Tag: chevy

Centerforce (04614877): DYAD DS Twin Disc for 2016 Chevy Camaro 6.2L LT1

David Ayers Leave a comment
Use This Post Clip for Email

The pressure plate on the new DYAD DS Twin Disc for 2016 Chevrolet Camaro 6.2L LT1 8-cylinder engine from Centerforce features two of the company’s patented technologies: the Centrifugal Weight System for superior clamp load over stock, and the ball-bearing pressure plate, which provides light pedal effort. The discs are augmented with segmented “puc”-style facings on both sides—providing increased holding capacity and longevity. Includes a lightened billet steel flywheel for extra RPM.

Features

  • Patented ball-bearing pressure plate and Centrifugal Weight System.
  • Lightened billet-steel flywheel.
  • 16 lb. lighter than OE.
  • ARP fasteners.
  • Easy setup—no adjustment required!
Centerforce (04614877): DYAD DS Twin Disc for 2016 Chevy Camaro 6.2L LT1
Centerforce (04614877): DYAD DS Twin Disc for 2016 Chevy Camaro 6.2L LT1

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual

David Ayers Leave a comment
Use This Post Clip for Email

Hurst’s new version of their popular Billet Plus shifter for the 2016 Chevy Camaro SS with 6-speed manual transmission (3916131) has all of the same performance benefits of the classic version—including a 40-percent reduction in shifter throw—but additionally features a black pistol grip–style handle similar to the Nitro Stick. This change adds a modern design element to these classically imagined cars.

Features

  • Reduces shift throw by 40%.
  • Machined billet aluminum construction.
  • Modern pistol grip design.
  • Black anodized finish.
Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual
Hurst (3916131): Billet Plus Shifter for 2016 Chevy Camaro SS with 6S Manual

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Auto Meter: Direct-Fit American Muscle Dash Kits

David Ayers Leave a comment
Use This Post Clip for Email

Upgrade your classic 60s, 70s, or early-80s muscle car or truck with an Auto Meter Direct-Fit American Muscle Dash Kit. Each easy-to-install kit includes a durable replacement dash panel, six iconic American Muscle gauges, a universal wiring harness, sending units, LED lighting dimmer, and all necessary mounting hardware. LED through-dial lighting ensures optimal visibility during low-light conditions while Auto Meter‘s easy, no-fab installation allows you to preserve the original interior of your classic ride.

More than a dozen models are available, including those for Camaro, Firebird, Nova, Chevelle, El Camino, Monte Carlo, Malibu, Challenger, Suburban, GM E-body and A-body, and more!

Features

 Simplicity: Takes the guesswork out of deciding what gauges to use—included pieces satisfy functionality and nostalgia.

  • Clean installation: Uses factory mounting locations and hardware—no cutting, drilling, or dash modification required.
  • Precision-molded, durable, and UV-protected ABS plastic replacement dash panel.
  • Six all-electric American Muscle gauges: tachometer, speedometer, water temperature, oil pressure, voltmeter, and OE-specific fuel level.
  • Universal 6-gauge wiring harness.
  • All necessary sending units and mounting hardware.
  • LED dimmer and installation instructions.
  • Made in the USA!
Husky Liners: KickBack Mud Flaps for Lifted Trucks
Husky Liners: KickBack Mud Flaps for Lifted Trucks

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Based on the platform-designed Blackheart line—engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality—is Hooker’s new Axle-Back Dual Transverse Dual Mode Exhaust System with Quad Tips for manual 2016 Chevy Camaro SS with 6.2L V8. It offers max dyno gains of +15.88 hp and 17.71 ft.-lb. torque by eliminating the restrictive factory mid-pipe where the exhaust tube is crushed.

70401319-RHKR uses dual polished 304 stainless steel, high-flow, straight-through transverse mufflers and exhaust valves that provide a pleasant driving experience at cruising speeds when closed and an aggressive, race-inspired tone when open. The system uses factory mounting points for ease of installation, while 4” dual-wall, angle-cut, polished stainless steel quad tips with laser-etched Hooker Blackheart logo offer unmatched styling.

Features

  • Fits manual 2016 Chevrolet Camaro SS V8 6.2L
  • Dyno gains of +15.88 hp and 17.7 ft.-lb. torque
  • Mandrel-bent 18-gauge polished stainless steel
  • Dual high-flow, straight-through transverse mufflers
  • 4” dual-wall, angle-cut quad tips
  • Built-in exhaust values emit different tones when open and closed
  • Eliminates restrictive factory mid-pipe
  • Quality welds for strength, longevity, and good looks
  • Uses factory mounting points for ease of installation and ground clearance
  • Backed by Hooker’s lifetime limited warranty
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

The Outlaw Axle-Back Exhaust System provides an aggressive exhaust tone both inside and outside your 2016 Chevrolet Camaro SS coupe or convertible—with all the performance gains you expect from the experts at Flowmaster. This bolt-on, emissions-legal system for the 6.2L V8 features a pair of 409S stainless steel Outlaw Series mufflers with 3” stainless steel mandrel-bent pipes.

