Month: September 2020

Westin Automotive: Overland Cargo Rack

David Ayers Leave a comment
Use This Post Clip for Email

The backcountry is within reach with the Overland Cargo Rack from Westin Automotive, which maximizes the cargo capabilities of your vehicle and allows for a wide variety of gear storage, from off-road jacks and gas cans to traction boards, tents, LED lighting, and more.

The Overland Cargo Rack is made from 14-gauge steel formed into 4” rectangular tubing. It uses OEM bed rails for easy, no-drill mounting, with a low-profile stance to minimize wind resistance and play nicely with garages. The top support rails can be mounted in multiple positions to accommodate a range of rooftop tent footprints. Includes all needed hardware mounting brackets.

Available in two rack lengths—45” or 57”—the Westin Overland Cargo Rack is protected by a textured-black powdercoat over a corrosion-resistant e-coated base coat.

Features

  • Engineered for most rooftop tents
  • Low-profile design keeps gear below the roofline.
  • 14-gauge rectangular steel tubing
  • No-drill installation (bolts to OEM bed rails)
  • Top support rails mount in various positions.
  • Textured-black powdercoat over e-coated base coat
  • Includes hardware and mounting brackets
  • Available rack lengths: 45” and 57”
  • Warranty: 3 years
Westin Automotive Overland Cargo Rack

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT (14005): Class 4 Trailer Hitch, 2” Receiver for Select 2020 GM HD

David Ayers Leave a comment
Use This Post Clip for Email

High-strength, one-piece American steel gives these class 4 CURT trailer hitches the ability to meet all your towing needs for work or play, commercial or noncommercial. It comes with all needed mounting hardware for a complete installation.

The 14005 CURT hitch was developed specifically for 2020 Chevrolet Silverado and GMC Sierra 2500 HD (excluding factory receiver) and 3500 HD (excluding factory receiver or cab & chassis). With capacities of 10,000 lb gross trailer weight and 1,000 lb on the tongue (also compatible with weight-distribution hitches; 12K WD, 1.2K WDTW), it can pull a variety of trailers, from equipment haulers and large utility trailers to full-size travel and boat.

The 2” x 2” receiver is welded into place and accepts any industry-standard 2” shank, plus a variety of ball mounts, pintle hitches, cargo carriers, bike racks, and other accessories. Includes a hitch tube cover to keep out dirt and debris. Engineered, manufactured, finished, and tested by CURT in the USA.

Features

  • For select 2020 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD
  • Rated to 10,000 lb gross trailer weight and 1,000 lb tongue weight
  • Compatible with weight distribution hitches (12,000 lb WD / 1,200 lb WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable, high-gloss, black powdercoat
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
  • Warranty: limited lifetime (1-year finish & parts)
CURT Class 4 Trailer Hitch for Select 2020 GM HD 14005

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Paramount Automotive: Guardian Front Bumper for ’07-’21 Jeep JK/JL/JT

David Ayers Leave a comment
Use This Post Clip for Email

The Guardian front bumper from Paramount Automotive lives up to its name, with a high-pressure, die-formed fabrication process creating extreme strength in a lighter weight. Available in mid-width (81-20301) and full-width (81-20302) styles (modular design allows for the swapping of end caps), the Guardian features a high-clearance, stylishly faceted design that works with large tires and allows for full articulation on the trail. Built for 2007–2021 Jeep Wrangler JK/JL and Gladiator JT.

Paramount Automotive designed the Guardian with a heavy-duty steel subframe capable of supporting up to a 12K lb winch, with integrated recovery shackle mounts and jack points. Both versions of the bumper are protected by a durable textured-black powdercoat and Paramount’s lifetime structural warranty (5-year finish).

Features

  • For 2007–2021 Jeep Wrangler JK/JL and Gladiator JT
  • Die-formed steel for a strong, rigid structure
  • Lightweight, but tough and refined
  • Modular, high-clearance end caps (swappable to other length, sold separately)
  • HD plate-steel subframe with winch plate (up to 12K), recovery shackle tabs, and jack points
  • Multistage textured-black powdercoat
  • Warranty: lifetime (structural), 5 years (finish)
The Guardian front bumper from Paramount Automotive lives up to its name, with a high-pressure, die-formed fabrication process creating extreme strength in a lighter weight. Available in mid-width (81-20301) and full-width (81-20302) styles (modular design allows for the swapping of end caps), the Guardian features a high-clearance, stylishly faceted design that works with large tires and allows for full articulation on the trail. Built for 2007–2021 Jeep Wrangler JK/JL and Gladiator JT. Paramount Automotive designed the Guardian with a heavy-duty steel subframe capable of supporting up to a 12K lb winch, with integrated recovery shackle mounts and jack points. Both versions of the bumper are protected by a durable textured-black powdercoat and Paramount’s lifetime structural warranty (5-year finish). Features • For 2007–2021 Jeep Wrangler JK/JL and Gladiator JT • Die-formed steel for a strong, rigid structure • Lightweight, but tough and refined • Modular, high-clearance end caps (swappable to other length, sold separately) • HD plate-steel subframe with winch plate (up to 12K), recovery shackle tabs, and jack points • Multistage textured-black powdercoat • Warranty: lifetime (structural), 5 years (finish)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Fastway: FLASH™ Integrated Scale Ball Mount

