For
extreme front-end protection
for your Ford Transit van,
you want the universal HDX grille guard from Westin
Automotive.
This fully welded, one-piece grille guard has full wraparound wings
made from heavy-duty 2” diameter tube that extends
the protection up and around your vehicle’s headlights. The
finished uprights are wrapped in extra-wide rubber, while the full
punch plate guards the grille area. The 57-4055 grille
guard
is made
from e-coated steel that is finished
in a black powdercoat and
backed by a 3-year
warranty. Coming
soon from Westin!
Driving
and backing up a trailer comes with all the obvious sight limitations
and safety concerns. Get those gone with the Transparent Trailer Rear
Vision System from Brandmotion.
This cutting-edge innovation replaces your existing rearview mirror
with a live-streaming HD video screen, providing a crisp, clear view
with no obstructions of cabin or trailer. Compatible with trailers up
to 65 feet long, the TRNS-2110 system installs a single camera
on the end of the trailer, with a harness running to the trailer
hitch and ending in weatherproof connectors that
detach easily when the trailer needs to be separated.
The resulting image displays edge-to-edge with virtually no latency.
This
Brandmotion
Transparent Trailer Rear Vision System kit includes the camera;
quick-disconnect, truck-to-trailer harness, a 10-meter vehicle-side
harness, 20-meter trailer-side harness, and a 9.66” display
“mirror.” Some vehicles may require an adapter.
Features
Assists
with backups for trailers up to 65’
Replaces
rearview mirror with 9.66” edge-to-edge, industrial-grade, HD
video screen
Few
5th wheel hitches are rated for 30,000 pounds, and those that are can
be difficult to install and use on a daily basis. Enter PowerRide™
from CURT.
Coming in June, PowerRide is a true 30K 5th wheel hitch that was
uniquely designed also to
be easy to install and operate. The intuitive, ergonomic, and agile
design is a refreshing take on a heavy-duty
accessory
that is all
too often
ugly and clunky.
Rated
a 2021 Best New Product by RV
PRO
magazine, the CURT
PowerRide offers an impressive suite of advanced features, including:
No
tedious welding or fabrication required for installation
Adjustable
air spring kits from Air
Lift
can effortlessly handle any load up to their GVWR, leveling your
vehicle, boosting safety, and improving passenger comfort. Now your
2021 Ford F-150 (2WD or 4WD) can reap the benefits of these legendary
kits! Air
Lift
is releasing the following part numbers for the
newest year of this
incredibly popular truck platform:
Meet Debi Bucks, the newest member of the Performance Corner® team! Debi loves showing off her personality by customizing her vehicle with aftermarket accessories. She also enjoys making extra money, so she has teamed up with her supplier friends to earn real cash through the PRO Rebates program. And so can you!
Offered exclusively through Competition Specialties, Inc., the PRO Rebates program gives you cash back on your purchases of certain suppliers during certain promotional periods throughout the year. With rebates ranging from 2% to 5%, the more you buy, the more you get back! Rebates are automatically mailed to you in the form of prepaid Visa debit cards to spend as you see fit.
Featured PRO Rebates suppliers change every month, so watch this blog, your email, or the Performance Corner® PRO Rebates page to find out which brands you should start stocking up on.
And keep your eye on the mail: every time you see Debi Bucks, you know your free cash has arrived!
PRO Rebates is back at it in 2021, and the featured vendors for May are ready to put money back in your pocket!
Buy products from the following vendors in May and get cash back based on the percentages shown. Rewards are paid via prepaid Visa debit card. That’s no-strings cash back just for buying the brands and products you normally would!
Vendors change each period, so stay tuned for announcements of upcoming vendors throughout the year! Click here for complete program information.
With
three optic zones—scene, driving, and spot—and
an internal GPS module,
Adapt XP powersports light pods
from RIGID
Industries
seamlessly transition patterns to match your vehicle’s speed. The
system also puts you in control, so
you can run with the Adapt Mode on or off.
RIGID
Adapt XP pods feature an alloy housing and heat sink,
impact-resistant polycarbonate lenses, a UV polyester powdercoat, and
a universal fit. They are available singly (PN 300414) and in pairs
(PN 300415), with each pod good for more than 50,000 hours of epic
illumination. Includes amber light covers, mounting brackets, and
hardware (wiring harnesses sold separately from RIGID).
