Tag: Quick Fuel Technology

Quick Fuel Technology (36-E87QFT): EChecker E85 Fuel Test Tube

John Arnaud Leave a comment
Use This Post Clip for Email

The 36-E87QFT EChecker test tube from Quick Fuel Technology simply and accurately checks the percentage of ethanol content in your E85 pump gas. Just add water to the line, fill the rest of the way with the fuel you want to test, and shake it up! In just a few minutes, a line of separation will appear, telling you the true percentage of your fuel. Includes protective sleeve and instructions.

Features

  • Accurately checks the ethanol percentage of your E85 fuel.
  • Works in just a few minutes.
  • Just add water and fuel.
  • Includes protective sleeve and instructions.

Quick Fuel Technology EChecker E85 Fuel Test Tube 36-e85qft

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (30-200QFT): 160 GPH In-Line Billet Fuel Pump

John Arnaud Leave a comment
Use This Post Clip for Email

If your build has a nitrous or forced-induction power plant that also does street duty, or if you simply need to fuel some serious horsepower, the Quick Fuel Technology 160 GPH in-line billet fuel pump is the answer. Its twin-pump configuration lets you use one for cruising or both when you’re ready to flip the nitrous switch or start building boost. In addition, staging the second pump bypasses the need to recirculate and heat extra fuel—which can reduce performance and cause hot fuel issues.

For hard-core race vehicles, both pumps can be wired for full-time duty to get maximum performance and are proven with 18.5-volt compatibility at pressures up to 80 PSI. The 30-200QFT was engineered to greatly reduce the negative effects of heated fuel now common with many of today’s pump gas blends. And at just over 5 pounds, this pump weighs half a pound less than competitive 1,000+ HP pumps yet boasts twice the features!

Note: This product is available for use with pump or race gas. Compatible with carbureted or EFI applications. Not designed for use on aircraft of any type.

Features

  • Patent-pending dual pump design for independent or simultaneous use.
  • Durable and good-looking billet aluminum construction.
  • Improved hot fuel handling.
  • Proven durability beyond 3,000 hours in gasoline.
  • 10 AN O-ring inlet/outlet for high flow and superior sealing.
  • Fully in-tank submersible for custom applications (less space and plumbing).
  • Compatible with 12–18.5-volt systems for street or race use.
  • Compact size (7.66” x 5” x 2.5”) for easy installation on frame rails or other tight areas.
  • Weight: 5.1 lb.
  • Max current draw: 28 amps

Quick Fuel Technology 160 GPH In-Line Billet Fuel Pump

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology: Fabricated Aluminum Valve Covers

John Arnaud Leave a comment
Use This Post Clip for Email

Available for popular Small Block or Big Block Chevy, Ford, and Mopar engines, the new race-inspired fabricated aluminum valve covers from Quick Fuel Technology are available with or without 1.25” breather openings for use with vacuum pumps or dry sump engines. These lightweight, durable valve covers are made from TIG-welded 6061 T5 sheet aluminum, with a 1/4” mounting flange, laser-etched QFT logo, and heights that clear most popular rocker arm applications. Mounting hardware included; sold in pairs.

Two finishes available: Silver Anodized or Black Coated.

Features

  • Available for popular Small Block or Big Block Chevy, Ford, and Mopar
  • 100% TIG-welded 6061 T5 aluminum.
  • 1/4” one-piece billet aluminum mounting flange.
  • Available with or without 1.25” breather openings.
  • Clear many rocker arm combinations.
  • Race-inspired, laser-etched QFT
  • Includes mounting hardware for both valve covers.
  • Sold as a pair.

Quick Fuel Technology Fabricated Aluminum Valve Covers

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (SL-600-VS): Slayer Series 600 cfm VS Carburetor

John Arnaud Leave a comment
Use This Post Clip for Email

Slayer Series street carburetors from Quick Fuel Technology (QFT) come ready to roar thanks to many of the same innovations and features that are built into all QFT race-winning carburetors, including changeable air bleeds and power valve channel restrictions. They’re designed with a secondary metering plate with changeable jets plus all-aluminum components for additional weight savings. Slayer Series carburetors come with universal throttle levers to accommodate Ford A/T kickdown, GM 700 R4 mounting holes, and the ability to mount brackets for Chrysler vehicles.

SL-600-VS has a 600 cfm capacity, but other Slayer Series carbs are available with 450 and 750 cfm.

Features

  • Throttle Bore Size: 1-9/16″
  • Primary Jet: 22-68
  • Secondary Jet: 22-74
  • Idle Bleed: 26-70/26-39
  • Bleed: N/A
  • Hi-Speed Bleed: 26-31
  • Pump Nozzle: 21-31
  • Power Valve: 25-65
  • Needle & Seat: 18-1
  • Fuel Type: Gas
Quick Fuel Technology (SL-600-VS): Slayer Series 600 cfm VS Carburetor
Quick Fuel Technology (SL-600-VS): Slayer Series 600 cfm VS Carburetor

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (30-427): 427-GPH High-Output Electric Fuel Pump

John Arnaud Leave a comment
Use This Post Clip for Email

Extreme performance and extreme durability. That’s what Pro Series billet fuel pumps from Quick Fuel Technology are all about. Built for the most demanding drag racing applications, this 427-gph High-Output Electric Fuel Pump features hard anodized billet aluminum housings, a rugged six-vane pump, and epoxy-coated armatures to secure windings and extend motor life.

