Rancho (RS66107B): 3-Inch Trail System for ’07–’15 Jeep Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

If you’re looking for the perfect ride for your Jeep Wrangler or Wrangler Unlimited, look no further than the 3” Trail System from Rancho. In addition to the enhanced ride and overall stance, this system gives you the ability to add larger tires to your JK—35” in the case of the 3” Trail System—without compromising the caster and pinion angle. Made in the USA!

  • Fits up to 35-inch tires.
  • Front/rear coil springs, front adjustable track bar, and front/rear adjustable upper control arms included.
  • Extended-length front sway bar end link.
  • Upgraded front and rear bump stop spacer.
  • Front extended-length brake lines.
  • Rear track bar bracket and rear brake line drop brackets.
  • Will not affect the Electronic Stability Control System.
  • Brackets are made from high-strength, low-alloy steel.
  • 100% bolt-on system!
Rancho (RS66107B): 3-Inch Trail System for ’07–’15 Jeep Wrangler JK
Rancho (RS66107B): 3-Inch Trail System for ’07–’15 Jeep Wrangler JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive (31-5990): E-Series Bull Bar for ’16 Ford F-150

David Ayers Leave a comment
Use This Post Clip for Email

The E-Series Bull Bar from Westin is a front-end light bar designed for trucks and larger model SUVs. It boasts a tubular shape crafted from 3” polished stainless steel and mounts to your 2016 Ford F-150’s existing mounting points—no drilling required (mount kit included).

31-5990 also features mounting points for two auxiliary lights up to 6” in diameter (perfect for a set of Westin driving lights), while a laser-cut Westin block logo adorns the stainless steel skid plate. The E-Series Bull Bar is backed by a lifetime warranty.

  • 3” diameter tubing.
  • Unique brushed skid plate design.
  • Fully welded cross tubes.
  • Two mounting points on top of center bar.
  • Mount kid included.
  • Optional 20” LED light-mounting and license plate brackets available.
  • Made in the USA.
Westin Automotive (31-5990): E-Series Bull Bar for ’16 Ford F-150
Westin Automotive (31-5990): E-Series Bull Bar for ’16 Ford F-150

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Extang Trifecta Tri-Fold Tonneau Cover

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we install the Trifecta Tri-Fold Tonneau from Extang on a 2015 Ram 1500.

Parts used in this video:

Extang Trifecta Tri-Fold Tonneau (Part# 44425)

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2015 PRI Show – Flaming River

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Flaming River’s very own Brett Domin goes over some of their new rack and pinion kits for 2016. Be on the lookout for more videos from this series over the coming weeks.

Want to check out more about Flaming River? http://www.performancecorner.com/index.php/manufacturer?id=50/

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock (14073): Performer Series 750-cfm Manual Choke Carburetor

David Ayers Leave a comment
Use This Post Clip for Email

Calibrated for performance, the 14073 750-cfm Manual Choke Carburetor from Edelbrock provides optimum street performance in small- and big-block engines with Performer RPM, RPM Air-Gap, or Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance.

Made from black powder-coated aluminum, this carb provides cooler operating temperatures and less warping. Intended for stock to performer-level applications and calibrated for fuel economy.

  • Single-inlet, manual choke.
  • 750 cfm, 4 bbl, square bore.
  • Metering jets: .113 primary and .107 secondary.
  • Metering rods: .071 x .047.
  • Step-up spring: orange (5” Hg).
  • Made in the USA.
Edelbrock (14073): Performer Series 750-cfm Manual Choke Carburetor
Edelbrock (14073): Performer Series 750-cfm Manual Choke Carburetor

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley: Sniper Self-Tuning EFI

David Ayers Leave a comment
Use This Post Clip for Email

The Sniper Self-Tuning EFI from Holley brings EFI within range of your build budget. The Sniper is economically priced to give you all the benefits of EFI with money left over to finish or upgrade the rest of your ride. Perfect for street rods, muscle cars, off-road trucks, or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding with the Sniper!

Coming June 2016!

  • Bolt-on carburetor replacement (designed to fit single and dual carb manifolds).
  • Throttle body–mounted ECU—no extra boxes to mount.
  • Supports up to 600 hp or 1,200 hp (4- and 8-injector versions, respectively).
  • Four-wire vehicle connection (battery +, battery –, switched ignition, and rpm).
  • Integrated fuel pressure regulator, timing control, and coil driver.
  • Color touchscreen for setup and gauge views.
  • Calibration wizard—no laptop required!
  • Self-tuning convenience.
  • Available in base and master kits (complete fuel systems).
Holley: Sniper Self-Tuning EFI
Holley: Sniper Self-Tuning EFI

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rampage Products: Rhino Linings Rocker Guards for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

All new from Rampage Products are Rhino Linings Rocker Guards for 2007–2016 Wrangler JKs (Limited and Unlimited) and 1997–2006 TJs. Made from Rhino® Linings polyurethane, these products are custom designed for your Jeep’s size and shape and help prevent scratches and dings caused by rocks and other flying debris. They not only add protection, but they also look great and are easy to install.

  • Protect your rocker panels from road debris.
  • Made from durable Rhino Linings polyurethane.
  • Go on securely via included adhesive backing.
  • JK kits protect rocker panels, lower doors, rear corner panels, and cowl covers.
  • TJ kits protect rear rocker panels, corner panels, and cowl covers.
  • Made in the USA.
  • Warranty: limited lifetime.
Rampage Products: Rhino Linings Rocker Guards for Jeep Wrangler
Rampage Products: Rhino Linings Rocker Guards for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rigid Industries (41595): RDS-Series LED Grille for ’15–’16 GMC Canyon

David Ayers Leave a comment
Use This Post Clip for Email

Rigid Industries is introducing a new grille featuring an RDS-Series 30” Hybrid Spot Optics LED Light Bar for the 2015–2016 GMC Canyon. Sporting a novelty Rigid Industries emblem, this two-piece grille is made from laser-cut, black powder-coated 304 stainless steel and is assembled using stainless steel button socket head bolts and nyloc nuts—no welds. All hardware and instructions are included; professional installation recommended, as OEM grille shell modification is required.

  • Aggressive Rigid styling.
  • Stainless steel construction.
  • Black powdercoat.
  • All hardware included.
  • Limited lifetime warranty.
  • Made in the USA.
Rigid Industries (41595): RDS-Series LED Grille for ’15–’16 GMC Canyon
Rigid Industries (41595): RDS-Series LED Grille for ’15–’16 GMC Canyon

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2015 PRI Show – Energy Suspension

David Ayers Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Energy Suspension’s very own Michael Santa Cruz goes over their new suspension components for 2016. Be on the lookout for more videos from this series over the coming weeks.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Extang Solid Fold 2.0

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we install the Solid Fold 2.0 from Extang on a 2015 Ram 1500.

Parts used in this video:

Extang Solid Fold 2.0 (Part# 83425)

Want to check out more about Extang? Check out facebook here: https://www.facebook.com/performancecorner

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.