Tag: ford

NOS (02125NOS): Complete Nitrous Kit for ’11-’17 Ford Coyote

David Ayers Leave a comment
Use This Post Clip for Email

The new NOS wet nitrous kit for 2011–2017 Ford Mustang with the Coyote engine features a mini two-stage progressive controller for exceptionally smooth power delivery. Made from billet 6061-T6 aluminum, the plate of the 02125NOS is anodized black to look great under the hood. To ensure a professionally installed look, NOS is including a stainless steel solenoid bracket with custom bent hard lines.

Additionally available as a plate-only kit (13125NOS).

Features

  • Fits 2011–2017 Ford Mustang with Coyote V8.
  • Fits both standard and 302 Boss manifolds.
  • Includes a NOS mini two-stage progressive controller (15974NOS).
  • Exceptionally smooth power delivery.
  • Single 1/2” plate between the throttle body and manifold.
  • Black-anodized 1/2” 6061-T6 aluminum construction.
  • Supports up to 250 rear wheel horsepower (RWHP).
  • Includes jetting for 75, 100, 125, and 150 RWHP.
  • Includes a 10 lb. NOS Blue nitrous bottle with brackets.
  • Plate-only kit available (13125NOS).

NOS Complete Nitrous Kit for Coyote 02125NOS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

T-Rex Grilles: Revolver Series Grilles for 2017 Ford Raptor

David Ayers Leave a comment
Use This Post Clip for Email

Give the 2017 Raptor better vision with a Revolver Series grille from T-Rex Grilles. Styled after the popular ZROADZ series, these replacement-style grilles feature an exclusive laser-cut Revolver repeating pattern, one-piece construction, and removable aluminum accent trim that can easily be paint matched.

This all-new series comes with a four-unit array of 6” single-row light bars and reuse the factory amber clearance lights. T-Rex Revolver grilles are finished with a black polyurethane powdercoat and carry a lifetime structural warranty and a three-year finish warranty. If you want to make a statement, Revolver series grilles are sure make an already impressive truck even better.

Applications available for trucks with forward-facing camera (6515671) or without (6515661).

Features

  • Insert/replacement-style grille.
  • Precision laser cut.
  • Includes four 6” LED light bars.
  • Installs with common hand tools.
  • Limited lifetime structural warranty.
  • Limited 3-year finish warranty.

T-Rex Grilles Revolver Series Grille Submitted

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

T-Rex Grilles: Grille Replacements for 2017 Ford Super Duty with Forward-Facing Camera

David Ayers Leave a comment
Use This Post Clip for Email

Designed to address 2017 Ford Super Duty models with forward-facing cameras are eight new replacement grilles across four series from T-Rex Grilles. To achieve this, T-Rex fixes the camera components via provided brackets, retaining all the original functionality of the camera and its washer. These grilles go on in a matter of minutes using common hand tools, and require no cutting, welding, or drilling!

Options

  • Torch AL Series: PNs 6315495 (brushed aluminum mesh/trim), 6315493 (black mesh and brushed aluminum and trim), and 6315491 (black mesh and black mesh/trim)
  • Torch Series: PNs 6315371 (chrome badging/studs) and 6315371-BR (black badging/studs)
  • X-Metal Series: PNs 6715371 (chrome badging/studs), 6715371-BR (black badging/studs)
  • ZROADZ: PN Z315371

T-Rex Grilles Replacement Grille for Ford Super Duty with FF Camera

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2016 Performance Corner™ Vendor Showcase presents: WARN

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Performance Corner™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Corby Phillips talks about what’s new for 2016.

Want to know more about WARN? Click here:
https://www.performancecorner.com/manufacturer/warn

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology: Fabricated Aluminum Valve Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available for popular Small Block or Big Block Chevy, Ford, and Mopar engines, the new race-inspired fabricated aluminum valve covers from Quick Fuel Technology are available with or without 1.25” breather openings for use with vacuum pumps or dry sump engines. These lightweight, durable valve covers are made from TIG-welded 6061 T5 sheet aluminum, with a 1/4” mounting flange, laser-etched QFT logo, and heights that clear most popular rocker arm applications. Mounting hardware included; sold in pairs.

Two finishes available: Silver Anodized or Black Coated.

Features

  • Available for popular Small Block or Big Block Chevy, Ford, and Mopar
  • 100% TIG-welded 6061 T5 aluminum.
  • 1/4” one-piece billet aluminum mounting flange.
  • Available with or without 1.25” breather openings.
  • Clear many rocker arm combinations.
  • Race-inspired, laser-etched QFT
  • Includes mounting hardware for both valve covers.
  • Sold as a pair.

Quick Fuel Technology Fabricated Aluminum Valve Covers

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Husky Liners (59481): Rear Mud Guards for 2017 Ford Super Duty Dually

David Ayers Leave a comment
Use This Post Clip for Email

Want to protect your 2017 Ford F-250 or F-350 dually from the hazards of the road? Husky Liners has got you covered (literally) with rear mud guards fabricated from all-weather, impact-resistant thermoplastic that’s tough enough to keep up with you. Plus, they’re wide enough to provide full tread coverage. Husky Liners’ black-textured 59481 rear mud guards are easy to install (no drilling!) and conform perfectly to your fat fenders for a seamless look.

