Tag: chevrolet

Hypertech (730129): In-Line Speedometer Calibrator Module for 2019 GM 1500

John Arnaud Leave a comment
Use This Post Clip for Email

Perfect for GM 1500 trucks with computers that don’t allow for tire size correction (or that have tire sizes outside the range of programmers), the 730129 In-Line Speedometer Calibrator from Hypertech is the best way to recalibrate your speedometer and odometer for larger-than-stock tires. This product has no limit for increasing tire height, while it has a lower limit of 50% of your 1500’s stock tire size. Hypertech designed the In-Line Speedometer Calibrator for an easy plug-and-play installation into the factory wiring harness—no splicing required!

Note: Not legal for sale or use in California.

Features

  • For 2019 GMC Sierra 1500 and Chevy Silverado 1500.
  • Speedometer/odometer correction for tire sizes (no upper limit; lower limit 50% of stock tire size).
  • Speedometer/odometer correction for gears (all valid gear ratios supported).
  • Plug-and-play installation; no splicing required.
Hypertech In-Line Speedometer Calibrator Module for 2019 GM 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT (69-3535): 3.5” SST Lift Kit for ’15-’19 GM Colorado and Canyon

John Arnaud Leave a comment
Use This Post Clip for Email

The new SST lift kit for 2015–2019 GM Colorado/Canyon from ReadyLIFT provides 3.5” of front lift and 1” of rear lift along with a nice level stance. The made-in-the-USA 69-3535 kit allows for up to a 285/70-17 tire. This no-cut ReadyLIFT kit includes new tubular steel upper control arms with adjusted ball joint pivot angles and will not compromise suspension or drivetrain geometry.

Features

  • For 2015–2019 GMC Canyon and Chevy Colorado.
  • Mild lift solution provides a great-looking, aggressive stance with a slight rake.
  • No-cut kit maintains the factory ride, handling, and suspension geometry.
  • Allows for up to a 32.5” x 11.50” tire on up to +18 offset wheels. (285/70-17).
  • Unmatched curb appeal and rugged mid-size truck capability.
  • CNC-machined, aircraft-grade, billet-aluminum front top hat replacement lift spacers.
  • Heavy-duty OEM-style cast iron rear blocks.
  • Tubular steel upper control arms with adjusted ball joint pivot angles.
  • Made in the USA.
ReadyLIFT 3.5 Inch SST Lift Kit for 15-19 GM Canyon Colorado 69-3535

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Belltech (1011SP): Lowering Kit with Street Performance Shocks for ’16.5-’18 GM Trucks

John Arnaud Leave a comment
Use This Post Clip for Email

The1011SP Belltech lowering kit helps you lower your 2016.5–2018 Silverado or Sierra (all cabs, 2WD, 2F/4R) right the first time, as it includes all the parts and pieces you need to get the look, alignment, performance, and safety you’re looking for. This all-in-one solution includes Street Performance shocks.

Note: Must have alumi/stanped control.

Features

  • For 2016.5–2018 Chevy Silverado and GMC Sierra (all cabs, 2WD, 2F/4R).
  • Complete kit includes Street Performance shocks.
  • Lower your truck correctly the first time with the right look, alignment, performance, and safety.
Belltech Lowering Kit with Street Performance Shocks for Sierra Silverado 1011SP

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Daystar (KG09140BK): Comfort Ride Leveling Kit for GM Trucks and SUVs

John Arnaud Leave a comment
Use This Post Clip for Email

The KG09140BK Daystar Comfort Ride leveling kit uses heavy-duty, progressive-rate polyurethane spacers to bring the front of your vehicle level with the rear—all while retaining the stock factory ride quality you love. The setup avoids any metal-on-metal contact, corrosion, or squeaks and is made in the USA to Daystar’s exacting standards.

For GM 2007–2018 1500 Series trucks, 2007–2017 SUVs, and 2007–2013 Chevy Avalanche.

