Quick Fuel Technology introduces its new PRO-STREET QFX-Series carburetors designed for higher-horsepower, larger-cubic-inch street engine applications. PRO-STREET QFX-Series carbs retain all the features found in larger CFM models, and they feature a specific fuel curve for exceptional street driveability. Gasoline use only.
2-circuit metering
Black billet metering blocks
Power valve provision
Annular boosters
QuickLink secondary adjustment
Four-corner idle system
Quick Fuel Technologies FX-975BLK
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Quick Fuel Technology introduces its new PRO-STREET QFX-Series carburetors designed for higher-horsepower, larger-cubic-inch street engine applications. PRO-STREET QFX-Series carbs retain all the features found in larger CFM models, and they feature ...
Flowmaster’s 81107 Resonator-Delete kit for the 2015 Ford Mustang base model with 3.7L V6 engine is a great way to increase the sound level of your car. These X-pipe assemblies can be used with the factory rear muffler sections or with Flowmaster’s axle-back kits. The pipe kits are constructed with 2.25″ 409S mandrel-bent tubing, manufactured in the USA, and covered by Flowmaster’s Lifetime Limited Warranty.
Stainless steel construction
Dyno tuned for maximum performance
Mandrel-bent tubing
Flowmaster 81107
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Flowmaster (81107): Scavenger X-Pipe Kit for 2015 Ford Mustang 3.7L
Flowmaster (81107): Scavenger X-Pipe Kit for 2015 Ford Mustang 3.7L
Flowmaster’s 81107 Resonator-Delete kit for the 2015 Ford Mustang base model with 3.7L V6 engine is a great way to increase the sound level of your car. These X-pipe assemblies can be used with the factory rear muffler sections or with Flowmaster...
Introducing the new Centerforce DYAD DS Twin, part number 04614877, for 2014-2015 Chevrolet Corvette 6.2L LT1 8-cylinder engines. The pressure plate features Centerforce’s patented Centrifugal Weight System for superior clamp load over stock and ball bearing for light pedal effort. The discs are equipped with segmented “puc”-style facings on both sides, providing increased holding capacity and longevity. Lightened steel billet flywheel allows for increased RPM. Find out why Centerforce clutches have led the way in innovation for more than 30 years.
Centerforce 04614877
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Centerforce (04614877): DYAD DS TWIN 2014-2015 Chevrolet Corvette 6.2L LT1
Centerforce (04614877): DYAD DS TWIN 2014-2015 Chevrolet Corvette 6.2L LT1
Introducing the new Centerforce DYAD DS Twin, part number 04614877, for 2014-2015 Chevrolet Corvette 6.2L LT1 8-cylinder engines. The pressure plate features Centerforce’s patented Centrifugal Weight System for superior clamp load over stock an...
Combining WARN dependability with aggressive pricing, the VR line makes it easy for anyone to get into winching. But the VR wouldn’t bear the WARN name if it didn’t meet the company’s rigorous QC standards. If you’ve got a big, heavy truck and want to save some cash in the winch department, the 86260 VR12000 is the perfect winch. With a stout 12,000-lb. pulling capacity and plenty of performance, this winch is big on power AND value.
Legendary WARN reliability and performance: 12,000-lb. (5440 kg) capacity
Low-profile design will fit most trucks and SUVs
Separate control pack for various mounting options
Exclusive brake design for superior control
Durable, smooth, and reliable three-stage planetary gear train
Series-wound motor for plenty of power and fast line speed
Remote control with 12′ (3.7m) lead
80′ of 3/8″ (28.6m of 9.5mm) wire rope
Backed by Warn’s full limited lifetime warranty
Warn 86260 VR12000
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
WARN (86260): VR12000 Entry-Level Winch
WARN (86260): VR12000 Entry-Level Winch
Combining WARN dependability with aggressive pricing, the VR line makes it easy for anyone to get into winching. But the VR wouldn’t bear the WARN name if it didn’t meet the company’s rigorous QC standards. If you’ve got a big...
The UC1158 UnderCover Elite textured cover for the 2015 Chevrolet Colorado/GMC Canyon 5’ crew cab short bed is the most refined UnderCover tonneau cover to date. It has been meticulously designed and engineered, making it the new standard in the aftermarket industry. The Elite has spectacular new features that set it apart, including a BOLT lockable back handle (codable to your truck’s factory ignition key) and a brighter, removable LED light.
