Tag: B&M

B&M (30497): Transmission Adapter Plate – SBC/BBC Engine to BOP TH350/400/700R

John Arnaud Leave a comment
Use This Post Clip for Email

Used to adapt SBC/BBC engines to a Buick, Oldsmobile, Pontiac transmission, this B&M transmission bellhousing adapter plate is laser-cut to exacting tolerances for a precise fit, then powder coated with a premium black finish. Features the iconic B&M logo laser cut into the plate, and includes mounting hardware and installation instructions. Made in the USA.

Note: Does not fit LS or LS-based LT. For Chevy small-block and big-block engines manufactured after 1962.

Features

  • Precise laser-cut fit.
  • Black powder-coated finish.
  • Heavy 10-gauge steel.
  • Laser-cut B&M

B&M Transmission Adapter Plate 30497

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M (81078): Stealth Side Plate with 12V Button for Right-Hand Magnum Grip Shifter

John Arnaud Leave a comment
Use This Post Clip for Email

Designed to fit right-hand Magnum Grip shifters, the 81078 Stealth side plate with 12-volt button from B&M can activate your two-step ignition, trans-brake, or nitrous system. This product boasts a black anodized finish, 6061 aluminum body, and a wire that is completely hidden in a machined channel on the stick.

Features

  • Fits B&M right-hand Magnum Grip shifters.
  • Button activates two-step ignition, trans-brake, or nitrous system.
  • Wire hidden in machined channel.
  • Works with 12V systems.
  • Black anodized finish.

B&M Stealth Side Plate with 12V Button for RH Magnum Grip Shifter 81078

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2016 Performance Corner™ Vendor Showcase presents: B&M, Flowmaster, & Hurst

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2016 Performance Corner™ Vendor Showcase! In this video series, we will take you booth by booth with our manufacturers showing their latest products In this episode, Mike D’Addario goes over several of the new products for B&M, Flowmaster, and Hurst.

Want to know more about B&M? Click here:
http://performancecorner.com/manufacturer/b-m

Want to know more about Flowmaster? Click here:
http://performancecorner.com/manufacturer/flowmaster

Want to know more about Hurst? Click here:
http://performancecorner.com/manufacturer/hurst

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M (80260): Trick Shift Automatic Transmission Fluid

John Arnaud Leave a comment
Use This Post Clip for Email

Originally developed by B&M for racing applications, Trick Shift automatic transmission fluid is now the most popular high-performance fluid on the street too! Not an additive, Trick Shift comprises a scientific blend of foam inhibitors, pressure agents, and shift modifiers that will provide extended transmission life and drastically improve shift feel.

Trick Shift is the easiest way to measurably improve the transmission performance of your vehicle. It works with all automatic transmissions when a firmer shift is desired. Ideal for towing light trucks and RV applications as well (but not recommended for electronic-controlled transmissions).

B&M 80260 contains 1 gallon of Trick Shift fluid.

Features

  • Desirable firmer shift.
  • Ideal for performance street and racing applications.
  • NOT an additive!
B&M (80260): Trick Shift Automatic Transmission Fluid
B&M (80260): Trick Shift Automatic Transmission Fluid

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M (70272): Polished Aluminum SuperCooler Oil Cooler

John Arnaud Leave a comment
Use This Post Clip for Email

B&M SuperCoolers are made from 100% aluminum in a stamped-plate sandwich configuration. This unique design provides for maximized cooling through more efficient heat dissipation, but it also creates a sturdier product.

  • 11″  x  8.5″  x  1.5″
  • 1/2 NPT Inlet/Outlet
  • 25,000 BTU
  • Resists damage
  • Rigid stacked-plate design
  • Small Size and Lightweight

    B&M 70272
    B&M 70272

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M® (77104): StarTek Starter for GM Small Block/Big Block, (153T & 168T Ring Gear, Straight Mount)

John Arnaud Leave a comment
Use This Post Clip for Email

The new B&M StarTek Starter is designed to provide high torque and power in a wide range of demanding applications. With 4.5:1 reduction gears coupled to a high power 300 Amp motor, hard starting becomes a thing of the past. The StarTek uses an ultra high strength pinion gear, billet aluminum mounting flange, sealed ball bearings, and dual winding solenoid to ensure maximum reliability. For special applications, the StarTek can be clocked in three different positions to ensure you have the most clearance possible between your starter and other engine components.

  • 3 Position Indexing for Optimum Position in Tight Clearance Applications
  • 4.5 : 1 Gear Reduction Ratio for Maximum Torque
  • Billet Aluminum Mounting Flange
  • Designed for Higher Compression and Blown Engines
  • Dual Winding Solenoid for Lower Engagement Current Draw
  • High Performance 300Amp Motor
  • Ultra High Strength Pinion Gear

    B&M 77104
    B&M 77104

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M (41297): Cast Aluminum Differential Cover Ford 8.8

John Arnaud Leave a comment
Use This Post Clip for Email

The B&M Cast Aluminum Differential Cover was designed to strengthen the rear end by preventing case distortion, ring gear, and cap bearing deflection. Constructed of A356.0-T6 aluminum, this rugged unit dissipates heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. To increase durability and aesthetics without compromising heat dissipation, the cover has been coated with a U.S. military-grade (MIL-A-8625) black anodized finish. Additional features include an engraved B&M logo, an additional 0.5 quart fluid capacity for better cooling, magnetic drain plug for catching ferrous metal particles, complete hardware, installation instructions, and a 1-year warranty.

B&M_41297
B&M_41297

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M (11306): Black Cast Aluminum Differential Cover for Chrysler 9.25

John Arnaud Leave a comment
Use This Post Clip for Email

B&M’s Cast Aluminum Differential Cover was designed to strengthen the rear end by preventing case distortion, ring gear, and cap bearing deflection. Constructed of A356.0-T6 aluminum, this rugged unit dissipates heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. To increase durability and aesthetics without compromising heat dissipation, the cover has been coated with a US-military-grade (MIL-A-8625) black anodized finish. Additional features include an engraved B&M logo, added fluid capacity for better cooling, magnetic drain plug for catching ferrous metal particles, complete hardware, installation instructions, and a 1-year warranty.

B&M_11306
B&M_11306

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

B&M New Differential Covers for Chrysler, GM, and Chevy

John Arnaud Leave a comment
Use This Post Clip for Email

The B&M Cast Aluminum Differential Cover was designed to strengthen the rear end by preventing case distortion, ring gear and cap bearing deflection. Constructed of A356.0-T6 aluminum, this rugged unit dissipates heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. To increase durability and aesthetics without compromising heat dissipation, the cover has been coated with a U.S. military-grade (MIL-A-8625) black anodized finish. Additional features include an engraved B&M logo, added fluid capacity for better cooling, magnetic drain plug for catching ferrous metal particles, complete hardware, installation instructions and a one-year warranty.

 

New Part Numbers:

11306 – Differential Cover Chrysler 9.25″ Cast Aluminum

71501 – Differential Cover GM 10.5″ 14-Bolt Cast Aluminum

71505 – Differential Cover GM 9.5″ 14-Bolt Cast Aluminum

71504 – Differential Cover Chevy 8.875″ 12-Bolt Truck Cast Aluminum

 

B&M 11306
B&M 11306

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.