David Ayers Leave a comment
Use This Post Clip for Email

The Fastway FLASH™ Integrated Scale Ball Mount (ISBM) helps keep you safer on the road thanks to a built-in tongue weight scale. Understanding how your load is distributed allows you to achieve a better-balanced setup for improved steering, enhanced breaking control, and reduced trailer sway.

The Fastway ISBM ball mount is available in 4”, 6”, 8”, and 10” drops and includes 2” and 2 5/16” chrome hitch balls for towing with different trailers. Fits standard 2” receivers. 1,000-lb tongue weight and 10,000-lb trailer weight.

Features

  • Integrated tongue weight scale for more balanced loads and safer hauling
  • Gives you the information you need to improve steering, braking, and trailer sway
  • Ratings: 1,000-lb tongue weight and 10,000-lb trailer weight
  • Available in 4”, 6”, 8”, and 10” drops
  • Includes 2” and 2 5/16” chrome hitch balls

Fastway FLASH Integrated Scale Ball Mount

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

UWS (SL-69-LP-MB): Secure Lock™ Truck Toolbox

David Ayers Leave a comment
Use This Post Clip for Email

The SL-69-LP-MB UWS Secure Lock™ is the ultimate in truck toolbox security and convenience. Three key features set it apart. First, the dual-locking twist handles allow you to lock the box from either side, whichever is convenient at the time. The internally linked handles also allow the box to be opened from either side.

Second, the Secure Lock™ toolbox has a BedRug™ liner, not only protecting your tools and equipment from scuffs, scratches, and vibration but also making the box extremely easy to clean.

Finally, this truck toolbox is built with the UWS signature RigidCore™ lid. This lid is filled with a hardening foam that enhances strength to resist warping and ensure smooth opening and closing every time.

  • Easy-to-operate, dual-locking twist handles offer strength and maximum security.
  • Connecting rod allows for convenient operation from driver or passenger side.
  • Interior rod enclosure helps prevent bending or jamming of lock system.
  • Patented RigidCore™ foam-filled lid maximizes strength and prevents binding.
  • Removable BedRug liner protects tools, reduces noise, and allows for easy cleaning.
  • Extra-thick (0.058”), one-piece aluminum tub holds heavy tools and cargo.
  • Wide-spread handles are easy to reach from either side of the truck.
  • MicroSeal gasket helps seal out moisture, dust, and dirt.
  • Lid opens 90 degrees for easy loading and self-closes for single-hand operation.
  • Tool trays and built-in screwdriver holders for easy organization
  • Three-compartment sliding tray for convenient small item storage and retrieval
  • Easy to install with predrilled mounting slots and included hardware
  • Includes box and mounting hardware
  • Assembled in USA
  • Warranty: limited lifetime (1-year finish & parts)
UWS Secure Lock Truck Toolbox SL-69-LP-MB

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES (3047904): ActionTrac™ Powered Running Boards for 2021 Chevrolet Colorado / GMC Canyon

David Ayers Leave a comment
Use This Post Clip for Email

The 3047904 ARIES ActionTrac™ powered running boards are now available for the latest models of the Chevrolet Colorado and GMC Canyon. The automatic, fold-out boards provide easier, two-step access into the 2021 mid-size models, complementing their off-road, trail-ready style. ActionTrac™ boards are also available for a wide variety of pickups, Jeeps, and SUVs.

  • Patented step-within-a-step design for easier access—especially on large vehicles
  • 3” powered step automatically drops 8” when the door opens (up to 15” below doorsill).
  • 4” top step provides convenient access to the roof of the vehicle.
  • Housing shields retractable step, pivot points, and electronics from the elements.
  • Contoured design helps protect the rocker panels from road debris and door dings.
  • Simple-to-install system, with no-drill brackets and no-splice wiring
  • Powder-coated 6061-T6 aluminum is durable, lightweight, and noncorrosive.
  • Integrated control module detects obstructions and eliminates pinch hazards.
  • Single rotary motor for fast, quiet, maintenance-free operation
  • Integrated LED lights activate on deployment for added visibility and safety.
  • Rated for 650 lb static weight capacity (limited to mounting structure)
  • Assembled in USA
  • Warranty: limited lifetime (5-year finish, 3-year parts)
ARIES ActionTrac Powered Running Boards for Colorado Canyon 3047904

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT (13460): Class 3 Trailer Hitch, 2” Receiver for 2020 Toyota Highlander

David Ayers Leave a comment
Use This Post Clip for Email

The 13460 CURT class 3 hitch is a first-to-market receiver hitch for the 2020 Toyota Highlander. It is designed, manufactured, and tested in the USA, and it installs with no drilling required.

