Designed to lower your truck +1” to -3” in the front and 5.5” in the rear, this all-new lowering kit from Belltech is just what you need to give your 2015–2016 Ford F-150 a low, aggressive stance. With all components required to properly lower your vehicle (including street performance shocks and flip kit), this Stage 3 kit fits Extended/Crew Cab short bed F-150s of the specified years.
Features
Fits 2015–2016 Ford F-150 (Ext/Crew Cab short bed).
Stage 3 complete solution.
+1” to -3” F/5.5” R.
Street performance shocks.
Belltech: Lowering Kit for 2015+ Ford F-150 Extended/Crew Cab Short Bed
The BR5 Front Bumper Replacementfor the 2015–2016 Ford F-150 from Go Rhino is constructed from two-piece welded steel (bumper shell and mounting plate/winch tray). Able to accommodate winches rated up to 12,500 lb., the 24295T features integrated light ports and heavy-duty D-shackle mounts that are mounted directly to the frame rails for extra strength. A durable black textured powdercoat and 5-year warranty give you peace of mind after the purchase.
Features
1” steel D-shackle mounting clevis (shackles not included).
5K winch capacity, with framed mesh vent cover for proper airflow (winch not included).
Functional, removable steel mesh covers add protective airflow to winch (winch not included).
Flush-mounted light ports.
Light bar and 3″ × 3″ light mounts available (sold separately).
Frame-mounted for optimal strength; no-drill installation!
Fit 2- and 4-wheel drive models and Ecoboost models; will not fit models with Active Park Assist or Adaptive Cruise Control.
Textured black powder-coated finish.
Backed by a 5-year warranty.
Go Rhino (24295T): BR5 Front Bumper Replacement for ’15–’16 Ford F-150
Based on the platform-designed Blackheart line—engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality—is Hooker’s new Axle-Back Dual Transverse Dual Mode Exhaust System with Quad Tips for manual 2016 Chevy Camaro SS with 6.2L V8. It offers max dyno gains of +15.88 hp and 17.71 ft.-lb. torque by eliminating the restrictive factory mid-pipe where the exhaust tube is crushed.
70401319-RHKR uses dual polished 304 stainless steel, high-flow, straight-through transverse mufflers and exhaust valves that provide a pleasant driving experience at cruising speeds when closed and an aggressive, race-inspired tone when open. The system uses factory mounting points for ease of installation, while 4” dual-wall, angle-cut, polished stainless steel quad tips with laser-etched Hooker Blackheart logo offer unmatched styling.
Elite II Oval Air Cleaners from Edelbrock are a modern take on the company’s original Elite Series, which debuted in 1985. They’re made from heavy-gauge, die-cast aluminum and are finished off with a lustrous, show-quality polished finish. To achieve the definitive Elite Series look, Elite II Oval Air Cleaners feature a glossy black finish between the fins.
This product fits all popular 5-1/8″ diameter carburetors and comes with a black anodized knurled nut and a quality 2-1/2” pre-oiled, washable, and reusable Pro-Flo Universal filter with Pro-Charge™ clean strip for easy maintenance and excellent filtration. Including everything needed for complete installation, these kits fit Edelbrock single- and dual-quad applications and should clear HEI distributors and stock parts. Match these air cleaners with Elite II valve covers for a complete look under the hood.
The following part numbers are currently available:
4272: Oval with 2.5” element for Edelbrock dual-quad carbs
4273: Oval with 2.5” element for single 4-barrel carbs
1226: Replacement Pro-Flo oval 2.5” element only
Features
Fits all popular 5-1/8” diameter carbs
2-1/2” pre-oiled and reusable Pro-Flo Universal filter included
Compatible with Edelbrock single- and dual-quad applications
Rugged Ridge is giving you what you need to further personalize your 2007–2016 JK’s front end with the Spartan Grille mesh insert. With its two 3.5” round LEDs (included), part number 12034.13 will distinguish your Jeep from the crowd and give you extra illumination on the trail.
