Tag: CAT-BACK

Flowmaster (817845): Cat-Back 409S Outlaw Exhaust Kit for ’17-’18 Dodge Charger R/T and Daytona with 5.7L Engine

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re looking for aggressive exterior and interior sound for your 2017–2018 Dodge Charger R/T or Daytona with 5.7L engine, the Outlaw cat-back exhaust system is your pick. Perfect for drivers unafraid of the extra attention this system is sure to draw, the Flowmaster 817845 kit features 3” 409 stainless steel, mandrel-bent tubing; a pair of race-inspired Outlaw Series mufflers; and a 3” Scavenger Series X-pipe for maximum performance. The tailpipes include active exhaust valves and are finished with 4” stainless steel tips that exit the factory exhaust cutouts.

Designed for an easy fit, this Flowmaster system includes all necessary parts, hardware, and installation instructions. Manufactured in the USA.

Features

  • For 2017–2018 Dodge Charger R/T and Daytona with 5.7L engine and standard bumper cutout.
  • Dyno-tuned for maximum performance.
  • 409 stainless steel construction.
  • Easy installation.
  • Made in the USA.
  • Warranty: limited lifetime.

Flowmaster Cat Back 409S Exhaust Kit for Charger RT and Daytona 817845

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817760): Outlaw Cat-Back Exhaust System with Moderate/Aggressive Sound

John Arnaud Leave a comment
Use This Post Clip for Email

Designed for Dodge applications with the factory Active Exhaust option, the 817760 Outlaw cat-back exhaust system from Flowmaster provides an aggressive, wide-open exterior sound level when hard on the gas and a moderate exterior/interior sound while cruising. This bolt-on 409S stainless steel system features a dual 3.00” Scavenger X-pipe assembly that runs into a pair of specially built Super 40 Series mufflers, uses 3.00” mandrel-bent tailpipes with built-in active exhaust valves, and is finished off with 3.50” quad stainless steel embossed tips. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Made in the USA!

Fits: 2015–2017 Dodge Challenger SRT 392 and R/T Scat Pack with 6.4L engine and SRT Hellcat with 6.2L engine.

Features

  • For factory Active Exhaust option.
  • Dyno-tuned for maximum performance.
  • Stainless steel construction.
  • Made in America.

Flowmaster Outlaw Cat Back Exhaust 817760

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS

John Arnaud Leave a comment
Use This Post Clip for Email

The Outlaw Axle-Back Exhaust System provides an aggressive exhaust tone both inside and outside your 2016 Chevrolet Camaro SS coupe or convertible—with all the performance gains you expect from the experts at Flowmaster. This bolt-on, emissions-legal system for the 6.2L V8 features a pair of 409S stainless steel Outlaw Series mufflers with 3” stainless steel mandrel-bent pipes.

The 817745 sports benefits such as improved throttle response, mileage, and power. Finished off by 4” polished-black, PVD-coated stainless steel tips, this Chevy exhaust system is manufactured in the USA, is covered by Flowmaster’s Lifetime Limited Warranty, and includes all the parts and hardware required for installation.

Note: Automatic transmission models include active exhaust valves that operate while in MDS mode. These valves are retained with this system. Does not fit models with the Performance Exhaust Option

  • Fits 2016 Chevrolet Camaro SS couple or convertible models.
  • Bolt-on installation.
  • Emissions legal.
  • Dyno-tuned, race-proven technology.
  • Produces a very aggressive interior and exterior tone.
  • 3” mandrel-bent stainless steel pipes and 4” black tips.
  • Made in America and backed by Flowmaster’s Limited Lifetime Warranty.
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).

Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.

  • Fits ’14–’15 C7 Corvette.
  • 3” 18-gauge stainless steel construction.
  • 4” twin-wall polished tips.
  • Straight-through, high-flow performance.
  • 3” bypass valve utilizes factory NPP actuator.
  • Retains all factory catalytic converters (cutting required).
  • Siamese X-pipe for increased scavenging.
  • Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

John Arnaud Leave a comment
Use This Post Clip for Email

Flowtech headers offer the perfect combination of quality and value. These shorty headers fit the popular 2010–2014 Chevy Camaro with V8 6.2L engine and are a must if you’re using a cold air intake, cat-back exhaust system, or a tuner. With their silver-metallic ceramic coating, these 16-gauge headers offer increased strength and durability in addition to smooth flow and increased exhaust velocity. CARB E.O. pending!

  • Mandrel-bent tubes let your system breathe for increased power.
  • Smooth transition, 1-3/4” diameter primary tubes.
  • Unique-cast 2-1/2” collector for maximum strength.
  • TIG-welded, machined 3/8” header flange for a strong, leak-free seal.
  • Designed for a hassle-free installation; accommodate all factory OE components.
  • Premium aluminum header gaskets included.
  • Silver metallic ceramic coating.
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hurst (6350010): Elite Series Cat-Back Exhaust System for 2008-2014 Dodge Challenger SRT8

John Arnaud Leave a comment
Use This Post Clip for Email

Hurst’s new Elite Series cat-back exhaust system for the 2008-2014 Dodge Challenger SRT8 with 6.1L or 6.4L V8 is constructed using the highest-quality materials and finest craftsmanship available today. Hurst Elite Series systems feature fully mandrel-bent 304s stainless steel tubing that has been custom-designed and exclusively manufactured by Flowmaster to ensure a precise fit every time! Hurst engineers then added an X-pipe crossover, which provides maximum scavenging, sound, and performance, and paired it with a set of fully polished 304s stainless steel Hurst mufflers. The mufflers use a high-thermal sound-absorption barrier with a large 3″ straight-through performance core that provides a deep, classic tone reminiscent of Hurst’s iconic heritage. The quad 3.5″ mirror-polished stainless steel tips, featuring laser-etched Hurst logos, finish off the system and put the world on notice that you’re serious about performance and style. Every Hurst Elite Series cat-back exhaust system is hand fabricated in the USA and backed by a Lifetime Limited Warranty.

Hurst_6350010
Hurst_6350010

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817741): American Thunder Cat-Back System

John Arnaud Leave a comment
Use This Post Clip for Email

With its classic sound, Flowmaster’s 817741 American Thunder Cat-Back System for the 2015 Dodge Charger SE/SXT and 2015 Chrysler 300S with 3.6L V6 engine features mufflers tuned to deliver more power, torque, throttle response, and mileage. Best of all, these exhaust systems take sedate vehicles and deliver the great performance tone that muscle car fans love. American Thunder is the most authentic Flowmaster muffler sound available.

Flowmaster_817741
Flowmaster_817741

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.