Tag: tacoma

Westin Automotive: Pro-Series Front Bumpers for ’14–’21 Toyota 4Runner

David Ayers Leave a comment
Use This Post Clip for Email

If you want your Toyota 4Runner to retain its factory styling, but you really need a robust, winch-capable platform, check out the Pro-Series front bumpers from Westin Automotive. Pro-Series bumpers have a distinctive mid-width, low-profile look and are engineered to accommodate winches with pulling capacities from 8,000 to 12,000 lb.

Westin specifically designed a recessed hawse fairlead to help achieve proper approach angles for safer and more efficient winch operation; plus, they included large winch area access holes and two additional recovery/mounting points for shackles and ropes. Westin didn’t neglect lights, either, including the ability to fit an optional single-row 20” LED bar.

When it comes to the Pro-Series, Westin has given 4Runner owners some great options, including the bumper alone and with bull bars in two profiles (bull bars also available separately):

  • Front Bumper Only: 58-411155
  • Bumper WITH Angular Bull Bar: 58-411155ABK
  • Bumper WITH Round Bull Bar: 58-411155RBK
  • Angular Bull Bar Only: 58-411155AB
  • Round Bull Bar Only: 58-411155RB

Pro-Series front bumpers are made with a stout 10-gauge steel outer shell and a heavy-duty 4-gauge center section, all protected by a textured-black finish atop an e-coated base coat and a three-year warranty. They include all necessary mounting brackets and hardware for installation and are compatible with TRD PRO skid plates.

Features

  • For 2014–2021 Toyota 4Runner
  • Low-profile matches OE aesthetics.
  • Fits most 8,000–12,000 lb winches
  • 10-gauge steel frame and 4-gauge center section
  • Large winch access holes and two shackle recovery points
  • Accepts most single-row 20” LED bars (light bar not included)
  • Available with or without a bull bar in two styles: angular or rounded
  • Textured-black finish over an e-coat base coat
  • Includes hardware and mounting brackets
  • Warranty: 3 years
Westin Automotive Pro-Series Front Bumper for Toyota Tacoma

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries (46702): A-Pillar Mount for ’16-’20 Toyota Tacoma

David Ayers Leave a comment
Use This Post Clip for Email

A clean installation of RIGID Industries’ high-output light is as close as the 46702 A-Pillar mount, designed just for 2016–2020 Toyota Tacoma (other applications available). This accommodating mount is compatible with a range of RIGID products, including 4” 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance pods (lights sold separately).

Made from stainless steel and covered with a UV- and abrasion-resistant powdercoat, this RIGID A-Pillar Mount is made in the USA to outlast the harshest environments.

Features

  • For 2016–2020 Toyota Tacoma
  • Fits RIGID 4” 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance pods (lights sold separately)
  • Stainless steel with a UV/abrasion-resistant coat
  • Made in the USA
RIGID Industries A-Pillar Mount for 16-20 Toyota Tacoma 46702

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Fab Fours: Hidden Winch-Mount Front Bumper for 2014+ Toyota 4Runner

David Ayers Leave a comment
Use This Post Clip for Email

Made in the USA for adventurous spirits, the hidden winch-mount front bumper from Fab Fours is the perfect combination of form and function. Designed to retain factory tow hooks, this winch-ready product includes integrated D-ring mounts and 30” LED light bar housing (winch and light bar not included). Made from 3/16” plate steel protected by Fab Fours’ two-stage black powdercoat, with stainless steel hardware.

Available with prerunner guard (T4R-N4552-1) or without (T4R-N4551-1).