Insert is compatible only with the Rugged Ridge original Spartan Grille (12034.01).
Features:
Spartan Grille–specific mesh insert
Includes two 3-1/2” round LEDs
Backed by a 5-year limited warranty
Rugged Ridge (12034.13): Spartan Grille LED Insert with Dual 3.5-Inch LEDs for ’07–’16 JK
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.
In this video, we take a closer look at the following from Vision X:
AMP Research PowerStep™; Black; includes Light Kit (75122-01A)
The Outlaw Axle-Back Exhaust System provides an aggressive exhaust tone both inside and outside your 2016 Chevrolet Camaro SS coupe or convertible—with all the performance gains you expect from the experts at Flowmaster. This bolt-on, emissions-legal system for the 6.2L V8 features a pair of 409S stainless steel Outlaw Series mufflers with 3” stainless steel mandrel-bent pipes.
The 817745 sports benefits such as improved throttle response, mileage, and power. Finished off by 4” polished-black, PVD-coated stainless steel tips, this Chevy exhaust system is manufactured in the USA, is covered by Flowmaster’s Lifetime Limited Warranty, and includes all the parts and hardware required for installation.
Note: Automatic transmission models include active exhaust valves that operate while in MDS mode. These valves are retained with this system. Does not fit models with the Performance Exhaust Option
Fits 2016 Chevrolet Camaro SS couple or convertible models.
Bolt-on installation.
Emissions legal.
Dyno-tuned, race-proven technology.
Produces a very aggressive interior and exterior tone.
3” mandrel-bent stainless steel pipes and 4” black tips.
Made in America and backed by Flowmaster’s Limited Lifetime Warranty.
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS
Purple Ice, the reformulated cooling system optimizer and conditioner from Royal Purple, is the most advanced product of its kind, reducing engine coolant temperatures by as much as 25°F and providing unmatched protection against harmful buildup and corrosion in the cooling systems of cars, trucks, motorcycles, and powersports equipment.
Royal Purple: Purple Ice Cooling System Optimizer
Racing, towing, and day-to-day driving can strain today’s cooling systems—a vital yet often neglected system that is prone to overheating. As a wetting agent, Purple Ice helps lower engine coolant temperatures by reducing the surface tension of the coolant. This allows a better interface between the engine’s coolant and hot metal components, which enables the coolant to better pull heat away from the engine, helping prevent overheating as well as the formation of damaging engine hot spots.
Purple Ice is especially beneficial for performance racing applications where the use of conventional glycol-based coolants is not permitted. When added to water, its glycol-free formulation provides racers with advanced corrosion protection, enhanced heat transfer capabilities, and compliance with racetrack rules.
Unlike other similar products, Purple Ice is 100 percent water soluble and leaves behind no film or buildup. Royal Purple has designed Purple Ice to be compatible with all OEM and stock replacement coolants, including extended-life antifreezes, and can also be used with straight water for maximum cooling benefit. Plus, it won’t harm sensitive rubber seals and hoses.
Available in 12-ounce bottles (01600) and 12-bottle cases (12600).
Reduces engine coolant temperatures by as much as 25 degrees Fahrenheit.
Protects against harmful buildup and corrosion.
Ideal replacement for glycol-based coolants.
Won’t harm rubber seals and hoses.
Water-soluble formula leaves behind no film or buildup.
Compatible with all OEM and stock replacement coolants.
Built to spec for 2007–2016 four-door Jeep Wranglers, Tubular Safari Doors without Mirrors from Paramount Automotive offer exterior protection and visibility for those who like to cruise with the top down. Designed to squeeze even more open-air adventure from your JK, 51-0376 includes an adjustable striking mechanism for latch security when closed. The doors easily accept OEM hinges with no modifications required!
Made from durable 1/8” steel sheet and 1.25” x 0.08” steel tubing.
Satin black finish.
Mounts to factory door hinges.
Easy installation—no modification required!
Paramount Automotive (51-0376): Tubular Safari Doors for Wrangler JK 4-Door