The pump base is integrated as the bottom end cap of the motor, promoting better pump sealing and shaft alignment. An integrated adjustable bypass valve eliminates pump cavitation and stabilizes fuel flow, while stainless steel armatures enhance corrosion resistance. Compatible with gasoline, E85, and alcohol fuels.

  • 427 gph flow and 11.7 amp draw at 25 psi.
  • Supports 800–2,500 hp.
  • Designed for drag race and other short-duration competitions.
  • 1/8” NPT gauge port.
  • Efficient 6-vane design.
  • Hard-coated anodized billet aluminum housing.
  • #10 AN inlets and outlets; #8 AN bypass port.
  • Lower pump body is machined with a bearing pocket to receive the motor shaft bearing, improving shaft alignment, reducing current draw, and improving flow.
  • Upper wear plate is integrated into the one-piece eccentric bushing for reduced friction.
  • Compatible with all fuels.
  • Flow-, pressure-, and leak-tested prior to shipment.
Quick Fuel Technology (30-427): 425-GPH High-Output Electric Fuel Pump
Quick Fuel Technology (30-427): 425-GPH High-Output Electric Fuel Pump

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor

John Arnaud Leave a comment
Use This Post Clip for Email

In circle track classes that mandate two-barrel carburetors, customizing a street carburetor has been the norm for decades. Not anymore. Newly designed to meet the unique demands of circle track racing, Quick Fuel Technology’s XP-Series carb offers the performance benefits of a custom carb in an affordable, class-legal, ready-to-run package that costs less than making each required modification separately.

XP-Series carbs boast a high-flow aluminum main body that places the venturi over the throttle-body assembly. To further increase airflow, QFT put the air horn over the venturi, removed the choke tower, and precision profiled the air inlet transition. The result: improved horsepower and throttle response. Available in 500- and 600-cfm sizes, the XP-Series has set the bar for two-barrel circle track carbs.

  • Turnkey two-barrel carb ready for the circle track.
  • High-flow aluminum main body.
  • Roller bearing seals improve throttle response and reduce shaft wear.
  • Available in 500- and 600-cfm sizes.
  • Fuel type: gas.
Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor
Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel (FX-975BLK): PRO-STREET QFX-Series Carburetors

John Arnaud Leave a comment
Use This Post Clip for Email

Quick Fuel Technology introduces its new PRO-STREET QFX-Series carburetors designed for higher-horsepower, larger-cubic-inch street engine applications. PRO-STREET QFX-Series carbs retain all the features found in larger CFM models, and they feature a specific fuel curve for exceptional street driveability. Gasoline use only.

  • 2-circuit metering
  • Black billet metering blocks
  • Power valve provision
  • Annular boosters
  • QuickLink secondary adjustment
  • Four-corner idle system

    Quick Fuel Technologies FX-975BLK
    Quick Fuel Technologies FX-975BLK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel (BD-450-VS): Black Diamond 450 CFM Four Barrel Carburetor

John Arnaud Leave a comment
Use This Post Clip for Email

Quick Fuel Technology’s new 450-CFM, 4-BBL carburetors for the street are designed for small-displacement 4-cylinder, 6-cylinder, and V-8 engines. They offer all the features found in QFT’s Slayer Series carburetors, including:

  • Side-hung / single-inlet fuel bowls
  • Changeable idle air and high-speed bleeds
  • 3-stage emulsion circuits in primary metering block
  • Changeable primary idle feed restrictions and power valve restrictions
  • QFT™ QuickSet™ vacuum secondary housing for external adjustment without changing springs
  • Notched secondary float for use with jet extensions
  • Secondary metering plate with changeable jets
  • Fully adjustable electric choke
  • Black Diamond® coating for enhanced appearance and durable finish

    Quick Fuel Technology BD-450-VS
    Quick Fuel Technology BD-450-VS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (701-1BD): Black Diamond Manifold

John Arnaud Leave a comment
Use This Post Clip for Email

Quick Fuel Technology’s 701-1BD Black Diamond® intake manifold is designed for square-bore carburetor applications on 1957-86 262-400 cid small block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, this manifold will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and bolt hole locations.

This 180° dual plane intake manifold is designed to provide the best performance for stock to street-performance engine applications to a maximum engine speed of 5,500 RPM.

This manifold comes with QFT’s exclusive Black Diamond high-temperature coating, which is impervious to underhood chemicals and fuels. The black satin finish is highly durable, reduces fuel temperature by 6%, and provides a showroom appearance.

QuickFuel Technology 701-1BD
QuickFuel Technology 701-1BD

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.