Tag: chevy

Holley (223-02): iNTECH Cold Air Intake for ’10-’15 Camaro 6.2L V8

David Ayers Leave a comment
Use This Post Clip for Email

Shipping July 7, the patent-pending 223-02 iNTECH cold air intake from Holley represents the highest level of technology, style, and performance for your 2010–2015 Chevy Camaro (5th generation) 6.2L V8. Dyno tests saw increases of 19.04 HP and 16.55 ft. lb. of torque with a broad power curve.  iNTECH sealed intakes feature a unique Slip-Seal housing–filter tube interface that eliminates the use of clamps and adapters to achieve a seamless installation, while the four-layer dry air filter eliminates the use of oils that can damage MAF sensors and trigger check engine lights.

Holley designed the housing to match your Camaro’s engine compartment, including retaining factory mounting locations to enable a simple installation.

Features

  • For 2010–2015 Chevy Camaro 6.2L V8.
  • +19.04 horsepower and +16.55 foot-pounds’ torque in dyno tests.
  • Slip-Seal interface eliminates the use of hose clamps and adapters.
  • One-piece, fully sealed intake housing design guarantees a true fresh-air intake charge.
  • Factory mounting locations allow for a simple, secure installation.
  • High-flow, washable, reusable 4-layer dry performance air filter.
  • Inner and outer aluminum mesh air filter media prevents filter deformation and rust.
  • Bellows-style silicone coupler at throttle body accommodates nitrous plates or throttle body spacers without cutting the tube.
  • Enhances the look of your engine bay with a stealthy appearance.
  • Stainless steel T-bolt clamps for maximum clamping force and durability.

Holley iNTECH Cold Air Intake for Camaro 223-02

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2016 Performance Corner™ Vendor Showcase presents: WARN

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Performance Corner™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Corby Phillips talks about what’s new for 2016.

Want to know more about WARN? Click here:
https://www.performancecorner.com/manufacturer/warn

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology: Fabricated Aluminum Valve Covers

David Ayers Leave a comment
Use This Post Clip for Email

Available for popular Small Block or Big Block Chevy, Ford, and Mopar engines, the new race-inspired fabricated aluminum valve covers from Quick Fuel Technology are available with or without 1.25” breather openings for use with vacuum pumps or dry sump engines. These lightweight, durable valve covers are made from TIG-welded 6061 T5 sheet aluminum, with a 1/4” mounting flange, laser-etched QFT logo, and heights that clear most popular rocker arm applications. Mounting hardware included; sold in pairs.

Two finishes available: Silver Anodized or Black Coated.

Features

  • Available for popular Small Block or Big Block Chevy, Ford, and Mopar
  • 100% TIG-welded 6061 T5 aluminum.
  • 1/4” one-piece billet aluminum mounting flange.
  • Available with or without 1.25” breather openings.
  • Clear many rocker arm combinations.
  • Race-inspired, laser-etched QFT
  • Includes mounting hardware for both valve covers.
  • Sold as a pair.

Quick Fuel Technology Fabricated Aluminum Valve Covers

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Belltech (999SP): Lowering Kit for ’15-’16 Chevrolet Colorado/Canyon Ext/Crew Cab Short Bed 2WD

David Ayers Leave a comment
Use This Post Clip for Email

Designed to lower your truck +1” to -3” in the front and 4” in the rear, this all-new lowering kit with street-performance shocks from Belltech is just what you need to give your 2015–2016 Chevy Colorado or Canyon a low, aggressive stance. With all components required to properly lower your vehicle (including flip kit), this Stage 3 kit fits 2WD Extended/Crew Cab short bed Canyon/Colorado of the specified years.

Features

  • Fits 2015–2016 Chevrolet Colorado/Canyon (Ext/Crew Cab short bed 2WD).
  • Stage 3 complete solution.
  • +1” to -3” F / 4” R.
  • Street-performance shocks.

Belltech Lowering Kit for Colorado and Canyon

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Iron Cross: Low-Profile Bumpers

David Ayers Leave a comment
Use This Post Clip for Email

Compatible with a variety of center-mount light options (sold separately), the low-profile bumper from Iron Cross is a bright pick to toughen up the front of your pickup, featuring 10-gauge steel and 0.25” mounting brackets.

These low-profile bumpers showcase Iron Cross’s iconic branding, with D-lugs for Iron Cross shackles and 6” rectangular fog light cutouts on either side. The center cutout can accept one 20–22” light bar, two 6” center light mounts, or three 6” center light mounts.

Current applications include various years of Sierra 1500, Silverado/Sierra 2500/3500, Colorado Crew Cab, Ram 2500/3500, and F-250/-350/-550.

Features

  • Distinctive Iron Cross
  • OE look with a heavy-duty profile.
  • 10-gauge steel (3/4” mounting brackets).
  • D-lugs for cross shackles.
  • 6” fog light cutouts (rectangles).
  • Versatile center light mount (no light-insert plate).
  • Iron Cross light kits available (and sold separately).

Iron Cross Low-Profile Bumper

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edge Products (26040): EvoHT2 for GM Gas/Diesel

David Ayers Leave a comment
Use This Post Clip for Email

The EvoHT2 from Edge Products is a premium handheld performance tuner that gives your GM gas or diesel vehicle the most power at the best price—with the industry-leading service and quality that you’ve come to expect from Edge Products.

