Tag: chevrolet

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).

Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.

  • Fits ’14–’15 C7 Corvette.
  • 3” 18-gauge stainless steel construction.
  • 4” twin-wall polished tips.
  • Straight-through, high-flow performance.
  • 3” bypass valve utilizes factory NPP actuator.
  • Retains all factory catalytic converters (cutting required).
  • Siamese X-pipe for increased scavenging.
  • Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock: E-Force Supercharger System for 2016 Camaro SS

John Arnaud Leave a comment
Use This Post Clip for Email

The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torque at the real wheels. That’s an extra 140 horsepower and 124 foot-pounds of torque!

These E-Force Superchargers are designed to work with all OEM emissions equipment, which will make them 50-state emissions legal (EO number pending). Combined with great looks (black powder-coated supercharger assembly and bright-red coil covers) and an incredible 3-year/36,000-mile warranty, that makes these systems a great choice for your daily driver.

Enthusiasts will appreciate the Eaton 2300 TVS rotor assembly, air-to-water twin intercooler system, and dual pass heat exchanger. Edelbrock has fine-tuned the performance via a unique runner design and an integrated bypass value, which help reduce parasitic loss under light throttle—thus improving potential fuel efficiency. And it all goes under the hood without any modification!

  • Stage 1 Street systems for manual (1559) and automatic (1558) ’16 SS Camaros.
  • Designed to work with OEM emissions equipment (EO number pending).
  • Black powder-coated supercharger assembly.
  • Bright red coil covers.
  • Eaton 2300 TVS rotor assembly.
  • No under-hood modification.
  • 3-year/36,000-mile warranty.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Edelbrock: E-Force Supercharger System for 2016 Camaro SS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

AVS: Aeroskin II Textured Matte Black Hood Shield

John Arnaud Leave a comment
Use This Post Clip for Email

AVS has released an all-new lineup of hood shields for a variety of vehicles. The Aeroskin II is the latest product that keeps AVS “Ahead of the Curve.” The Aeroskin II is designed to flow with the contours of your vehicle’s hood, providing the ultimate protection from road hazards. Custom-molded and made in the USA, AVS’s Aeroskin II is precision engineered to perfectly fit your vehicle’s hood.

Features:

  • Custom style that protects your vehicle’s hood
  • Made from a impact-resistant TPO material
  • Installs without drilling using 3M automotive-grade adhesive
  • OEM matte black textured finish
  • Backed by a limited lifetime warranty
  • Made in the USA
  • Available for Ford, Chevrolet, GMC, Dodge, and Toyota

    AVS Aeroskin II 436011
    AVS Aeroskin II 436011

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Putco: GM Officially Licensed Bowtie Grilles

John Arnaud Leave a comment
Use This Post Clip for Email

2014-2015 Chevrolet Silverado LD Bowtie Grille Features:

  • 14-gauge polished 304 stainless steel
  • GM licensed
  • No drilling
  • No cutting
  • Replaces existing OEM grille

    PUTCO 84198GM
    PUTCO 84198GM

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hedman (68670): Full Length Standard Duty Uncoated Headers for 1967-81 Chevy Camaro

John Arnaud Leave a comment
Use This Post Clip for Email

Hedman’s standard-duty, uncoated* headers for the 1967-1981 Chevrolet Camaro are manufactured using 18-gauge, mandrel-bent primary tubes and 1/4″ flanges. They feature 1-5/8″ primary tubes with a 3″ ball and socket-style collector. This set of headers has been designed specifically for use on vehicles with a “close ratio” steering box.

All Hedman street headers are MADE IN THE USA and are backed by a lifetime warranty against manufacturing defects!

*The factory black paint applied to uncoated headers is not high-temp, and is for pre-installation protection only.

Hedman 68670
Hedman 68670

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD: 2950 Atomic LS EFI Kit

John Arnaud Leave a comment
Use This Post Clip for Email

MSD has made Atomic EFI the simple solution for your LS EFI needs. Start your installation by knowing that you’re getting everything you need for your crate engine. These kits are each designed for a specific engine and are supplied with Rail Assemblies, Handheld Controller, Power Module and Harness, Wide-Band 02 Sensor and Bung, -6 fittings for the fuel rails, and cross-over hose.

MSD 2950
MSD 2950

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edge Products’ Evolution CS/CTS Get Welcome Feature Update for Chevy/GMC Gas Vehicles

John Arnaud Leave a comment
Use This Post Clip for Email

For Evolution CS and CTS users who have been asking for an option to disable their units’ Active Fuel Management/Displacement on Demand (AFM/DOD) feature, your time has come.

Edge Products 85101
Edge Products 85101

AFM/DOD, which appears on Evolution models PN 85150 and PN 85250 (covers 2007–2013 5.3L and 6.2L Chevy/GMC trucks and SUVs as well as 6.0L 2007–2010 1500 Chevy/GMC trucks) has been known to cause shuddering, dropped cylinders, and excessive oil consumption.

Reacting to these issues, Edge Products has released a fix that allows you to toggle off AFM/DOD directly from the Evolution screen. Users simply go online to download the quick, easy, and free patch.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.