Tag: 6.2l

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hedman Hedders (62566): HTC-Coated Stainless Steel Headers for Chevrolet Camaro 2010-2013 6.2L

David Ayers Leave a comment
Use This Post Clip for Email

After more than 50 years of manufacturing headers using mild steel materials, Hedman Hedders announces the introduction of performance headers manufactured using 304 stainless steel and HTC-thermal-coated 3/8″ flanges and 16-gauge 1-3/4″ tubing. All Hedman street headers are made in the USA and backed by a lifetime warranty against manufacturing defects! The HTC coating is covered for a full 5 years.

These headers are not applicable or intended for street or highway use. They are legal for racing vehicles only and may never be used upon a highway or public road. Not legal for sale or use in California.

Hedman Hedders 62566
Hedman Hedders 62566

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARP (234-7208): Pro Series Rocker Stud Kit for Small Block Chevy 6.2L (LT1/LT4)

David Ayers Leave a comment
Use This Post Clip for Email

ARP, the world leader in fastener technology, has just released a new Pro Series Rocker Stud Kit for Small Chevy 6.2L (LT1/LT4) engines.

ARP 234-7208 includes a set of sixteen 8740 chrome-moly Pro Series rocker studs and sixteen chrome-moly flange nuts.

All ARP Pro Series rocker studs are heat treated prior to thread rolling and machining and are nominally rated at 200,000 PSI tensile strength—substantially stronger than grade 8 hardware. Optimum design, enhanced reliability, and increased strength distinguish ARP’s Pro Series Rocker Stud Kits.

ARP 234-7208
ARP 234-7208

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Centerforce (04614877): DYAD DS TWIN 2014-2015 Chevrolet Corvette 6.2L LT1

David Ayers Leave a comment
Use This Post Clip for Email

Introducing the new Centerforce DYAD DS Twin, part number 04614877, for 2014-2015 Chevrolet Corvette 6.2L LT1 8-cylinder engines. The pressure plate features Centerforce’s patented Centrifugal Weight System for superior clamp load over stock and ball bearing for light pedal effort. The discs are equipped with segmented “puc”-style facings on both sides, providing increased holding capacity and longevity. Lightened steel billet flywheel allows for increased RPM. Find out why Centerforce clutches have led the way in innovation for more than 30 years.

Centerforce 04614877
Centerforce 04614877

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

K&N Corvette C7 Cold Air

K&N Gives Corvette C7 a Blast of Fresh, Cold Air

David Ayers Leave a comment
Use This Post Clip for Email

The 2014-2015 Chevy Corvette is a pretty remarkable machine fresh out of the factory: a 460-horsepower engine, capable of getting you up to 60 mph in just 3.8 seconds, still manages to get you a respectable-for-the-pop 29 highway miles per gallon. Despite those impressive specs, K&N has managed to help you get even more out of it.

K&N Air Filter
K&N Air Filter

With its cold air intake for the new 6.2L Corvette, K&N guarantees more horsepower and torque by replacing the restrictive factory air filter box and accordion hose with a free-flowing, high-density polyethylene air intake tube that minimizes restriction and increases airflow to the engine.

Dyno tests showed 12.51 more horses on average at 4,998 RPM and an extra 16.63 lb-ft of torque at 4,004 RPM. Merge it, pass it, punch it: you’ll enjoy a boost across your Vette’s entire RPM range.

The 63-3081 is married to one of K&N’s high-flow carbon-fiber air filters, which is washable and reusable and capable of going as far as 100K miles between cleanings (depending on driving conditions).

Also Features:

  • Quick installation time of 90 minutes or less with standard hand tools
  • Maintains all factory connections and does not require additional modifications
  • K&N’s Million Mile Limited Warranty

Stop into your local Performance Corner retailer to pick up K&N’s new cold air intake for the Corvette C7 yourself, or find a local affiliated store using our dealer locator.

If you are an automotive aftermarket accessory retailer who would like to become part of the nationwide Performance Corner network, please join us today!

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.