The 26040 features a color screen, upgraded processor, and numerous new features, literally putting the power to unlock the hidden potential of your GM truck’s or SUV’s engine and fuel economy in the palm of your hand.

Features

  • Performance programmer for GM gas and diesel trucks/SUVs.
  • Handheld device with color screen and upgraded processor.
  • Not available for sale or use on pollution-controlled vehicles.

Edge Products EvoHT2 for GM 26040

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES: Rocker Steps Aren’t Just for Jeep Wrangler Anymore

David Ayers Leave a comment
Use This Post Clip for Email

ARIES Automotive rocker steps offer more than just extra side protection. With their wide, flat profile and heavy-duty design, they offer a solid step-up option for the off-roader inside every truck owner.

While previously available only for the Jeep Wrangler JK, ARIES rocker steps are now available for today’s most popular trucks and SUVs!

With welded-on brackets for high-and-tight fitment and a rugged textured-black powdercoat, ARIES rocker steps provide plenty of ground clearance and solid protection from the scuffs, dings, and dents that can happen anywhere, from parking lots to mountain terrain. High-strength steel provides reliable strength, and the unique double-tube design offers a solid 3” step-up surface.

Features

  • Double-tube layout and 3” wide top plate.
  • Heavy-duty design for extra side protection.
  • Flat profile increases ground clearance.
  • Textured-black powdercoat easily hides minor scratches and grime.
  • High-strength, all-steel construction—no plastic parts.
  • Prewelded mounting brackets for increased rigidity and simpler installation.
  • No-drill, vehicle-specific application for a custom fit.
  • 3-year warranty.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARP (234-4344): ARP2000 Head Stud Kit for Chevrolet LS (2003 & Earlier)

David Ayers Leave a comment
Use This Post Clip for Email

Pro Series ARP2000 head studs for Chevy LS (2003 and earlier) from ARP, centerless ground and heat treated before thread rolling, are designed to maximize reliability and strength, with nominally rated 220K psi tensile strength.

The 234-4344 kit includes a set of twenty M11 head studs, ten M8 studs, thirty parallel-ground washers, thirty 8740 chrome-moly 12-point nuts, and ARP’s own Ultra-Torque fastener assembly lubricant.

Features

  • For 2003-and-earlier Chevy LS engines.
  • Built for strength and longevity.
  • Centerless ground and heat treated.
  • 220,000 psi tensile strength rating.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance (85555): V8 Pro-Billet Distributor for Chevy (Black)

David Ayers Leave a comment
Use This Post Clip for Email

The most popular performance distributor in the MSD Performance lineup is now available in black! The 85555 V8 Pro-Billet Distributor for Chevy, which must be used with an MSD 6-, 7-, or 8-series ignition, features housing that is CNC machined from a billet of 6060-T6 aluminum to achieve exact tolerances. It also features a high-output magnetic pick-up—the most accurate way to trigger your ignition. With no moving parts to wear or adjust, the pick-up is maintenance free!

Note: No CARB exemption order number is available for this product. Will not accept a vacuum advance canister. Must be used with an MSD ignition control.

Features

  • CNC-machined billet-aluminum housing and billet-aluminum base.
  • Supplied with an HEI-style distributor cap and rotor (accepts Cap-A-Dapts).
  • O-ring seals can be added to modified blocks to improve oil pressure control.
  • Special oil tract improves lubrication to the distributor and cam gear.
  • Nylon pads ensure smooth operation of the advance weights.
  • Advance weight pins are staked and TIG welded to the plate.
  • Mechanical advance assembly can be locked out for crank trigger systems.
  • Advance plate/weights are fine blanked from chrome-moly steel and QPQ coated.
  • 500” polished steel shaft guided by sealed ball bearing and extra-long sintered bushing.
  • Maintenance-free magnetic pickup and precision reluctor.
  • Easy-to-adjust mechanical advance with supplied springs and stop bushings.

MSD Performance (85555): V8 Pro-Billet Distributor for Chevy (Black)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive (56-13725): HDX Drop Step for ’16 Silverado/Sierra 1500

David Ayers Leave a comment
Use This Post Clip for Email

The new 56-13725 HDX Drop Step from Westin Automotive gives 2016 Chevy and GM 1500 owners the rugged look and functionality they crave. This product features solid one-piece steel construction and heavy-duty punch plates, which enhance traction for safer entry and exit.

Westin’s HDX Drop Steps also feature a notched bar design that allows for more than 2” of additional toe/heel placement over the competition. Available in a textured black finish that complements Westin Automotive HDX Bumpers, these drop steps are specifically designed to fit 2016 Silverado and Sierra 1500 pickups and include installation hardware and instructions.

Features

  • Die-stamped, slip-resistant, extra-wide step areas.
  • Fits tight to rocker panel.
  • Chiseled style complements HDX Bumpers.
  • Patented, bolt-on design.
  • Backed by a 3-year warranty.
Westin Automotive (56-13725): HDX Drop Step for ’16 Silverado/Sierra 1500
Westin Automotive (56-13725): HDX Drop Step for ’16 Silverado/Sierra 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.