardware (lights are sold separately).

Features:

  • For `18-`20 Jeep Wrangler JL & `20 Jeep Gladiator JT
  • Creates light mounting point behind the grille
  • Mounts LED bars, cubes, or a combination of both
  • 3-piece design easily bolts into factory holes
  • No external wiring to hide
  • Less likely of theft
  • Steel construction for strength & durability
  • Black powder-coat finish for extra corrosion protection
  • No drilling or modifications required for install
  • Includes all mounting hardware (lights sold separately)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.