Come In the Garage with us as we explore the X-Lander RS3 suspension system for Jeep Gladiator from Rancho.
Tag: Suspension
In the Garage™ with Performance Corner®: Go Rhino RB10 Step Bars
Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Ben Ramirez from Go Rhino to the garage and install their RB10 Step Bars on a 2018 Ford Super Duty.
Parts used in this video:
RB10 Step Bars (63415587T)
RB10 Step Bar Hitch Step (RB610T)
Want to check out more about Go Rhino?
https://performancecorner.com/manufacturer/go-rhino
(For California Residents)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
SuperSprings (SSF-402-54): SumoSprings Front for Jeep Wrangler JK
The patented SumoSprings suspension product from SuperSprings enhances load-carrying ability, stabilizes sway, and improves overall driver control and comfort. Manufactured from a proprietary closed microcellular urethane that provides a smooth progressive spring rate with superior damping properties, SumoSprings require no maintenance, don’t leak air, and need neither air lines nor compressors.
SuperSprings’ SSF-402-54 is designed as a front application for Jeep Wrangler JK; sold in pairs.
Features
- For Jeep Wrangler JK (front).
- Made from proprietary and patented microcellular urethane.
- Maintenance-free design improves overall driver control and ride comfort.
- Will not leak or rupture.
- Progressive spring rate with superior damping properties.
- Compresses up to 80% of original height with full memory rebound.
- 1,400 lb. capacity at 50% compression.
- Enhances load-carrying ability and reduces/stabilizes sway.
- Sold as a pair (left and right).

Rancho: Crawler Short-Arm Suspension Systems for 2018 Jeep Wrangler JL
Available for 2018 Jeep Wrangler JL (Rubicon and non-Rubicon) and allowing precise adjustments while installed on the vehicle, the new crawler short-arm suspension systems from Rancho include corner-specific, progressive-rate coil springs and fully adjustable control arms with D2 bushings to provide the comfort and durability you crave. Also included are new heavy-duty front and rear adjustable track bars with D2 bushings to center the axles. These D2 bushings feature a PTFE design for grease-free operation and reduced wear.
Note: Aftermarket driveshaft required for maximum front axle articulation.
Features
- For 2018 Jeep Wrangler JL Rubicon (RS66123B; 3.5” lift) and non-Rubicon (RS66125B; 4.5” lift).
- Corner-specific, tuned, progressive-rate coil springs.
- On-vehicle adjustable control arms with D2 bushings.
- Heavy-duty front and rear adjustable track bars with D2 bushings.
- All brackets fabricated from high-strength, low-alloy steel.
- Designed with 37” tires and 17” wheels.
- Installation: bolt-on.
Energy Suspension: Rock-Flex Suspension Systems for 2018 Jeep Wrangler JL
Though the Wrangler JL offers many advances over the JK, including a well-designed suspension featuring better geometry, the engineers at Energy Suspension believe strongly in that old saying: “There’s always room for improvement.”
The new Rock-Flex suspension system from Energy Suspension captures that adventurous spirit. Using Hyperflex performance polyurethane, Rock-Flex systems create a ride height–adjustable suspension that gives your JL the articulation, control, and off-road performance of a much more expensive off-road suspension while simultaneously enhancing on-road handling. Rock-Flex is less a replacement suspension and more a series of parts that augment the factory suspension (and overcomes the shortcomings of OE rubber components).
This innovative product addresses all the issues associated with lifting a coil sprung Jeep, correcting sway bar geometry and caster without additional modification—allowing the suspension to function properly through its entire range of motion while improving the JL’s already impressive street manners.
If you’ll be at SEMA, stop by the Energy Suspension booth (#23267) to learn more about this exciting new product.
Features
- For 2018 Jeep Wrangler JL.
- Creates a ride height–adjustable suspension.
- Increased articulation, control, and off- and on-road performance.
- Corrects sway bar geometry and caster without additional modification.
- Visit the Energy Suspension booth (#23265) at SEMA to learn more!
Rancho (RS66502R7): Level It 2” Suspension System for ’04-’08 Ford F-150
Level It suspension kits from Rancho eliminate the rake from your F-150’s front end while raising the front suspension up to 2”. Rancho’s award-winning quickLift RS7000MT monotube struts additionally provide an improved ride and a polished, aggressive look thanks to the unit’s brushed and plated design.
RS66502R7 includes a set of sway bar drop brackets to ensure a precise ride. The Level It suspension kit requires the transfer of stock factory spring and top mount during installation, and was developed using 35” tires (some trimming required).
Features
- For 2004–2008 Ford F-150.
- Levels the front of your truck.
- High-pressure monotube struts and drop sway bar brackets.
- Requires transfer of factory spring and top mount.
- Warranty: limited lifetime.






