Author: David Ayers

ReadyLIFT® Now Offers All-New 2020 GM HD Leveling & SST Lift Kit

David Ayers Leave a comment

ReadyLIFT® has engineered new leveling and SST lift kits specifically designed to go along with the updates to the long-standing torsion bar suspension on the all-new 2020 Chevy Silverado and GMC Sierra 2500/3500 HD trucks.

The new adjustable forged torsion key leveling kit system and new 3″ SST lift kit system from ReadyLIFT have been engineered to provide a comfortable ride and to allow for 35″ tires. Just keep in mind some trimming may be required with some tire styles on 20×9 0 offset – 35×12.50 or 325/60R20.

Every kit includes ReadyGuard Powertrain Warranty.

66-3020 – Adjustable Leveling Kit – GM Silverado/Sierra 2500/3500 HD

  • Includes front shock extensions, differential drop spacers and factory skid plate spacers.
  • Leveling lift is in the range of 2″, but the amount of actual lift required will depend on the vehicle.
  • This kit includes differential drop spacers to help maintain factory geometry and corrects CV axle angles.
  • 66-3020 works with trucks equipped with either the OE #84461807 or OE #84634344 factory torsion keys and requires ReadyLIFT torsion key unloading tool 66-7816A or similar for installation.

69-3030 – 3″F/2″R SST Lift Kit – GM Silverado/Sierra 2500/3500 HD

  • Provides 3″ of adjustable front lift
  • Features industry leading forged torsion keys specialized for this 3″ front lift (not the same keys found in 66-3020)
  • Taller differential drop spacers and skid plate spacers are included, as well as new taller bump stops, rear shock extensions and OE style cast iron 2″ tall rear lift blocks with new longer U-bolts
  • 69-3030 SST lift kit works with trucks equipped with either the OE #84461807 or OE #84634344 factory torsion keys and requires ReadyLIFT torsion key unloading tool 66-7816A or similar for installation.

Rugged Ridge (11640.51) Max Terrain Fender Flare Set, F & R; 18-20 JL/JLU

David Ayers Leave a comment

The Max Terrain Fender Flare set from Rugged Ridge is a play on the classics with a modern feel. Taking inspiration from some of Jeep’s earliest models, the Max Terrain Fender Flares blend the old school, flat-fender look with the refined construction of the JL factory fenders.

This sporty combination enhances your Jeep JL’s off-road capabilities to the max. The flares mount high-to-the-body of your Jeep, which gives you extra tire clearance for maximum suspension travel when off-roading. The rear mating surfaces are carefully contoured to help deter stones and debris from getting trapped or scratching painted surfaces.

Max Terrain Flares have a dual-textured finish that pairs well with the JL factory trim. Just like your Jeep, these flares can be customized to fit your desired paint or finish. The DRL tubes (or Daytime Running Lights) are cradled inside the front, highlighting and adding visual appeal while also bettering road visibility.

Durability isn’t a question with the Max Terrain Fender Flare Set. They are constructed from a durable, injection-molded thermoplastic. Rugged Ridge chose this material because of its flexibility and impact-resistant qualities. Installation is simplified with the included hardware and requires no drilling.

This Front and Rear Max Terrain fender flare kit from Rugged Ridge fits 18-20 Jeep Wrangler JL/JLU

  • Flat fender look with modern JL style
  • Durable, injection-molded thermoplastic construction
  • Fits high-to-the-body, maximizing off-roading capabilities
  • Rear mating surfaces contoured to help with stones and debris getting trapped + protect painted surfaces
  • Dual-textured finish that matches well with JL factory trim
  • Simplified installation with included hardware + no drilling required

Luverne (415088 – 401530) Grip Step 7″ Wheel-to-Wheel Running Boards

David Ayers Leave a comment

Work smarter and safer with the fleet-approved Grip Step™ wheel-to-wheel running boards from LUVERNE. The Grip Steps™ feature a 7″ wide stepping surface, providing you a safe entry and exit of the vehicle while also giving additional stepping space for reaching into the truck bed.

Another perk of the Grip Steps™ is the open tread design, which knocks dirt, mud, and snow off your boots–keeping the inside of your vehicle nice and clean. These treads also give you more reliable traction, even with rainy or muddy conditions at the job site.

These Grip Step™ running boards are made from light weight, rust resistant, powder-coated aluminum giving them the upper hand in any work setting. Grip Step™ aluminum running boards are equipped with hardened plastic end caps to add further protection against the jobsite.

Grip Step™ wheel-to-wheel running boards from LUVERNE are easy to install with vehicle-specific mounting brackets. The powder-coated brackets use stainless steel fasteners for secure board attachment. Optional black aluminum backsplash available for 78″ (410078) or 88″ (410088).

Grip Steps™ have a limited lifetime warranty of five-year finish and one year parts. They are proudly made in the USA.

  • 7″ wide stepping surface provides safe, comfortable entry and exit
  • Fleet-approved, expanded metal treads for maximum traction and safety
  • Extra wheel-to-wheel length for easier access when reaching into the truck bed
  • Durable, textured black powder coat for a sleek, professional finish
  • Smooth, rounded end caps eliminate sharp corners
  • Easy installation with vehicle-specific mounting brackets
  • Limited lifetime warranty (five-year finish, one-year parts)
  • Made in USA

Go Rhino (730500T): XE Series Windshield Light Bar Mount for Jeep JL and JT

David Ayers Leave a comment

Now shipping, the XE Series windshield light bar mount from Go Rhino lets Wrangler JL and Gladiator JT owners add double- or single-row 50” LED light bars to the front of their rigs. The 730500T windshield light mount features a low-profile design and heavy-duty uprights for dependable, stylish performance. Using the included black geomet-coated hardware, the XE Series mounts directly to your Jeep’s A-pillar and cowl mounts (no drilling required) and is compatible with Go Rhino’s exterior jack mount (PN 701001T) and the factory antenna. Protected by a textured-black powdercoat and a five-year limited warranty.

Features

  • For Jeep Wrangler JL and Gladiator JT
  • Allows for the mounting of a single- or double-row 50” LED light bar
  • Low-profile, heavy-duty uprights
  • Mounts to A-pillar and cowl mounts with no drilling
  • Textured-black powdercoat and black geomet-coated hardware
  • Compatible with Go Rhino 701001T (exterior jack mount) and the factory antenna
  • Warranty: 5-year limited