Offer good March 1 to April 30. Click image for printable form and complete details!
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Bestop: Get $100 Back on Trektop for TJ, JK, and JL During “Driving Adventure” Event
Bestop: Get $100 Back on Trektop for TJ, JK, and JL During “Driving Adventure” Event
Offer good March 1 to April 30. Click image for printable form and complete details!
...
Offer good March 1 to April 30. Click image for printable form and complete details!
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Bestop: Get $100 Back on Sunrider for Hardtop During “Driving Adventure” Event
Bestop: Get $100 Back on Sunrider for Hardtop During “Driving Adventure” Event
Offer good March 1 to April 30. Click image for printable form and complete details!
...
The
ONE Bluetooth relay from TRIGGER
is the first (and only!) plug-and-play wireless solid state relay for
controlling existing light installations with either an iOS or Android mobile
device via the TRIGGER Plus app. The ONE can also control a winch or turn on a
radio system from outside the vehicle. Add it to a trailer light circuit to
activate an outside light from the grille or campfire—anywhere a conventional relay
is used, replace it with the ONE for wireless convenience!
The
TRIGGER Plus app unlocks even more features, including activation of a flashing
mode or changing the brightness of connected lighting (as compatible). Notably,
it allows individual circuits to be set to either a “momentary” or “toggle”
mode; for example, if you want to briefly activate a train horn instead of just
toggling it on. The compact and waterproof TRIGGER
ONE wireless relay handles up to 30 amps of current.
Features
Plug-and-play
solid state wireless relay
Control
existing light installations or other equipment like winches and radios
Use
anywhere you would use a conventional relay
Pair
with TRIGGER Plus app for more features
Set
individual circuits to “momentary” or “toggle” mode for precise control
Compact
and waterproof
Handles
up to 30 amps of current
No
wires through the firewall
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
TRIGGER: ONE Bluetooth Relay
TRIGGER: ONE Bluetooth Relay
The
ONE Bluetooth relay from TRIGGER
is the first (and only!) plug-and-play wireless solid state relay for
controlling existing light installations with either an iOS or Android mobile
device via the TRIGGER Plus app. The ONE can also control a wi...
Made
from laser-cut, black powder-coated, one-piece mild steel, the Laser X Grille is
a modern upgrade of the traditional X-Metal Grille from T-Rex Grilles,
with a unique, repeating honeycomb pattern and X-Metal studs/badging. The
6315821 Laser X Grille for 2019–2020 Ford Ranger comes with chrome studs, but enthusiasts
can also achieve a blacked-out look with black studs by purchasing the Stealth
Laser X version of the grille.
Made
in T-Rex
Grilles’ California facility, the Laser X Grille was designed using advanced
3-D, CAD-supported engineering and undergoes a multistage process to ensure
meticulous performance, lasting protection, and an OEM-quality finish.
Features
For
2019–2020 Ford Ranger
Laser-cut,
one-piece mild steel
Custom
repeating honeycomb pattern
Chrome
X-Metal studs and badging
Black
powdercoat
Stainless
steel hardware
Full-color
instructions
Made
in America
Warranty:
lifetime (structural), three years (finish)
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
T-Rex Grilles (6315821): Laser X Grille with Chrome Studs for ’19-’20 Ford Ranger
T-Rex Grilles (6315821): Laser X Grille with Chrome Studs for ’19-’20 Ford Ranger
Made
from laser-cut, black powder-coated, one-piece mild steel, the Laser X Grille is
a modern upgrade of the traditional X-Metal Grille from T-Rex Grilles,
with a unique, repeating honeycomb pattern and X-Metal studs/badging. The
6315821 Laser X ...
Made
from rugged thermoplastic, the low-profile Aeroskin LightShield™ hood protector
from AVS
is the only product of its kind that adds amber LED marker lights to the edge
of your hood. The integrated light bar of the 753189 Aeroskin LightShield™ includes
five LED marker lights that connect directly into the parking lights of
2019–2020 Ram 2500/3500 pickups for a seamless integration. Enjoy a dramatic
and distinctive look along with protection for your beloved ride from AVS.
Features
For
2019–2020 Ram 2500 and 3500 trucks
Only
hood protector with amber LED marker lights
Low-profile,
black thermoplastic hood protection
Connects
to your parking lights for a seamless integration
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
AVS (753189): Aeroskin LightShield™ Hood Protector for ’19-’20 Ram 2500/3500
AVS (753189): Aeroskin LightShield™ Hood Protector for ’19-’20 Ram 2500/3500
Made
from rugged thermoplastic, the low-profile Aeroskin LightShield™ hood protector
from AVS
is the only product of its kind that adds amber LED marker lights to the edge
of your hood. The integrated light bar of the 753189 Aeroskin LightS...