UnderCover Elite UC1158
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
UnderCover (UC1158): Elite for 2015 Chevy Colorado/GMC Canyon
UnderCover (UC1158): Elite for 2015 Chevy Colorado/GMC Canyon
The UC1158 UnderCover Elite textured cover for the 2015 Chevrolet Colorado/GMC Canyon 5’ crew cab short bed is the most refined UnderCover tonneau cover to date. It has been meticulously designed and engineered, making it the new standard in the ...
Getting into your truck shouldn’t feel like climbing Mount Everest. AMP Research’s 77154-01A PowerStep XL for the 2007-2015 Silverado/Sierra crew cab is an automatic, electric-powered running board designed for lifted trucks. The board has been integrated into a custom rocker rail, creating a seamless look while providing a 3” lower stepping surface than the original PowerStep that makes accessing lifted trucks easier.
Automatic, power-deploying running boards
Low-profile, integrated LED system standard
Rail constructed of 3mm, thick-walled mild steel for maximum strength
Attractive and durable black wrinkle-coat finish
Step, die-cast aluminum-alloy components with an anodized and PTFE-coated, military-spec finish to resist corrosion
Precision stainless steel pivot pins for rock-solid stability
Fully welded/integrated bracket system supports up to 600 lb.
Weatherproof, OEM-quality electric motors, drive system, and wiring harness
Maintenance-free, self-lubricating bushings for all-weather performance
5-year/60,000 mile warranty
Designed and built in America
Amp Research 77154-01A
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
AMP Research (77154-01A): 2007-2015 Silverado/Sierra Crew Cab Plug-and-Play PowerStep XL
AMP Research (77154-01A): 2007-2015 Silverado/Sierra Crew Cab Plug-and-Play PowerStep XL
Getting into your truck shouldn’t feel like climbing Mount Everest. AMP Research’s 77154-01A PowerStep XL for the 2007-2015 Silverado/Sierra crew cab is an automatic, electric-powered running board designed for lifted trucks. The board h...
Westin’s 57-3835 HDX grille guard for the 2015 Ford F-150 makes a bold and stylish statement with its 2″ diameter tube frame and full punch plate grille. It’s one-piece welded frame includes 1/8″ thick and 2″ wide HD rubber upright strips. The 57-3835 is finished in a black powdercoat. Optional light clamps are available, 57-0000 in SS and 57-0005 in BLK, which allow lights to be mounted to the cross tube and punch plate. HDX grille guards are available in stainless steel and black powdercoat.
Features:
2″ tube, full wrap-around wings
Full “punch plate” grille
One-piece welded uprights
HD rubber upright strips
1.25″ tube for support wings
Mount kit included
Westin 57-3835
Special Notes: Will interfere with function of front camera if equipped. Excludes models with “Adaptive Cruise (Speed) Control,” or Forward Collision Warning Systems that feature grille-mounted laser-control sensors. Removal of tow hooks required for installation, if equipped. Minor trimming to tow hook pocket area required.
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Westin (57-3835): HDX Heavy-Duty Grille Guard for 2015 Ford F-150
Westin (57-3835): HDX Heavy-Duty Grille Guard for 2015 Ford F-150
Westin’s 57-3835 HDX grille guard for the 2015 Ford F-150 makes a bold and stylish statement with its 2″ diameter tube frame and full punch plate grille. It’s one-piece welded frame includes 1/8″ thick and 2″ wide HD rub...
The Spartacus HD Tire Carrier System provides the ultimate in strength and stability for mounting your oversized wheel and tire; it is functionally designed to manage the amplified force and vibrations produced during extreme off-road conditions. The precision die-cast aluminum hinge casting provides maximum strength without the excess weight of steel. The one-piece design maintains one-handed access to cargo and rigidly links the wheel mount to the reinforced section of the rear quarter panel. In combination with forged steel hinge brackets and hardened steel pins, this results in superior load capacity over factory tailgate hinges, reducing wear and increasing longevity. The wheel mount lifts the mounting position and incorporates depth and tilt adjustability for large diameter and wide tire options. Tested to MIL-STD-810 to simulate extended duration of vigorous off-road driving conditions. Rated for up to and including 37” wheel tire combinations. Includes adjustable third brake light bracket. Compatible with OE and most aftermarket rear bumpers. No drilling required.
