Category: Industry

BedRug: BedTred Ultra Bed Liner

David Ayers Leave a comment
Use This Post Clip for Email

The new BedTred Ultra system from BedRug is a four-piece zipped liner that installs with hook-and-loop fasteners to avoid damaging your truck bed. Similar to the material used in life preservers, this product’s 3/4”-thick foam is strong enough to resist battery acid, motor oil, and bleach. Plus, it won’t absorb water, helping it stay free of mold and mildew. The Ultra is ideal for hauling equipment for work or play, with a snug, custom, contoured fit that protects your entire truck bed. Fade-resistant design provides lasting good looks, while the foldable tailgate gap won’t crimp your style.

If you are looking for an ultra-tough bed liner that won’t damage your truck, isn’t permanent, and won’t lower your resale value, BedRug’s BedTred Ultra is for you!

Features

  • TPO composite surface provides superior dent protection.
  • Heavy-duty, 3/4” textured, anti-skid work surface.
  • Provides dent protection and a cushioned, knee-friendly surface.
  • Custom contoured for a tight fit.
  • No sanding or prepping required.
  • Quick and easy hook-and-loop installation.
  • Foldable tailgate gap hinge.
  • Limited lifetime warranty.
BedRug: BedTred Ultra Bed Liner
BedRug: BedTred Ultra Bed Liner

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Get a FREE Cargo Manager from Roll-N-Lock

David Ayers Leave a comment
Use This Post Clip for Email

With purchase of any Roll-N-Lock tonneau cover from August 1 to September 30, 2016, via mail-in offer. Click the image to go to a printable rebate form!

Roll-N-Lock Cargo Manager Offer
Roll-N-Lock Cargo Manager Offer

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Fastway FLASH™ Ball Mounts

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we take a closer look at the FLASH™ series of ball mounts from Fastway and show you the differences between the E-Series, Solid Tow, and Adjustable Locking series ball mounts

Parts used in this video:

Fastway FLASH™ E-Series Ball Mount (42-00-2600)

Fastway FLASH™ Solid Tow Ball Mount (DT-STBM6600)

Fastway FLASH™ Adjustable Locking Ball Mount (DT-ALBM6600)

Fastway FLASH™ Dual Lock Pack (86-00-3660)

Want to check out more about Fastway? http://www.performancecorner.com/index.php/manufacturer?id=48/

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Bushwacker (14015): Cowl Cover for 2007+ Wrangler JK/JKU

David Ayers Leave a comment
Use This Post Clip for Email

The 14015 Cowl Cover is the newest entry in Bushwacker’s Trail Armor series for Jeep Wrangler and Wrangler Unlimited. With its matte black textured finish, this Dura-Flex 2000 TPO cover goes on easily via double-sided automotive-grade 3M tape to prevent the dings and scratches that can come from side mirrors on overextended doors. Painted to match your ride’s color scheme, this product is made in America and backed by a limited lifetime warranty.

Features

  • Excellent solution for preventing/covering common JK mirror dents.
  • Can be painted to match.
  • Installs easily with 3M auto tape.
  • Constructed from tough Dura-Flex 2000 TPO.
  • Matte black textured finish.
  • Made in the USA.
  • Lifetime limited warranty.
Bushwacker (14015): Cowl Cover for 2007+ Wrangler JK/JKU
Bushwacker (14015): Cowl Cover for 2007+ Wrangler JK/JKU

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive: HDX Xtreme Running Boards

David Ayers Leave a comment
Use This Post Clip for Email

Upgrade your vehicle with a set of heavy-duty HDX Xtreme Boards from Westin Automotive. These patented boards include oversized step areas for easier entry/exit; solid one-piece construction; and a durable, textured powder-coated finish. Step locations are strategically placed to facilitate cab access while also complementing your truck’s profile.

Westin currently makes HDX Xtreme Running Boards for Canyon/Colorado, Silverado/Sierra, Ram, F-Series pickups, Wrangler, Tacoma, and Tundra applications.

Specifications

  • Oversized step areas for easier cab entry and exit.
  • Injection-molded polymer step pad.
  • Solid 1-piece construction.
  • Chiseled style complements HDX bumpers.
  • S. Patent No. 8,864,158.
  • Textured black powdercoat.
  • Mount kit included.
Westin Automotive: HDX Xtreme Running Boards
Westin Automotive: HDX Xtreme Running Boards

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley: Vintage Series Tall-Fin Valve Covers for GM LS Engines

David Ayers Leave a comment
Use This Post Clip for Email

Coming in September, the Vintage series of valve covers for LS engines leverage Holley’s existing tall LS valve covers, but with a finned design that eliminates the coil-on-cover look (remote coil-relocation solutions to coincide with launch). This change gives your engine bay a classic, retro look.