Features

  • For 2014-and-up Toyota 4Runner
  • Integrated D-ring mounts and center mount for 30” light bar (not included)
  • Superior-strength 3/16” plate steel and stainless steel hardware
  • Retains factory tow hooks
  • Two-stage black powdercoat
  • Made in the USA
  • Warranty: lifetime (structural); 2 years (coating against manufacturer defect)
Fab Fours Hidden Winch Mount Front Bumper for 2014-20 Toyota Tacoma T4R-N4552-1

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

TRIGGER (2019): Engine Bay Mount for 2016+ Toyota Tacoma

David Ayers Leave a comment
Use This Post Clip for Email

Addressing demand from the overland community, TRIGGER has released an engine bay mount (PN 2019) that eliminates the need for any custom fabrication to mount a TRIGGER controller in 2016+ third-generation Toyota Tacoma. The aluminum mount comes with all necessary hardware and uses the factory auxiliary mounting locations on the driver-side inner fender.

Features

  • For 2016-and-up Toyota Tacoma (3rd gen)
  • No-drill application mounts to driver-side inner fender using auxiliary mounting locations
  • Includes all necessary hardware
  • Aluminum construction
TRIGGER Engine Bay Mount for 2016 and Up Toyota Tacoma

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT (69-5530): 3” SST Pre-Load Lift Kit for ’05-’19 Toyota Tacoma

David Ayers Leave a comment
Use This Post Clip for Email

Answering popular demand, ReadyLIFT is giving its Toyota Tacoma customers even more ways to raise their rides. This pre-load style kit provides 3” total lift in front and 2” lift in the rear, leveraging a precision-crafted, CNC-machined billet aluminum spacer that installs between the factory spring and top hat. This design slightly increases front spring rate, reducing nose dive during braking and improving front roll during hard turns at speed. Drivers will enjoy improved factory driving mannerisms and a slightly firmer ride and handling characteristics thanks to the pre-load spacer.

Like ReadyLIFT’s traditional Tacoma lift kits, the 69-5530 pre-load kit includes 1” differential drop spacers/hardware, sway bar drop spacers, and skid plate spacers, plus the company’s legendary OE-style cast-iron rear lift blocks with proper taper and longer U-bolts.

Allows for up to a 285/65-18 tire on an 18×9 wheel with +18 mm offset (minor trimming may be required).

Features

  • For 2005–2019 MY Toyota Tacoma (6-lug, 2/4WD).
  • Increases ground clearance while allowing for larger off-road wheels and tires.
  • Allows for up to a 285/65-18 tire on an 18×9 wheel with +18 mm offset.
  • Pre-load lift engineering maintains factory alignment geometry.
  • Increases front spring rate for better nose dive control during braking.
  • Installation: bolt-on—no permanent modifications required.
  • Made in the USA.
ReadyLIFT 3 Inch SST Pre-Load Lift Kit for Toyota Tacoma 69-5530

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Matte Is the New Black: AVS Debuts Low-Profile Combo Pack

David Ayers Leave a comment
Use This Post Clip for Email

AVS, producer of the iconic Ventvisor™ and Aeroskin™ products, has struck again with a Combo Pack sure to please fans of matte-finish black accessories.

Ventvisor Flat Finish
Ventvisor Flat Finish

These new Ventvisors™ and Aeroskins™, now meaner and leaner than ever, add low-profile stealth and style to your pickup. They coordinate with OE black trim and aftermarket flat black wheels. Sold as a Combo Pack under one part number, these accessories feature AVS’s durable, UV-protected Tri-Flex ™ ABS thermoplastic and a limited lifetime warranty, so you’ll be enjoying them for years to come.

Aeroskin Flat Finish
Aeroskin Flat Finish

The AVS Matte Finish Ventvisor™/Aeroskin™ Combo Pack is available for many different applications from 2007 and up, including Dodge Ram; Chevy Silverado; GMC Sierra; Ford F-150, -250, and -350; Toyota Tundra, FJ Cruiser, and Tacoma; Jeep Wrangler; and Nissan Frontier.

Stop into your local Performance Corner retailer to check out AVS’s new Combo Pack for yourself, or find a local affiliated store using our dealer locator.

If you are an automotive aftermarket accessory retailer who would like to become part of the nationwide Performance Corner network, please join us today!

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.