Features

  • For GM 2007–2018 1500, 2007–2017 SUVs, and 2007–2013 Chevy Avalanche.
  • Levels the stance of your vehicle.
  • Engineered for Milestar Patagonia A/T 31” tires.
  • Maintains factory ride quality.
  • No metal-on-metal contact, corrosion, or squeaks.
  • Made in the USA.

Daystar Comfort Ride Leveling Kit for 07-18 GM 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

SuperSprings (SSA13): SuperSprings for GM 2500/3500 and Ford F-250/-350

John Arnaud Leave a comment
Use This Post Clip for Email

SuperSprings’ namesake product is a unique, patented, self-adjusting suspension stabilizing system for vehicles with rear leaf springs that levels loads and reduces body roll. The SSA13 kit, designed to fit Chevrolet/GMC Sierra/Silverado 2500/3500, Express/Savana 3500, and Ford F-250 and F-350 vehicles, provides extra load support and reduces body roll up to 30% without compromising ride quality. This maintenance-free system works with OE leaf spring assemblies. Sold in a left and right pair.

Features

  • For Sierra/Silverado 2500/3500, Express/Savana 3500, and Ford F-250/F-350.
  • Maintenance-free, self-adjusting suspension stabilizing system.
  • High-grade SAE 5160H steel is shot peened to relieve spring stress and extend life.
  • 3,000 lb. additional load-leveling ability.
  • Reduces body roll up to 30% without compromising ride quality.
  • Adjustable shackles allow installation to suit various needs.
  • Works with original-equipment leaf spring assembly.
  • Sold as a pair (left and right).
  • Installation: < 1 hour (typical).

SuperSprings for GM 2500 3500 Ford F-250 F-350

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT (66-3920): 2” Leveling Kit for 2019 GM 1500 Trucks

John Arnaud Leave a comment
Use This Post Clip for Email

2019 Chevy Silverado and GMC Sierra are getting their 2” rise thanks to ReadyLIFT’s new 66-3920 leveling kit. Made from CNC-machined 6060-T6 aircraft-grade aluminum, this kit features a 5-degree taper for proper strut alignment and an easier installation. It will provide the proper amount of front lift to produce a level stance.

Note: Kit allows for up to a 285/65-20 tire on a 20×9 0 offset wheel OR a 33/11.5 tire on up to a -12 offset wheel.

Features

  • For GM 1500 trucks (2WD & 4WD).
  • Provides up to 2” lift and a level stance.
  • CNC-machined, aircraft-grade, 6060-T6 aluminum.
  • 5-degree taper included for proper strut alignment.
  • Installs in minutes with basic tools.

ReadyLIFT 2 Inch Leveling Kit for 2019 GM 1500 66-3920

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES (2808509): StyleGuard XD Floor Liners for 2018 Jeep Wrangler JL

John Arnaud Leave a comment
Use This Post Clip for Email

StyleGuard XD floor liners from ARIES aren’t your run-of-the-mill mats. Laser-measured and boasting a multifunctional three-layer construction, these tough-but-sleek StyleGuard XD floor liners give your Jeep Wrangler JL the first-rate interior protection it deserves.

The first layer—the base layer—is covered with OmniGrip fibers: wire-like threads that lock the liners in place on virtually any kind of carpet. Unlike plastic “nubs,” these bristles offer literally thousands of anchor points to prevent sliding around.

The second is a generous layer of cross-linked polyethylene foam that provides a comfortable stepping surface, absorbs and reduces engine and road noise, and provides two-way temperature insulation.

The third and top layer is composed of thermoplastic rubber (TPR), which is wear resistant and waterproof. It resists the wear of foot traffic, provides welcome traction, and delivers elevated interior style. Also at the top level are raised edges and smartly engineered channels that contain spills and debris.

To install ARIES StyleGuard XD floor liners, just drop them in: they are designed to conform to the shape of your floor. Plus, when it’s time to clean, just hose them off and let them air dry. 2808509 is a complete kit that includes front and rear liners. Other applications available.