Backed by a limited lifetime warranty. Intended for off-road use
only.
Features
Adaptive
beam patterns based on your speed
Three
optic zones: scene, driving, and spotlight
Seamless
beam transition
Turn
Adapt Mode on or off
Internal
GPS module
Alloy
housing and heat sink
Patented
optics and impact-resistant lenses
UV-resistant
polyester powdercoat
9–32
VDC
50,000+
hour lifespan
Includes
amber light covers, mounting brackets, and hardware
Wiring
harness sold separately (PN 40187 single; PN 36360 pair)
Available
in singles (PN 300414) and in pairs (PN 300415)
If
you want your truck
to
retain its factory styling, but you really need a robust,
winch-capable platform, check out Pro-Series front bumpers from
Westin
Automotive.
Pro-Series bumpers have a distinctive mid-width, low-profile look and
are engineered to accommodate winches with pulling capacities up
to 12,000 lb.
Westin
specifically
designed a recessed hawse fairlead to help achieve proper approach
angles for safer and more efficient winch operation; plus, they
included large winch area access holes and two additional
recovery/mounting points for shackles and ropes. Westin
didn’t
neglect lights, either, including the ability to fit an optional
single-row 20” LED bar.
Pro-Series
front bumpers are made with a stout 10-gauge steel outer shell and a
heavy-duty 4-gauge center section, all protected by a textured-black
finish atop an e-coated base coat and a three-year warranty. They
include all necessary mounting brackets and hardware for installation
and are compatible with Westin
TRD
PRO skid plates.
Features
Low-profile
matches OE aesthetics.
Accommodates
most winches up to 12,000 lb
10-gauge
steel frame and 4-gauge center section
Large
winch access holes and two shackle recovery points
Accepts
most single-row 20” LED bars (light bar not included)
Available
with or without a bull bar in two styles: angular or rounded
With
the TruTrack weight-distribution hitch from CURT,
no extra sway-control technology is needed. This advanced
weight-distribution system has sway control built right into the
hitch to deliver the smoothest, safest ride possible. And when you
consider the ease of setup, you’ve got towing gold.
Another
feature that
sets
apart the CURT
TruTrack
is its use of heavy-duty, adjustable support brackets to attach to
the trailer frame instead of spring bar chains. This design resists
side-to-side movement to provide more optimal alignment. The
unique spring and cam system builds up pressure to stop sway, then
relaxes to allow drivers to make smooth turns.
As
mentioned earlier, CURT
designed the TruTrack to be a breeze to install. Instead of fumbling
with frustrating
washers, users will love the system of interlocking nuts and preset
holes that allow specific tilt angles for simpler adjustment. Even
better, you don’t have to disassemble the hitch head to make those
adjustments like you do with less
advanced
products.
The
17500 kit includes the shank, trailer ball, spring bars, head,
support brackets, pin, and clip.
Features
Integrated
sway control for a smooth, safe ride when towing
Rated
at 8,000 lb
to
10,000 lb GTW (1,000 lb on tongue)
35
9/16” trunnion-style,
forged-steel spring
bars
Spring
bars can be adjusted 30 or 70 degrees (+/- 5)
Pretorqued
2 5/16” trailer ball
Brackets
use friction to resist lateral movement
2”
shank can be flipped to provide drop or rise
Hex
castle nut for easy adjustments between trailers
Tilt
adjustment simplifies setup and installation
Fits
virtually all A-frame trailers
Durable
carbide black powdercoat
Warranty:
limited lifetime (1-year finish and parts)
The
AVS Aeroskin® hood shield offers a tough defense against road
debris for your vehicle’s hood, helping to keep it looking showroom
new. The flush-mount design fits your vehicle’s hood contours
perfectly to provide the best leading-edge hood protection available
today. Made from modified acrylic, the Aeroskin gives your vehicle a
sleek and polished look. Best of all, AVS engineered it to
install easily using 3M automotive-grade tape (no drilling!).
Three
colors are available for 2021 Chevy Silverado 1500 pickups (matte
black shown):
Matte
Black (PN 377168)
Smoke
(PN 322168)
Chrome
(PN 622168)
Features
Flush-mount,
low-profile silhouette for a sleek and polished look
Protects
the hood from road debris, bugs, and dirt
