Tag: jeep

In the Garage™ with Performance Corner®: Rugged Ridge Elite Fast Track Mounting System

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Pat Johnson from Rugged Ridge to the garage and install their Elite Fast Track Mounting System on a 2018 Jeep Wrangler JK.

Parts used in this video:

Elite Fast Track Light Bar (11232.50)

Elite Fast Track Mounting System, 50 inch light bar (11232.52)

Elite Fast Track Light Bar Kit (11232.53)

Elite Fast Track Kit, includes 1 light bar, 4 round lights, quick release mirrors (11232.54)

Want to check out more about Rugged Ridge?
https://www.performancecorner.com/manufacturer/rugged-ridge

 

(For California Residents)
WARNING: ATTN: STATE OF CALIFORNIA CONSUMERS WARNING: CANCER AND REPRODUCTIVE HARM – WWW.P65WARNINGS.CA.GOV

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES (2186002): TrailCrusher Front Bumper with Trail Guard for 2018 Jeep JL

David Ayers Leave a comment
Use This Post Clip for Email

With a stinger-style angular steel brush guard that adds an aggressive look and helps protect your winch out in the wild (winch not included), the 2186000 TrailCrusher front bumper from ARIES offers all the functionality and style you crave.

The integrated winch platform features standard mounting locations to fit most winch types and welded shackle mounts that accept any shackle with a 7/8” diameter pin, with a winch-and-shackle rating of 12.5K pounds. The 2186002 is a custom-fit application for your 2018 Jeep Wrangler JL. It goes on with no drilling and comes with a durable carbide powdercoat to protect from hazards seen and unseen.

Includes bumper, brush guard, and mounting hardware.

Features

  • 12,500 lb. winch-and-shackle rating for ultimate off-road functionality.
  • Standard winch mounting platform accepts most types of winches.
  • Welded shackle mounts and 1/4” sleeves provide reliable anchoring points.
  • Shackle mounts accept pins up to 7/8” in diameter (#2166071 recommended).
  • No-drill install uses factory mounting points with no pump relocation required.
  • One-piece construction with 3/16” steel plates for maximum strength.
  • Narrow width and high ground clearance for an improved off-road style.
  • Durable carbide black powdercoat with rust-resistant E-coat finish.
  • Angular brush guard helps protect the winch and adds an aggressive look.
  • Center round cutouts accept OE bumper lights.
  • Includes mounting hardware and 3/8” installation brackets.
  • Warranty: limited lifetime (3-year finish, 1-year parts).

ARIES TrailCrusher Front Bumper with Trail Guard for Jeep JL

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge: Get $75 Back on All Tube Doors

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good December 1–31. Click image for printable form and complete details!

 

Rugged Ridge $75 Back on Tube Doors

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Bushwacker (10923-07): Flat-Style Fender Flares for 2018 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

Bushwacker flat-style fender flares are the first and only flat-style flares made to absorb impact using the company’s proprietary Dura-Flex 2000 TPO—the thickest, most flexible material around. These flares maximize your tire coverage and wheel articulation for intense off-road adventures, yet they’re carefully engineered to install with a minimum of tools and bodywork (mounting hardware included).

Bushwacker designed the 10923-07 flat-style fender flares to integrate neatly with your JL’s factory rocker guards and incorporated DOT-compliant LED side marker lights and fully molded wheel well protection. The flares are also 100% UV shielded to stop chalking in its tracks. If you want the look and real-world performance that best fits an American icon, nothing goes with your Jeep better than Bushwacker flat-style fender flares, which features a smooth black finish. Set includes four flares.

Features

  • For 2018 Jeep Wrangler JL (all models).
  • Thick and flexible Dura-Flex 2000 TPO material.
  • Include DOT-compliant side marker LEDs and wheel well protection.
  • 100% UV protected.
  • Finish: Smooth Black.

Bushwacker Flat Style Fender Flares for Jeep Wrangler JL 10923-07

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Daystar (KJ09177KV): 2” Lift Kit for 2018 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

For new Jeep Wrangler JL owners looking for a level stance, room for larger tires, greater articulation and ground clearance, and 2” of lift, Daystar has your lift package. The JK09177KV kit includes four Kevlar-infused polyurethane spacers, lower control arms, sway bar links, and extended bump stops. Run up to 35” tires on non-Rubicon models or 37” tires on your Rubicon. As with all Daystar packages, this Made-in-the-USA 2” lift kit reduces noise, vibration, and harmonics.

