Tag: ignition control

MSD Performance (6415): 6EFI Universal Ignition Control

David Ayers Leave a comment
Use This Post Clip for Email

Made to complement your MSD Performance Atomic EFI (or other aftermarket electronic fuel injection), the 6EFI ignition control is a universal product designed to work in harmony with EFI systems (on 4-, 6-, or 8-cylinder engines) and comes with detailed wiring instructions to make installation a breeze.

The 6415 6EFI produces numerous benefits, including increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire RPM range. It also offers capacity discharge technology, which fires a series of multiple sparks that last for 20 degrees of crankshaft rotation when the engine is running at lower RPM. Finally, MSD gave this product an adjustable rev limiter (via rotary dials in 100 RPM increments) to protect your engine in the event of a missed shift or driveline failure.

Features

  • Specially designed for EFI systems.
  • Compact housing.
  • Detailed instructions included.
  • Capacitive discharge technology.
  • Integrated rev limiter.
  • Works with 12V distributed electrical systems.
  • Easily connects to magnetic pickup, electronic, and even points distributors.

MSD Performance 6EFI Universal Ignition Control

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance (85801): Billet Distributor with Steel Gear for Ford 351C-460 Big Blocks

David Ayers Leave a comment
Use This Post Clip for Email

MSD Performance’s Ford big block billet distributor* now comes with a steel gear installed for specific camshaft requirements.

The 85801 features stainless steel terminals and an easily adjustable mechanical advance assembly that has been fine blanked from chrome-moly steel, TIG welded for strength, and QPQ coated. Precision weights glide on nylon bushings for a smooth advancement, and stop bushings and springs allow for a variety of advance curves.

Guided by a long sintered bushing and sealed ball bearing, the advance/reluctor steel shaft has been coated with a friction-reducing agent, a combination that provides spark delivery at any RPM and stable timing signals. MSD’s maintenance-free and race-proven magnetic pick-up handles triggering chores.

Note: Must be used with an MSD ignition control.

*Will not clear some factory-style Shaker hood scoops.

Features

  • CNC-machined billet aluminum housing and DuPont Rynite base.
  • Preinstalled with quality steel gear.
  • Supplied Cap-A-Dapt and rotor (accepts MSD socket-style caps).
  • Mechanical advance assembly can be locked out for crank trigger systems.
  • Nylon pads ensure smooth advance weight operation.
  • Advance weight pins are staked and TIG welded to the plate.
  • Advance plate/weights are fine blanked from chrome-moly steel and QPQ coated for friction reduction.
  • Polished steel shaft is QPQ coated and guided by a sealed ball bearing.
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout RPM range.
  • Easy-to-adjust mechanical advance with supplied springs and stop bushings.

MSD Performance Billet Distributor with Steel Gear for Ford Big Block 85801

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance (6427): 6CT Circle Track Ignition Control

David Ayers Leave a comment
Use This Post Clip for Email

Coming soon from MSD Performance is the 6CT: the most advanced ignition control ever to hit a circle track. The 6427 is packed with features, including a large digital LED display that makes it easier than ever to see the rev limiter setting (adjustable via laser-etched rotary dials).

Speaking of, the microprocessor-controlled rev limiting is so smooth, your chassis will virtually be undisturbed when charging into turns. The rotary dials let you select for 4-, 6-, and 8-cylinder engines and achieve 0⁰, 10⁰, or 20⁰ timing retard for quick starts. Plus, the LED display can be used as a live tach or to display your car’s battery voltage. MSD also designed the unit to record the highest RPM your engine turned during the race. The 6CT offers all this and more in a fully potted, tamper-proof housing that uses a single connector to keep wiring tidy.

Features

  • Works with 4-, 6-, and 8-cylinder engines.
  • Large, easy-to-read LED display.
  • Check rev limit, highest RPM, cylinder select, battery voltage, start retard, and tach mode.
  • Start retard is adjustable in 0⁰, 10⁰, and 20⁰
  • Full delivery of spark energy down to 6V battery supply.
  • Efficient, low-current draw extends battery life.
  • Fully potted housing stands up to demanding race conditions.
  • Single plug-in connector for clean wiring.
  • Tamper-proof screws prevent unit modification.
  • Reverse polarity and overheat protection.

MSD Performance 6C Ignition Control for Circle Track

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance (64253): Digital 6AL Ignition Control with Rev Limiter (Black)

MSD Performance (64253): Digital 6AL Ignition Control with Rev Limiter (Black)

David Ayers Leave a comment
Use This Post Clip for Email

MSD Performance has upped the ante on its analog 6AL, the ignition control that had already set the standard in the category. Redesigned for the first time in 25 years and available in black (64253) in addition to the familiar red, the now-digital 6AL produces more power with less energy, all in a more compact housing. In addition, the single connector creates a tidier visual profile and facilitates installation.

Perhaps of most interest to enthusiasts is MSD’s inclusion of an easily adjustable rev limiter, now located on top of the housing; the two rotary dials let you set the limit in 100 rpm increments—no more plug-in rpm modules! The 6AL’s microprocessor monitors and controls every firing and rev limit, delivering more than 530 volts to the coil with up to 135mJ of spark energy for every firing! As a bonus, the integrated LED lets you know you’ve got voltage and blinks to signify a trigger signal.

Features

  • High output: 530V and 135mJ of spark energy.
  • Efficient components use less current to produce more power.
  • Set an rpm limit with two rotary dials in 100 rpm increments.
  • Built-in LED for system checks.
  • All wires exit through a single locked, sealed connector.
  • Accepts trigger inputs from breaker points, amplifiers, and magnetic pickups.
  • Compatible with 4-, 6-, or 8-cylinder engines with 12V negative ground systems.
  • Includes wiring harness and installation components (plus vibration mount).
MSD Performance (64253): Digital 6AL Ignition Control with Rev Limiter (Black)
MSD Performance (64253): Digital 6AL Ignition Control with Rev Limiter (Black)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edlebrock: Pro-Flo 3 EFI System for Chevy

David Ayers Leave a comment
Use This Post Clip for Email

If you desire the performance and look of true fuel injection, but have always been intimidated by the complexity involved in tuning calibrations and related tables, the Pro-Flo 3 from Edelbrock is your solution.

This kit requires NO laptop tuning. Pro-Flo 3 uses an optional 7″ touchscreen tablet or your Android phone with E-Tuner app and self-mapping fuel technology to simplify the tuning experience. The E-Tuner app contains dyno-tuned base calibrations for your specific application to simplify getting up to speed. Plus, it allows you to use your phone to tune and monitor the system!

  • Ready to run right out of the box.
  • Self-mapping fuel technology—no tuning experience required!
  • Automatic compensation for altitude and weather
  • Dedicated support staff.
  • Optional ignition control.
  • Free complementary E-Tuner app.
  • Includes fully assembled wiring harness.
Edlebrock: Pro-Flo 3 EFI System for Chevy
Edlebrock: Pro-Flo 3 EFI System for Chevy

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.