  • Rated to 6,000 lb gross trailer weight and 900 lb tongue weight
  • Compatible with weight distribution hitch (8,000 lb WD / 900 lb WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable, high-gloss, black powdercoat
  • Co-cured in a rust-resistant liquid Bonderite coating, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
  • Warranty: limited lifetime (1-year finish & parts)
CURT Class 3 Trailer Hitch for Toyota Highlander 13460

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive: R5 XD Nerf Step Bars

David Ayers Leave a comment
Use This Post Clip for Email

Step right up with the R5 XD nerf step bar from Westin Automotive. These bars feature a sure-footed 5” step surface with oversized step pads that sits 3” lower to the ground, making cab entry and exit easier and safer than stock.

Custom designed to fit seamlessly on your application, Westin R5 XD nerf step bars come with bars for the driver and passenger sides, plus a vehicle-specific mount kit that goes right onto your vehicle’s rocker panel. Injection-molded bracket covers provide the final finish.

And if you want to draw even more attention to your upgrade, Westin separately sells an optional R5 LED light kit (28-51003).

Available in polished stainless steel with a lifetime warranty or black powder-coated aluminum with a 3-year warranty. Tested and engineered in the USA!

Features

  • Patented, application-specific, custom fit
  • 5” step area and 3” drop
  • Oversized polymer step pads for enhanced traction and style
  • Mount directly to your vehicle’s rocker panel (mount kit included)
  • Injection-molded bracket covers
  • Materials/finish: polished 304 stainless steel or black powder-coated aluminum
  • Sold in pairs (driver and passenger steps)
  • Warranty: lifetime (polished), 3 years (black)
Westin Automotive R5 XD Nerf Step Bars

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino: Universal SRM500 Roof Rack

David Ayers Leave a comment
Use This Post Clip for Email

Low-profile rack from Go Rhino packs high-level versatility for all your gear-powered adventures. The newly designed, universal SRM500 roof rack is a reliable platform for differently sized and shaped gear, including tents, paddleboards, kayaks, bikes, tools, and other backcountry accessories. The lightweight, aircraft-grade aluminum and injection-molded nylon junctions help squeeze every last ounce from your weight capacity.

Exclusive Go Rhino 4-CORE channel technology, predrilled crossmembers, and tie-down points give you plenty of packing and light-mounting capability, while the custom clamps and rubber isolator pads attach to many styles of crossbars and eliminate vibration, respectively. These racks are protected by a textured-black powdercoat and backed by a 5-year warranty.

Go Rhino SRM500 racks are built from 2” diameter tube, measure 52” wide, and come in three lengths: 55”, 65”, and 75”. Optional model-specific Wrangler JK/JL mounting kits sold separately.

Features

  • Universal fit
  • 2” diameter tubular aluminum
  • 52” wide
  • Three lengths available: 55”, 65” & 75”
  • 4-CORE channel technology mounts most accessories
  • Front/rear crossmembers predrilled for lights
  • Rhino Clamps mount to many styles of crossbar.
  • Keyhole channel access allows use of standard hardware.
  • Tie-down points, aftermarket mounts, and additional threaded inserts
  • Rubber isolator pads minimize friction and avoid vibration.
  • Textured-black powdercoat
Go Rhino SRM500 Roof Rack

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Dee Zee: 7” Rear Rough Step for Rear Cargo Vans

David Ayers Leave a comment
Use This Post Clip for Email

For a step up that won’t let you down, the Rear Rough Step from Dee Zee comes through in the clutch. It features a grated design that provides reliable traction and keeps your cargo area clean by releasing mud, snow, dirt, and other worksite mess. Whether you’re scraping your boots on the grated-steel top or just need to keep your footing on the 7” surface, the Rear Rough Step delivers.

The Rear Rough Step is constructed from heavy-duty aluminum protected by Dee Zee’s patented NRT™ (No Rust Technology) black powdercoat, so you won’t have to worry about corrosion. Made in the USA!

Features

  • For rear cargo vans
  • Heavy-duty aluminum with grated-steel top
  • 7” wide step surface
  • NRT™ black powdercoat
  • Water, mud, and dirt drop through to keep your cargo area clean.
  • Made in the USA
  • Warranty: limited lifetime
Dee Zee Rear Rough Step

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.