Features

  • For 2018 Jeep Wrangler JL.
  • Kevlar-infused polyurethane spacers.
  • Extended bump stops.
  • Lower control arms.
  • Sway bar links.
  • No-weld design is easy to install.
  • No metal-on-metal contact.
  • Made in the USA.
  • Warranty: Go Everywhere lifetime limited.

Daystar 2 Inch Lift Kit for 2018 Jeep Wrangler JL KJ09177KV

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rancho: Crawler Short-Arm Suspension Systems for 2018 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

Available for 2018 Jeep Wrangler JL (Rubicon and non-Rubicon) and allowing precise adjustments while installed on the vehicle, the new crawler short-arm suspension systems from Rancho include corner-specific, progressive-rate coil springs and fully adjustable control arms with D2 bushings to provide the comfort and durability you crave. Also included are new heavy-duty front and rear adjustable track bars with D2 bushings to center the axles. These D2 bushings feature a PTFE design for grease-free operation and reduced wear.

Note: Aftermarket driveshaft required for maximum front axle articulation.

Features

  • For 2018 Jeep Wrangler JL Rubicon (RS66123B; 3.5” lift) and non-Rubicon (RS66125B; 4.5” lift).
  • Corner-specific, tuned, progressive-rate coil springs.
  • On-vehicle adjustable control arms with D2 bushings.
  • Heavy-duty front and rear adjustable track bars with D2 bushings.
  • All brackets fabricated from high-strength, low-alloy steel.
  • Designed with 37” tires and 17” wheels.
  • Installation: bolt-on.

Rancho Crawler Short Arm Suspension Systems for Wrangler JL

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: Bestop Trektop™ NX

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we install the Trektop™ NX from Bestop on a 2018 Jeep Wrangler JK.

Parts used in this video:

Trektop™ NX (56853-17)

Want to check out more about Bestop?
https://www.performancecorner.com/manufacturer/bestop

(For California Residents)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rampage Products: Get a $100 Prepaid Card on Trailview and Complete Soft Top Purchases

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer valid October 1 to December 31. Click image for printable form and complete details!

 

Rampage 100 Card on Trailview and Complete Soft Top

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Bestop: Sunrider for Hardtop for 2018 Jeep Wrangler JL/JLU

David Ayers Leave a comment
Use This Post Clip for Email

If the open-air experience of wind and sun is one of the reasons you wanted a Jeep Wrangler JL in the first place, the Sunrider for Hardtop from Bestop provides easy access to those wild elements—from right beneath your hard top!

The Sunrider for Hardtop is the first and only product that provides instant access to an open-air driving experience without leaving the front seat of your JL: just flip it back and enjoy. Available in Black Diamond and Black Twill, Bestop’s patented Sunrider for Hardtop is the all-weather, all-purpose, all-year answer to bulky factory Freedom Panels.

Features

  • For 2018+ Jeep Wrangler JL and JL Unlimited with factory hard top.
  • Installs with no drilling or modifications.
  • All-purpose, all-weather, year-round functionality.
  • Includes preinstalled fabric-on-frame assembly, door rails, and instructions.
  • Available in 28 oz. Black Diamond or 30 oz. Black Twill acrylic fabric.
  • Warranty: limited lifetime on Black Twill; 5 years on Black Diamond.

Bestop Sunrider for Hardtop Jeep Wrangler JLBestop Sunrider for Hardtop Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Energy Suspension: Rock-Flex Suspension Systems for 2018 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

Though the Wrangler JL offers many advances over the JK, including a well-designed suspension featuring better geometry, the engineers at Energy Suspension believe strongly in that old saying: “There’s always room for improvement.”

The new Rock-Flex suspension system from Energy Suspension captures that adventurous spirit. Using Hyperflex performance polyurethane, Rock-Flex systems create a ride height–adjustable suspension that gives your JL the articulation, control, and off-road performance of a much more expensive off-road suspension while simultaneously enhancing on-road handling. Rock-Flex is less a replacement suspension and more a series of parts that augment the factory suspension (and overcomes the shortcomings of OE rubber components).

This innovative product addresses all the issues associated with lifting a coil sprung Jeep, correcting sway bar geometry and caster without additional modification—allowing the suspension to function properly through its entire range of motion while improving the JL’s already impressive street manners.

If you’ll be at SEMA, stop by the Energy Suspension booth (#23267) to learn more about this exciting new product.

Features

  • For 2018 Jeep Wrangler JL.
  • Creates a ride height–adjustable suspension.
  • Increased articulation, control, and off- and on-road performance.
  • Corrects sway bar geometry and caster without additional modification.
  • Visit the Energy Suspension booth (#23265) at SEMA to learn more!

Energy Suspension Rock-Flex Suspension System for Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.