The 817745 sports benefits such as improved throttle response, mileage, and power. Finished off by 4” polished-black, PVD-coated stainless steel tips, this Chevy exhaust system is manufactured in the USA, is covered by Flowmaster’s Lifetime Limited Warranty, and includes all the parts and hardware required for installation.

Note: Automatic transmission models include active exhaust valves that operate while in MDS mode. These valves are retained with this system. Does not fit models with the Performance Exhaust Option

  • Fits 2016 Chevrolet Camaro SS couple or convertible models.
  • Bolt-on installation.
  • Emissions legal.
  • Dyno-tuned, race-proven technology.
  • Produces a very aggressive interior and exterior tone.
  • 3” mandrel-bent stainless steel pipes and 4” black tips.
  • Made in America and backed by Flowmaster’s Limited Lifetime Warranty.
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).

Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.

  • Fits ’14–’15 C7 Corvette.
  • 3” 18-gauge stainless steel construction.
  • 4” twin-wall polished tips.
  • Straight-through, high-flow performance.
  • 3” bypass valve utilizes factory NPP actuator.
  • Retains all factory catalytic converters (cutting required).
  • Siamese X-pipe for increased scavenging.
  • Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock: E-Force Supercharger System for 2016 Camaro SS

David Ayers Leave a comment
Use This Post Clip for Email

The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torque at the real wheels. That’s an extra 140 horsepower and 124 foot-pounds of torque!

These E-Force Superchargers are designed to work with all OEM emissions equipment, which will make them 50-state emissions legal (EO number pending). Combined with great looks (black powder-coated supercharger assembly and bright-red coil covers) and an incredible 3-year/36,000-mile warranty, that makes these systems a great choice for your daily driver.

Enthusiasts will appreciate the Eaton 2300 TVS rotor assembly, air-to-water twin intercooler system, and dual pass heat exchanger. Edelbrock has fine-tuned the performance via a unique runner design and an integrated bypass value, which help reduce parasitic loss under light throttle—thus improving potential fuel efficiency. And it all goes under the hood without any modification!

  • Stage 1 Street systems for manual (1559) and automatic (1558) ’16 SS Camaros.
  • Designed to work with OEM emissions equipment (EO number pending).
  • Black powder-coated supercharger assembly.
  • Bright red coil covers.
  • Eaton 2300 TVS rotor assembly.
  • No under-hood modification.
  • 3-year/36,000-mile warranty.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Edelbrock: E-Force Supercharger System for 2016 Camaro SS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT (60692): OEM-Compatible Gooseneck Ball and Safety Chain Anchor Kit for GM

David Ayers Leave a comment
Use This Post Clip for Email

Outfitting your GM truck to tow a heavy-duty flatbed or livestock trailer is easy with CURT’s OEM-compatible Gooseneck Ball and Safety Chain Anchor Kit, which fits GM-specific gooseneck ball #16629. This ball was engineered for the GM puck system and provides a 2-5/16″ diameter to fit most standard gooseneck trailers. The simple 1/4-turn latch lock system offers ease of use and a secure mount, supporting a gross trailer weight of 30,000 lb. and a vertical load limit of 7,500 lb.

The included gooseneck safety chain anchors, made from powder-coated, heavy-duty forged steel, provide a reliable connection for your gooseneck trailer. Offering large safety chain loops to accept heavy-duty clevis hooks, the anchors go in easy without tools thanks to a simple drop-in installation system.

The 60692 GM kit includes a tough rubber hole cover to keep water, dirt, grime, and rust out of your gooseneck ball hole and a durable plastic storage case.

  • 30,000 lb. GTW / 7,500 lb. vertical load limit.
  • Fits Chevy/GMC pickups with factory tow package only.
  • Chrome-plated 2-5/16” ball fits all standard gooseneck trailers.
  • Installs easily with one-quarter turn latch-locking system.
  • Heavy-duty forged anchors with large chain hook openings.
  • Drop-in anchors mean no special installation tools.
  • Corrosion-resistant rubber cover for trailer ball hole.
  • Heavy-duty plastic storage case included.
  • Requires factory puck system.
CURT (60692): OEM-Compatible Gooseneck Ball and Safety Chain Anchor Kit for GM
CURT (60692): OEM-Compatible Gooseneck Ball and Safety Chain Anchor Kit for GM

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.