Tag: overland

ZROADZ (Z834011): Accessory Crossbars

David Ayers Leave a comment
Use This Post Clip for Email

Designed to complement the ZROADZ ACCESS Overland Rack, Accessory Crossbars let campers and explorers move larger tents over their cabs to create a more balanced load. These Accessory Crossbars, made from 10- and 14-gauge powder-coated mild steel, provide enough height to clear your vehicle’s roofline when used with the ACCESS Overland Rack. Measuring 1.5” x 2.5” x 50”, the crossbars also double as accessory bars, able to accommodate most universal accessory mounts for moving kayaks, canoes, paddle boards, and similar equipment.

ZROADZ includes soft pads to protect tents and minimize vibration and hardware for an easy installation.

Currently available for Jeep Gladiator (PN Z834011), Ford Ranger (PN Z835011), and Toyota Tacoma (PN Z839011) ACCESS Overland Racks.

Features

  • Designed to work with ZROADZ ACCESS Overland Racks
  • Creates balanced loads with larger items like tents and kayaks
  • Moves weight partly over cab, clearing the roofline
  • Made from 10- and 14-gauge powder-coated steel
  • Soft pads minimize vibration.
  • Hardware included
ZROADZ Accessory Crossbars for ACCESS Overland Racks

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino (5950000T): XRS Xtreme Rack for Jeep Gladiator JT

David Ayers Leave a comment
Use This Post Clip for Email

Mount up your way with the XRS Xtreme Rack from Go Rhino. Part of the XRS Overland Series, this rack features a 4-CORE extruded track system of slotted bars that accepts 1/4”-20 hex bolt or quick-release clamps—allowing you to mount nearly any accessory. The included Accessory Gear Plate has predrilled holes for RotopaX and MOLLE gear and can be mounted on the inside, outside, roof, or ceiling of the Xtreme Rack for even more overland cargo options. Handy 3/8-16 light-mount options provide the perfect positioning for your light effects, too.

The Go Rhino XRS Xtreme Rack bolts on for a no-drill installation. It’s compatible with most rooftop tents, with 300 lb dynamic / 600 lb static weight-rating accessories available. The steel/aluminum frame has integrated MOLLE pattern holes, 1/4-20 threaded inserts, rear-mounting holes for handles/accessories, and welded rods for extra tie-down points.

Features

  • For Jeep Gladiator JT (PN 5950000T)
  • Mount nearly any accessory with the 4-CORE extruded track system
  • Slotted bars accept 1/4”-20 hex bolt or quick-release clamps.
  • Sturdy steel and aluminum frame
  • Included Gear Accessory Plate can be mounted inside, outside, or on the roof/ceiling.
  • Includes light-mount options, MOLLE pattern holes, 1/4-20 threaded inserts, welded tie-down rods, and rear-mounting holes
  • Compatible with most rooftop tents
  • Many optional accessories available
Go Rhino XRS Xtreme Rack for Jeep Gladiator JT

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ZROADZ (Z834101): Overland Bed Rack with 3” LED Pod Lights for ’19-’20 Jeep Gladiator

David Ayers Leave a comment
Use This Post Clip for Email

Crown your 2019–2020 Jeep Gladiator with an additional 800 lb on-road or 400 lb off-road load capacity—plus four 3” LED light pods—with the ZROADZ Overland truck bed rack. The first truck bed accessory mounting system engineered with bed access doors, the Overland rack is designed for lighter, larger accessories that don’t need to take up valuable bed space. Spare fluid containers, traction pads, and other similar items weighing up to 30 lb can be mounted and lifted out of the way on the aluminum door frames.

The Z834101 Overland rack is constructed from TIG-welded heavy-gauge steel and aluminum protected by a three-step, textured-black powdercoat. Bolts on for a no-drill installation. The included ZROADZ Cree LED light pods shine with 1,712 lumens at 20 watts per light in a flood beam pattern (wiring harness included; IP68 and IP69K rated). Designed and manufactured in the USA.

Features

  • For 2019–2020 Jeep Gladiator (bolt-on installation)
  • TIG-welded with three-step, textured-black powdercoat
  • Accessory mounting plates throughout framework
  • Load capacity: 1,500 lb (static), 800 lb (on-road), 400 lb (off-road)
  • Four 3” ZROADZ LED light pods and universal wiring harness
  • Accepts most 2” LED pod lights with provisions to route power wires
  • Multi-slot and through-hole accessory mounting provisions
  • Steel-channel primary support members and aluminum-channel secondary support members
  • Warranty: limited lifetime (product), 3 years (finish)
ZROADZ Overland Truck Bed Rack for Gladiator Z834101

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

TRIGGER (2019): Engine Bay Mount for 2016+ Toyota Tacoma

David Ayers Leave a comment
Use This Post Clip for Email

Addressing demand from the overland community, TRIGGER has released an engine bay mount (PN 2019) that eliminates the need for any custom fabrication to mount a TRIGGER controller in 2016+ third-generation Toyota Tacoma. The aluminum mount comes with all necessary hardware and uses the factory auxiliary mounting locations on the driver-side inner fender.

Features

  • For 2016-and-up Toyota Tacoma (3rd gen)
  • No-drill application mounts to driver-side inner fender using auxiliary mounting locations
  • Includes all necessary hardware
  • Aluminum construction
TRIGGER Engine Bay Mount for 2016 and Up Toyota Tacoma

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT (69-6025): 2.5” SST Lift Kit for 2020 Jeep JT Gladiator

David Ayers Leave a comment
Use This Post Clip for Email

A great mild-lift solution for the 2020 Jeep JT Gladiator, the 69-6025 2.5” SST lift kit from ReadyLIFT is a well-engineered way to achieve a higher stance and the ability to install larger wheels and tires—all while maintaining the all-important factory ride quality.

Offering 2.5 inches of lift in the front and 2.0 inches of rear lift for both Rubicon and non-Rubicon models, this ReadyLIFT kit lets you retain the factory shocks and springs while including new bump stop extensions to control articulation extremes.

Features

  • For 2020 Jeep JT Gladiator
  • Maintains the factory shock and spring components to ensure OEM ride and handling.
  • Increased clearance for aftermarket tires (up to 37” on Rubicon; 35” Overland/Sport).
  • Two 2.5” heavy-duty front coil spring top mount spacers
  • Two 2.0” heavy-duty rear coil spring top mount spacers
  • Front/rear bump stop extensions, front shock extensions, longer rear sway bar end links, and brake line drop brackets
ReadyLIFT 2.5 Inch SST Lift Kit for 2020 Jeep JT Gladiator 69-6025

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.