An extra 0.54” of internal clearance over factory-height valve covers allows for the taller dimensions and contributes to a more muscular profile. To accommodate its customers’ personal style, Holley is making four finishes available:

  • Natural Cast (ready for custom paint)
  • Polished
  • Lightly textured Satin Black
  • Chevy Orange

Vintage series valve covers are designed to fit LS1/2/3/6/7 engines, and they are packaged to install with an OE-style baffle and ventilation system, lengthened factory-style mounting hardware, and a billet aluminum oil fill cap. Holley encourages users to reuse or replace the flange gaskets specific to their applications.

Features

  • Eliminates coil-on-cover look.
  • Classic, vintage appeal with taller fins.
  • Four finishes available: Natural Cast, Polished, Satin Black, and Chevy Orange.
  • Coming in September!
Holley: Vintage Series Tall-Fin Valve Covers for GM LS Engines
Holley: Vintage Series Tall-Fin Valve Covers for GM LS Engines

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock (2052): Top End Kit for Hemi Gen II

David Ayers Leave a comment
Use This Post Clip for Email

The Top End Hemi Gen II Kit from Edelbrock is based on the popular Total Power package concept of combining dyno-matched components for dyno-tested and proven results. Edelbrock’s Power Package Top End Kits feature the best combination of high-quality performance components all in one box.

The 2052 Top End Kit for 426-572 Chrysler Hemi Gen II engines includes an Edelbrock Dual-Quad intake manifold, Victor Jr. cylinder heads, Rollin’ Thunder hydraulic roller camshaft, true roller timing chain, head bolts, and gasket set—everything you need for a complete installation.

Dyno testing of the 2052 produced 705 hp and 623 ft-lb of torque when matched with dual Performer series carburetors (#1405) on a 528 c.i.d. with 10:1 compression.

Features

  • Includes a Dual-Quad intake manifold (#7524), Victor Jr. cylinder heads (#61175), Rollin’ Thunder hydraulic camshaft (#2212), timing chain (#7805), head bolts (#8513), and head gasket set (#7349).
  • Rollin’ Thunder camshaft is designed for use with Chrysler 426-572 Hemi V8 engines.
  • Testing produced 705 hp and 623 ft-lb of torque on a 528 c.i.d. engine.
  • Made in the USA.
Edelbrock (2052): Top End Kit for Hemi Gen II
Edelbrock (2052): Top End Kit for Hemi Gen II

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Fastway e2™ Hitch

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we take a closer look at the e2™ Hitch from Fastway and see why you need sway control and weight distribution built in.

Parts used in this video:

Fastway e2™ Round Bar Hitch (94-00-1033)

>

Want to check out more about Fastway? http://www.performancecorner.com/index.php/manufacturer?id=48/

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive (56-13725): HDX Drop Step for ’16 Silverado/Sierra 1500

David Ayers Leave a comment
Use This Post Clip for Email

The new 56-13725 HDX Drop Step from Westin Automotive gives 2016 Chevy and GM 1500 owners the rugged look and functionality they crave. This product features solid one-piece steel construction and heavy-duty punch plates, which enhance traction for safer entry and exit.

Westin’s HDX Drop Steps also feature a notched bar design that allows for more than 2” of additional toe/heel placement over the competition. Available in a textured black finish that complements Westin Automotive HDX Bumpers, these drop steps are specifically designed to fit 2016 Silverado and Sierra 1500 pickups and include installation hardware and instructions.

Features

  • Die-stamped, slip-resistant, extra-wide step areas.
  • Fits tight to rocker panel.
  • Chiseled style complements HDX Bumpers.
  • Patented, bolt-on design.
  • Backed by a 3-year warranty.
Westin Automotive (56-13725): HDX Drop Step for ’16 Silverado/Sierra 1500
Westin Automotive (56-13725): HDX Drop Step for ’16 Silverado/Sierra 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino: BRJ40 Modular Front Bumper for ’07-’16 Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

Go Rhino is hitting the Jeep market in a big way, porting its signature BR Series bumper to the Jeep Wrangler platform (JK and JK Unlimited). The product’s six-point mounting system and no-cut, no-drill installation make it the easiest-on Jeep bumper on the market today.

You can customize the feature-rich, winch-ready BRJ40 with three optional end cap styles (Stubby, Straight, and Full) and three optional light mount bars (Trailline, Rockline, and Roadline)—combining to present 16 separate combinations to fit every taste and personality.

Features

  • Bumper made from 3/16” steel; brackets formed from 1/4” steel.
  • Stainless steel hardware.
  • Polymer rub plates protect bumper.
  • Compatible with factory fog lights.
  • 1” steel shackle mounts with signature Go Rhino horn design.
  • No cutting or vacuum canister relocation required.
  • Locking drawer codes to ignition key.
  • Accommodates up to 12,500-lb. capacity winches.
  • Textured black powder-coated finish.
  • 5-year warranty.
Go Rhino: BRJ40 Modular Front Bumper for ’07-’16 Wrangler JK
Go Rhino: BRJ40 Modular Front Bumper for ’07-’16 Wrangler JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.