Features

  • Custom fit for your 2017 Ford Super Duty dually.
  • Tough, durable thermoplastic endures extreme conditions.
  • Full tire coverage with maximum length.
  • Black textured finish and sleek, contoured design.
  • Includes all necessary fasteners and instructions.
  • No drilling required.
  • Made in the USA.

Husky Liners Rear Mud Guards Ford Super Duty Dually

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

BedRug: XLT Mat

David Ayers Leave a comment
Use This Post Clip for Email

With an all-new tailgate hinge, the XLT mat from BedRug uses the company’s original soft and durable BedRug material to cushion bed work and resist the threats of day-to-day adventure. The XLT features a 3/4” padded floor, a flat, anti-skid work surface, and an integrated tailgate gap and guard hinge. It goes on in 15 minutes or less.

Eleven applications are currently available—including for GM Silverado/Sierra, Ford F-150 and Super Duty, and Ram—with more coming by June.

Features

  • BedRug top surface for a softer feel.
  • 3/4” padded floor for impact protection.
  • Flat work surface.
  • Integrated tailgate gap and guard hinge.
  • Anti-skid surface.
  • Installs in 15 minutes or less.

BedRug XLT Mat

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Vision X: Optimus LED Fog Light Kit for 2017 Ford F-150 Raptor

David Ayers Leave a comment
Use This Post Clip for Email

No factory fog light option? No problem! Vision X has your 2017 Ford F-150 Raptor covered with the Optimus LED fog light kit, which lets you to use all that awesome suspension and horsepower on the trail at night. This kit’s four 3” Optimus LEDs shine up to 883 feet of usable bright-white light from each 10-watt top-binned Cree bulb while drawing only 3.33 total amps of power. Plus, it’s durable enough for the rough ride, sporting 6061 aluminum, shatter-resistant polycarbonate lenses, and sturdy trunnion brackets.

If you’re looking to take the look to the next level, the optional white or amber Halo versions of this part will turn heads and give your Raptor the extra style you crave. (Amber Halos coming May 17; preorders available!)

Features

  • Available in 15-degree kits (with Halo) or a 10-degree kit (without Halo).
  • Four 3” Optimus LED lights.
  • Iris reflectors boost the usable light range to 883’.
  • Simple plug-and-play installation.
  • Warranty: lifetime limited.

Vision X Optimus Fog Light Kit for Ford Raptor

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock: New-Look Black-Coated Flathead Components for Ford

David Ayers Leave a comment
Use This Post Clip for Email

Edelbrock’s iconic “Slingshot” intake manifolds—dual, triple, and even single-quad—are now available with a black-coated finish to match early- or late-model Edelbrock cylinder heads. The Edelbrock script and block letter logo are highlighted for that extra detail. All Edelbrock flathead components are cast and machined in America for the best quality—just like Vic Edelbrock Sr. did in the 1930s.

In addition, don’t miss the many related components that Edelbrock offers for the Ford flathead market, including 94 carburetors (primary and secondary), 94 carburetor heat insulators and chrome air cleaners, carburetor linkage kits (dual and triple deuce), fuel distribution blocks (dual, triple, and quad), low fuel pressure regulators, generator brackets (straight and offset, early and late model), cylinder head stud kits (early and late model), and individual and complete head gasket sets.

Features

  • New black powder-coated finish.
  • Highlighted Edelbrock script and block letter logo.
  • Cast and machined in the USA.

Edelbrock Black Powder-Coated Flathead Components for Ford

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech: 1-7/8” Shorty Headers for ’11-’14 Mustang 3.7L V6

David Ayers Leave a comment
Use This Post Clip for Email

If you’re using a cold air intake, cat-back exhaust, or tuner on your 2011–2014 Mustang 3.7L, these 1-7/8” shorty headers from Flowtech are the upgrade you need to take your ride to the next level.

Providing a terrific combination of quality and value, these headers offer consistent tubing diameters, smooth flow, and increased exhaust velocity thanks to mandrel-bent 409 stainless steel (or 304 SS) set in heavy-duty, 16-gauge tubing. In addition, the 1-7/8” diameter primary tubes offer improved throttle response. Premium aluminum gasket headers are included, and three finishes are available: Natural (12140FLT; 409 SS), Polished (12141FLT; 304 SS), and Silver Ceramic (32141FLT; 409 SS).

Features

  • Mandrel-bent 409 stainless steel (12140FLT & 32141FLT) or 304 stainless steel (12141FLT).
  • Consistent tubing diameters for smooth flow and increased exhaust velocity.
  • Heavy-duty 16-gauge tubing for increased strength and durability.
  • Smooth-transition, 1-7/8” diameter primary tubes offer increased exhaust flow, enhanced performance, and improved throttle response.
  • OE-style 2-1/2” collector connects to factory exhaust head pipe without cutting or welding.
  • TIG-welded, machined 3/8” header flange for a leak-free seal.
  • Three finishes: Natural, Polished, and Silver Ceramic Coated.
  • Premium aluminum header gaskets included.

Flowtech Shorty Headers for 11-14 Mustang 3.7L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.