Holley: Aluminum Track Warrior Carburetors

David Ayers Leave a comment
Use This Post Clip for Email

The all-new aluminum Track Warrior carburetor takes the best features of Holley‘s Race Bred Classic 4150 hp carbs and adds billet metering blocks, a billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. The Track Warrior features a contoured-aluminum main body and boasts screw-in air bleeds for precision tuning capabilities. Available in 650, 750, and 850 cfm in purple or black, the Holley Track Warrior weighs up to 40 percent less while pushing on-the-track performance to the next level!

 Features

  • Aluminum construction for weight savings and long-lasting good looks.
  • Color options include purple or black.
  • Optimized race calibrations for outstanding throttle response.
  • Contoured venturi inlet offers balanced airflow for increased horsepower.
  • Screw-in air bleeds for precision tuning capabilities.
  • Four-corner idle for precise idle control.
  • Mechanical secondaries for awesome tire-turning performance.
  • Billet metering blocks for improved durability (over cast blocks).
  • True gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictor, and idle feed restrictors).
  • Available in 650, 750, and 850 cfm versions.
  • For lightweight vehicles with manual trans or automatics with high stall and low gearing.
  • 100% wet-flow tested by Holley technicians to ensure on-arrival performance!
Holley: Aluminum Track Warrior Carburetors
Holley: Aluminum Track Warrior Carburetors

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge: Eclipse Hardtop Sun Shade for 2007+ Jeep Wrangler JK/JKU

David Ayers Leave a comment
Use This Post Clip for Email

The Eclipse Sunshade for 2007–2016 Jeep Wrangler and Wrangler Unlimited from Rugged Ridge provides the open-air feeling you want along with extra protection from harsh sunlight. Made from reinforced mesh, this half sun shade installs between the front portion of your JK’s sport bar and windshield to protect either front or rear passengers separately. By using mesh material with built-in elastic straps, this sunshade eliminates the need for the header channel required by similar products.

An all-in-one package, Rugged Ridge’s Eclipse sun shade goes on easily without modification to your vehicle. By retaining access to the Jeep top clamps, drivers can keep the shade in place while preserving hard top functionality.

Available in red (13579.40), black (13579.10), and with an American flag graphic (13579.20).

Features

  • Open-air feeling with the benefit of sunlight screening.
  • Reinforced mesh material.
  • Requires no header channel.
  • No-modification installation.
  • Maintains access to Jeep top clamps.
  • Backed by Omix-ADA limited warranty.
Rugged Ridge: Eclipse Hardtop Sun Shade for 2007+ Jeep Wrangler JK/JKU
Rugged Ridge: Eclipse Hardtop Sun Shade for 2007+ Jeep Wrangler JK/JKU

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Putco Nite-Lux LED Kit

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we upgrade the foglights on a 2015 Ford F-150 with the Nite-Lux LED Kit.

Parts used in this video:

Putco Nite-Lux LED Kit (270010)

Want to check out more about Putco? http://www.performancecorner.com/index.php/manufacturer?id=94/

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Demon Carburetion: Aluminum Mighty Demon Carburetors

David Ayers Leave a comment
Use This Post Clip for Email

Demon Carburetion’s next generation of Demon carburetor has arrived: the all-new Aluminum Mighty Demon is available in a full range of sizes and options for your street/strip car. These carburetors feature billet-aluminum metering blocks and baseplates and large-capacity fuel bowls with dual sight glasses, dual threaded inlets on each side, and internal baffling to prevent fuel slosh on the track. The aluminum Mighty Demon delivers more power and performance for high-horsepower street and race engines.

 Features

  • All-aluminum polished construction with billet metering blocks and baseplate.
  • 40% lighter than the original Demon!
  • Redesigned fuel bowl and main body for a sleeker, more stylish appearance.
  • Completely reimagined for better drivability and full-throttle performance.
  • New throttle lever with integrated Ford A/T, 700-R4, and Chrysler kick down options.
  • Fuel bowls now have dual threaded inlets on each side, dual sight glass windows, and internal baffling for improved fuel slosh control.
  • Secondary fuel bowls include notched floats and jet extensions to prevent fuel starvation during hard launches.
  • Changeable idle, high-speed air bleeds, and power valve restrictions for precision tuning.

Demon Carburetion Mighty Demon Carburetor MAD-750-AN_01

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

SCT: Livewire TS+ Tuner

David Ayers Leave a comment
Use This Post Clip for Email

Available for most 1996-and-up gas and diesel vehicles, the Livewire TS+ from SCT unlocks hidden performance by recalibrating your vehicle’s computer for maximum horsepower and torque, better throttle response, firmer shifts, and increased fuel efficiency.

Whether you’re towing a fully loaded race trailer or a 5th wheel camper, Livewire TS+ tunes add the perfect combination of horsepower and torque to make hauling loads easier. And with SCT’s On-The-Fly technology, you can easily switch between performance and towing modes while driving! Includes suction cup–style windshield mount for easy viewing.