Features

  • Durable three-layer construction for ultimate interior protection.
  • Thousands of patented OmniGrip fibers prevent movement on carpet.
  • Channeled surface and raised edges contain liquids and debris.
  • Cross-linked polyethylene foam adds comfort and helps limit road noise.
  • Laser-measured design for perfect, vehicle-specific contour.
  • Flexible, waterproof TPR top layer will not become brittle over time.
  • Lightweight construction for simple, drop-in installation and easy removal.
  • Fire-retardant according to FMVSS 302 testing.
  • Offered in complete kits or individually for the first or second row.
  • Warranty: limited lifetime.

ARIES StyleGuard XD Floor Liners for Colorado and Canyon

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT: Big Lift Kits with Bilstein 5100 Shocks for ’11-’18 GM HD

John Arnaud Leave a comment
Use This Post Clip for Email

ReadyLIFT has extended its lineup of popular and proven 5–6” and 7–8” Big Lift kits to include 2011–2018 Chevy Silverado and GMC Sierra 2500/3500HD trucks. These kits include four of the company’s premium Bilstein 5100 Series shocks, which are dialed in for the proper valving for larger wheels and tires while providing the required length for each lifted application. GM HD customers have been asking for these shocks to be included with their lift kits, and ReadyLIFT has answered the call.

These HD lift systems feature precision-designed, laser-cut, and CNC-formed subframe assemblies that directly bolt in; custom-formed nodular iron knuckles engineered to provide perfect geometry for superior ride and handling performance; and an integrated differential drop bracket system to ensure correct CV axle angles on 4WD applications and maximum performance in 4WD mode.

ReadyLIFT’s forged torsion keys provide 5–6” (kit #44-3052) or 7–8” (kit #44-3072) of adjustable front lift, all while delivering an exceptional factory ride and handling. The complete 44-3072 kit also includes tubular upper control arms.

Features

  • For 2011–2018 GM 2500/3500HD 2WD or 4WD pickups.
  • Kits provide 5–7” or 7–8” lift.
  • Include premium ReadyLIFT Bilstein 5100 Series shocks.
  • Enjoy rugged off-road strength and a good factory ride on the street.
  • Ideal wheel/tire combo: 37” x 12.50” for no rub on a 9” wide wheel with -6 offset.

ReadyLIFT Big Lift Kits with Bilstein 5100 Shocks for GM 2500 3500 HD

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock Pro-Flo XT Manifolds for Chevy 71403

Edelbrock: Pro-Flo XT Manifolds for Chevy

John Arnaud Leave a comment
Use This Post Clip for Email

Available for LS1 (7139 – Satin; 71393 – Black), LS2 (7140 – Satin; 71403 – Black), and LS3 (7142 – Black), the new Pro-Flo XT intake manifolds from Edelbrock are engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1,500–7,000 RPM). Fuel rail kits (3629 – LS; 3648 – LS3) sold separately.

Features

  • For Chevy LS1, LS2, and LS3 applications.
  • Large plenum and tapered runners deliver maximum HP and broad torque.
  • Fuel rail kits available (and sold separately).

Edelbrock Pro-Flo XT Manifolds for Chevy 71403

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hurst (3912004): Blackjack Manual Shifter for 1976 Camaro with Tremec TKO 500/600 Transmission

John Arnaud Leave a comment
Use This Post Clip for Email

The 3912004 Blackjack shifter from Hurst is designed to locate the shifter handle in the proper location for all 1967 Chevrolet Camaro applications with Tremec TKO five-speed transmissions. With a CNC-machined billet 6061 aluminum housing and a tough black mil-spec anodized finish, the Blackjack is the highest-quality shifter you can get for your Tremec TKO transmission.

Other features include a zinc-plated hardened-chromoly steel stick adapter, dual stick centering springs, hardened chromoly pivot pins, and a durable Delrin pivot ball for positive, quiet operation. Includes the classic Hurst chrome flat bar stick and white shift ball.

Features

  • CNC-machined billet 6061 aluminum housing.
  • Durable Delrin pivot ball for smooth operation.
  • Hardened chromoly pivot stick.
  • Classic Hurst chrome stick with white shift ball.

Hurst Blackjack Shifter for 1976 Camaro

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.