The Adapt E-Series 50″ LED light bar from RIGID Industries features two layers of adaptive response to optimize your off-road lighting experience.
The
first layer, called Active Power Management™, constantly monitors input voltage
to adjust the amount of power drawn by the Adapt E-Series bar. This on-the-fly
system will gradually reduce power consumption as needed until your vehicle’s
power supply stabilizes.
The
second layer, RIGID’s
Active View Technology™, uses an internal GPS module to properly distribute
power among three unique optic zones based on your vehicle’s speed—creating a beam
pattern optimal for your current activity. The output seamlessly transitions
among Scene optics for low speeds, Driving optics for moderate speeds, and Spot
optics for high speeds.
The 50” RIGID Adapt E-Series LED light bar (PN 290413) actively manages power consumption and light output so you can Own the Night.
Features
Two
layers of adaptive technology manage power draw and light output.
Internal
GPS module and three optic zones (Scene, Driving & Spot)
Fit
all existing E-Series grilles/mounts
High-grade
aluminum alloy heat sink and high-impact polycarbonate lenses
9–36
VDC
Pressure-equalizing
vent and over/under voltage protection
Include
harness, switch, and relay
Warranty:
limited lifetime
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
RIGID Industries (290413): Adapt E-Series 50″ LED Light Bar
RIGID Industries (290413): Adapt E-Series 50″ LED Light Bar
The Adapt E-Series 50″ LED light bar from RIGID Industries features two layers of adaptive response to optimize your off-road lighting experience.
The
first layer, called Active Power Management™, constantly monitors input voltage...
Offer good March 15 to May 15. Click image for printable form and complete details!
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Rugged Liner: Get US$75 or CA$100 Back on E-Series Hard Folding Truck Bed Covers
Rugged Liner: Get US$75 or CA$100 Back on E-Series Hard Folding Truck Bed Covers
Offer good March 15 to May 15. Click image for printable form and complete details!
...
Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we welcome Brian Farley from ARIES to the garage and we talk about their AscentStep™ Running Boards and install them on a 2018 Ford F-150.
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
In the Garage™ with Performance Corner®: ARIES AscentStep™ Running Boards
In the Garage™ with Performance Corner®: ARIES AscentStep™ Running Boards
Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we welcome Brian Farley from ARIES to the garage and we talk about their AscentStep™ Runni...
Putco® is offering a $150 rebate with the purchase of the
new VentureTEC™ Rack system, starting March 15 and running through May 15. This
rebate applies to any VentureTEC™ Rack system, excluding accessories (limit two
VentureTEC™ Racks per rebate).
To qualify for the rebate, complete the following steps:
Include the original sales receipt for the
Putco® VentureTEC™ Rack
Cut out the UPC/barcode from the original
packaging
Mail all above components to:
Putco VentureTEC Rebate
P.O. Box 763
Walled Lake, MI 48390
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Putco: Get $150 Back on the VentureTEC™ Rack System
Putco: Get $150 Back on the VentureTEC™ Rack System
Putco® is offering a $150 rebate with the purchase of the
new VentureTEC™ Rack system, starting March 15 and running through May 15. This
rebate applies to any VentureTEC™ Rack system, excluding accessories (limit two
VentureTEC...
With
a unique triangular design and three-point mounting system that eliminate
rattling against the body of your Jeep, the Go Rhino 701003T
jack mount fits any-height farm-style tall jack and frees up precious interior cargo
space by mounting on the exterior. Designed specifically to fit Wrangler JK and
JKU.
Features
For
Jeep Wrangler JK and JKU
Strong
steel protected by a textured-black powdercoat
Exclusive
triangular design and three-point mounting system eliminate rattling.
Fits
any-height farm-style jacks, including major name brands
Exterior
mounting frees up precious cargo space inside the vehicle.
No-drill
installation using factory side step and windshield A-pillar mounts
Compatible
with Go Rhino
XE Series windshield light frame (PN 730503T)
Warranty:
5-year limited
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Go Rhino (701003T): Jack Mount for Jeep Wrangler JK/JKU
Go Rhino (701003T): Jack Mount for Jeep Wrangler JK/JKU
With
a unique triangular design and three-point mounting system that eliminate
rattling against the body of your Jeep, the Go Rhino 701003T
jack mount fits any-height farm-style tall jack and frees up precious interior cargo
space by mounting on the...
Share This Post!