Though options vary depending on vehicle, the following are some of the adjustments you can make with the Livewire TS+: Axle Ratio, CMCV Delete, Disable DOD, Exhaust Y-Pipe, Fan Control, Global Spark, Headers, Idle Adjust, Jake Brake, Pedal Response, Rev Limiter, Shift Assist, Speed Limiter, Throttle Body, Tire Size, Torque Reduction, Traction Control, Shift Points/Firmness, and many more!

Note: This product does not support any changes to your vehicle’s emission system, and is not legal for sale or use in California on pollution-controlled motor vehicles.

Features (vary per vehicle; see your specific application for full details)

  •  4” color touch screen display.
  • Switch On-The-Fly power-level adjustment.
  • Holds up to 10 custom tunes (in addition to preloaded tunes).
  • Automatic on/off/sleep mode.
  • Integrated performance calculator.
  • High-speed data logging and monitoring.
  • Rearview camera input.
  • Reads and clears DTC codes.
  • User-adjustable tune options (e.g., cold air kits, exhaust systems, gears, etc.).
  • User-adjustable warnings/alerts.
  • User-selectable graphics and gauge layouts.

SCT Livewire TS+

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive (59-9525-12JKB5): Snyper Marksman Bull Bar / Front Bumper for JK

David Ayers Leave a comment
Use This Post Clip for Email

The one-piece Snyper Marksman (59-9525-12JKB5; textured black finish) from Westin Automotive is two rough and rugged products in one: a full-width off-road winch bumper with welded bull bar for Jeep Wrangler JK. Constructed from 7-gauge steel and predrilled for winches up to 10.25” tall with 8–12K capacities, the Snyper Marksman boasts an aggressive, chiseled design that looks and performs like a champ.

This product includes four openings for flush-mount LED auxiliary lights, 1” thick shackle mounts, and a laser-cut Snyper logo, and is backed by Westin’s 1-year warranty on finish and limited lifetime warranty on workmanship.

Features

  • Front winch bumper with welded bull bar for Jeep Wrangler JK.
  • One-piece, 7-gauge steel construction with laser-cut Snyper logo.
  • Accommodates most medium-frame 8,000–12,000 lb. winches up to 10-1/4” tall.
  • Predrilled for winch and fairlead mounting.
  • Fits most (4) flush-mount auxiliary lights.
  • Includes 1” thick HD shackle mounts.
  • Mounting brackets mount directly to frame.
  • Textured black finish.
  • Limited lifetime warranty on workmanship; 1-year warranty on finish.

Westin Automotive Snyper Marksman Bumper Bull Bar JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Putco Silver-Lux LED Kit and SwitchBack LED DayLiner

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we improve the overall visibility of a 2015 Ford F-250 by installing the Silver-Lux LED Kit and SwitchBack LED DayLiner.

Parts used in this video:

Putco Silver-Lux LED Kit (280H13)

Putco SwitchBack LED DayLiner (290160T)

Want to check out more about Putco? http://www.performancecorner.com/index.php/manufacturer?id=94/

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Rightline Gear Jeep Soft Top Window Storage Bag

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we check out a very versatile storage option for the windows on our 2016 Jeep Wrangler Unlimited Sport Edition.

Parts used in this video:

Rightline Gear Jeep Soft Top Window Storage Bag (100J78-B)

Want to check out more about Rightline Gear? http://www.performancecorner.com/index.php/manufacturer?id=138/

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Auto Meter: Direct-Fit American Muscle Dash Kits

David Ayers Leave a comment
Use This Post Clip for Email

Upgrade your classic 60s, 70s, or early-80s muscle car or truck with an Auto Meter Direct-Fit American Muscle Dash Kit. Each easy-to-install kit includes a durable replacement dash panel, six iconic American Muscle gauges, a universal wiring harness, sending units, LED lighting dimmer, and all necessary mounting hardware. LED through-dial lighting ensures optimal visibility during low-light conditions while Auto Meter‘s easy, no-fab installation allows you to preserve the original interior of your classic ride.

More than a dozen models are available, including those for Camaro, Firebird, Nova, Chevelle, El Camino, Monte Carlo, Malibu, Challenger, Suburban, GM E-body and A-body, and more!

Features

 Simplicity: Takes the guesswork out of deciding what gauges to use—included pieces satisfy functionality and nostalgia.

  • Clean installation: Uses factory mounting locations and hardware—no cutting, drilling, or dash modification required.
  • Precision-molded, durable, and UV-protected ABS plastic replacement dash panel.
  • Six all-electric American Muscle gauges: tachometer, speedometer, water temperature, oil pressure, voltmeter, and OE-specific fuel level.
  • Universal 6-gauge wiring harness.
  • All necessary sending units and mounting hardware.
  • LED dimmer and installation instructions.
  • Made in the USA!
Husky Liners: KickBack Mud Flaps for Lifted Trucks
Husky Liners: KickBack Mud Flaps for Lifted Trucks

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.