Tag: ls swap

DEI (011001): Coil Pack Heat Shield for LS Engines

David Ayers Leave a comment
Use This Post Clip for Email

Precut heat shields install easily under the coil bracket to reduce radiant heat from the engine and exhaust. With a radiant heat resistance up to 1,350°, the DEI 011001 heat shield eliminates the need to relocate coil packs and prevents premature coil failure due to overheating. Compatible with factory and aftermarket coils and brackets.

Features

  • For use with LS engines.
  • Semi-rigid shield made from double-sided aluminum and high-temperature foam core.
  • Insulates and reflects heat to extend coil life.
  • Sold in pairs.

DEI Coil Pack Shield for LS Engines 011001

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker BlackHeart: LS Swap Engine Mounting Brackets for ’82-’04 GM S-10/Sonoma

David Ayers Leave a comment
Use This Post Clip for Email

Hooker BlackHeart, the leader in engine swaps, has just released engine mounting brackets for 1982–2004 GM S-10/Sonoma trucks with LS engines. The brackets (PN 71221029HKR) are designed to be used with BlackHeart transmission crossmembers; together, these products create a trouble-free installation with optimized drivetrain angles.

Note: Installation of these brackets requires the use of new stock OE 4th-gen F-body LS engine mounts (e.g., GM 22179268 or Anchor 3064) or aftermarket polyurethane inserts (e.g., Prothane 7-512 or Energy Suspension 3-1151).

Features

  • For 1982-2004 S-10 and Sonoma 2WD trucks.
  • Replicates the factory engine/transmission inclination angle.
  • For use with Hooker BlackHeart transmission crossmembers ( PN 71222020HKR, 71222019HKR, or 71222018HKR).
  • Easy installation—no fabrication necessary.
  • Durable powdercoat and 100% hand-welded construction.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart LS Swap Brackets for GM S-10 and Sonoma

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker BlackHeart: LS Swap Engine Brackets for ’79-’95 Mustang

David Ayers Leave a comment
Use This Post Clip for Email

Hooker BlackHeart has added to the growing engine swap marketplace with engine mounting brackets for 1979–1995 Fox body/SN95 Mustang. Available for stock, Maximum Motorsports, AJE, and Team Z K-members, these brackets are designed to be used with Hooker transmission crossmembers to maintain the stock OE engine offset for compatibility with Hooker Blackheart LS swap headers.

Features

  • For 1979–1995 Mustang (Fox body or SN95) LS swaps.
  • K-member compatibility: stock, Maximum Motorsports, AJE, and Team Z.
  • For use with Hooker transmission crossmembers.

Hooker BlackHeart LS Swap Brackets for Mustang

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker BlackHeart: 304 SS Long-Tube Headers for ’79-’93 Ford Mustang LS Swap

David Ayers Leave a comment
Use This Post Clip for Email

Doing an LS swap for your 1979–1993 Ford Mustang with Fox body? Hooker BlackHeart has your long-tube headers, which provide excellent ground and component clearance and are designed specifically to work with Hooker BlackHeart transmission crossmembers and engine mounts for a trouble-free installation. Constructed from 18-gauge, mandrel-bend 304 stainless steel for maximum strength and durability and backed by a limited lifetime warranty. All hardware included. Ask for part number 70101350-RHKR.

Features

  • Lightweight, 18-gauge, mandrel-bent stainless steel.
  • 1-7/8” primary tubes and long-transition 3” collectors with merge spears for maximum flow and increased exhaust velocity.
  • 3/8” thick, CNC-waterjet header flanges for strength and maximum sealing surface.
  • Compatible with stock or multiple validated aftermarket engine K-members.
  • Compatible with the stock steering shaft/rag joint coupler (stock K-member only) and aftermarket steering shafts.
  • Designed to work specifically with Hooker BlackHeart transmission crossmembers and engine mounts.
  • Hand-welded construction for strength, longevity, and good looks.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart Long Tube Headers for Mustang LS Swap 70101350-RHKR

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2016 Performance Corner™ Vendor Showcase presents: Flex-a-Lite

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Performance Corner™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Matt Smith goes over what’s new for 2016.

Want to know more about Flex-a-Lite? Click here:
https://www.performancecorner.com/manufacturer/flex-a-lite

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley (241-112): Tall LS Aluminum Valve Covers – Satin Black

David Ayers Leave a comment
Use This Post Clip for Email

If you’re ready to add a custom look to your engine bay, 241-112 Tall LS Valve Covers from Holley will set you apart from the crowd. Adding to Holley’s already-impressive lineup of LS engine components, this product is designed to add 0.54” of internal clearance over factory height valve covers.

Boasting Holley’s signature integrated angled coil mounts, these covers fit LS1, LS2, LS3, LS6, and LS7 engines using coils with a standard LS3 bolt spacing of 72 mm. They come ready to install with an OE-style baffle and ventilation system and lengthened factory-style mounting hardware, and include a billet aluminum oil fill cap. Satin black finish.

  • Angled coil mounts deliver a smooth, clean look.
  • Retain the high-tech look and performance of “coil on cover.”
  • Eliminate unsightly OE-style coil brackets.
  • Billet aluminum oil fill cap.
  • Reuse original gaskets and bolts.
  • Compatible with LS1, 2, 3, 6, and 7 coils with 72 mm bolt spacing.
  • Add 0.54” internal clearance over factory covers.
  • Proven OE-style baffles and vents.
  • 241-112 features a satin black finish; other finishes include polished, glass red, and natural cast.
Holley (241-112): Tall LS Aluminum Valve Covers - Satin Black
Holley (241-112): Tall LS Aluminum Valve Covers – Satin Black

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.