Rugged Ridge 11546.50
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Rugged Ridge (11546.50): HD Tire Carrier Kit for 2007-2015 Jeep Wrangler JK
Rugged Ridge (11546.50): HD Tire Carrier Kit for 2007-2015 Jeep Wrangler JK
The Spartacus HD Tire Carrier System provides the ultimate in strength and stability for mounting your oversized wheel and tire; it is functionally designed to manage the amplified force and vibrations produced during extreme off-road conditions. The...
The closed-cell urethane foam jounce bumper inside each 88349 LoadLifter 5000 ULTIMATE adjustable air spring kit for the 2015 Ford F-450 provides a cushion of air that absorbs shock, eliminates harsh jarring on rough roads, and protects vehicles that are carrying heavy loads. Vehicles using this innovative new product may never bottom out again due to the shock-absorbing properties of the internal jounce bumper.
The ULTIMATE air spring kit is maintenance-free. Drivers can safely run with zero air pressure for limited amounts of time because the internal jounce bumper protects the bag from any potential damage. While the factory jounce bumper is sometimes removed when installing standard air springs, the ULTIMATE air springs use an internal jounce bumper for the optimal ride and comfort when towing or hauling.
LoadLifter 5000 and LoadLifter5000 ULTIMATE kits are Air Lift’s heaviest-rated kits, specifically engineered for hauling or towing heavy loads. All if them work with a vehicle’s existing suspension to give up to 5,000 pounds of extra leveling capacity when needed, right up to the manufacturer’s recommended Gross Vehicle Weight rating. Rugged and durable, LoadLifter 5000 air springs are reinforced with layers of fabric and rubber, similar to how a tire is manufactured. The end caps are constructed from ultra-high-strength composite nylon; strong as steel, but lighter and corrosion proof.
Air adjustable from 5 to 100 PSI, Air Lift air spring kits increase safety and comfort by helping to level and stabilize vehicles when towing or hauling heavy loads. A level, stable vehicle results in better braking, steering, and headlight aim, in addition to reducing sway, “porpoising”, and bottoming out. Just add air when loaded and reduce air pressure when riding unloaded.
Includes:
2 air springs
All necessary mounting brackets
Air lines
Schrader valve
Installation hardware
A fully illustrated instruction manual
Air Lift Company 88349
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Air Lift Company (88349): LoadLifter 5000 ULTIMATE Air Spring Kit with Internal Jounce Bumper for 2015 Ford F-450
Air Lift Company (88349): LoadLifter 5000 ULTIMATE Air Spring Kit with Internal Jounce Bumper for 2015 Ford F-450
The closed-cell urethane foam jounce bumper inside each 88349 LoadLifter 5000 ULTIMATE adjustable air spring kit for the 2015 Ford F-450 provides a cushion of air that absorbs shock, eliminates harsh jarring on rough roads, and protects vehicles that...
Designed for 1997 and later GEN 3 and 4 LS1/LS2 Chevy engines, including 4.8L, 5.3L, 5.7L, and 6.0L. All E-CNC cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved air-flow. Dyno tests proved these heads are capable of 457 hp and 438 ft-lb. of torque. High-quality conical beehive springs are secured with steel retainers and valve locks for performance up to .600″ valve lift. Match with any one of Edelbrock’s LS series intake manifolds and camshafts for a dyno-proven performance combination. E-CNC 215 head is 50-state street legal.
Features:
Combustion chamber volume: 65cc
Intake runner volume: 212cc
Exhaust runner volume: 76cc
Intake valve diameter: 2.02″
Exhaust valve diameter: 1.57″
Valve stem diameter: 8mm
Valve guides: manganese steel
Deck thickness: 5/8″
Valve spring diameter: 1.55″ / 1.30″
Valve spring maximum lift: .600″
Pushrod diameter: 5/16″
Valve angle: 15°
Exhaust port location: Stock
Spark plug fitment: 14mm x .750 reach, gasket seat
Edelbrock 79949
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Edelbrock (79949): E-CNC 215 Cylinder Heads for Chevy LS1/LS2
Edelbrock (79949): E-CNC 215 Cylinder Heads for Chevy LS1/LS2
Designed for 1997 and later GEN 3 and 4 LS1/LS2 Chevy engines, including 4.8L, 5.3L, 5.7L, and 6.0L. All E-CNC cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved air-flow. Dyno tests proved the...
Share This Post!