Month: January 2018

Dee Zee: Combo Auxiliary Tank – BlackTread

David Ayers Leave a comment
Use This Post Clip for Email

Designed to save you time and make your work day more efficient, combo auxiliary tanks from Dee Zee are tested and certified to store tools of your trade in addition to holding diesel fuel for refueling at the job site or for transferring directly to your truck’s fuel tank on longer drives.

Manufactured from nonrusting 0.125 Brite-Tread aluminum, this tank is covered with a protective black powdercoat and features a radius curve design to eliminate key weld pressure points. It also meets federal DOT and Federal Motor Carrier Safety Administration requirements to operate as an auxiliary fuel system. Holds 50 gallons.

Features

  • Black powder-coated 0.125 Brite-Tread aluminum.
  • Radius curve eliminates weld pressure points.
  • Includes coupler for venting and dual-threaded bungs.
  • Compatible with center-mounted transfer pumps (larger pumps require bracing).
  • Hydrostatically pressure tested to 29 PSI.
  • Standard 0.375” drain plug.
  • Mounting tabs secure to the truck bed.
  • Meets Federal Motor Carrier Safety Administration requirements for diesel auxiliary tanks.
  • Meets Federal DOT requirements for UN31A and UN31B tanks.
  • Made in the USA.
  • Volume: 50 gallons.
  • Warranty: limited lifetime.

Dee Zee Combo Auxiliary Fuel Tank

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT Industrial Duty Forged Ball Bount 45430

CURT (45430): Industrial-Duty Forged Ball Mount

David Ayers Leave a comment
Use This Post Clip for Email

Rigorously tested at CURT’s Detroit engineering facility, this forged-steel industrial ball mount with powerful I-beam shank boasts ratings of 21,000 lb. gross trailer weight and 2,800 lb. tongue weight, making it the ideal complement to 3” x 3” trailer hitches.

CURT built the 45430 mount to outlast the elements, giving it a durable carbide black powdercoat to resist rust, scratches, and chipping. This particular ball mount also comes with a 1-1/4” trailer ball hole and a 2” rise and 4” drop to accommodate larger pickup trucks and facilitate a more level ride.

Features

  • Fits trailer hitches with a 3” x 3” receiver tube opening.
  • Tested and rated to 21,000 lb. GTW and 2,800 lb. TW.
  • Constructed from solid forged steel for superior strength.
  • 1-1/4” hole accepts a trailer ball shank.
  • 2” rise / 4” drop for use with larger trucks.
  • Durable carbide powder-coated finish.
  • Warranty: limited lifetime.

CURT Industrial Duty Forged Ball Bount 45430

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker BlackHeart: 304 SS Long-Tube Headers for ’79-’93 Ford Mustang LS Swap

David Ayers Leave a comment
Use This Post Clip for Email

Doing an LS swap for your 1979–1993 Ford Mustang with Fox body? Hooker BlackHeart has your long-tube headers, which provide excellent ground and component clearance and are designed specifically to work with Hooker BlackHeart transmission crossmembers and engine mounts for a trouble-free installation. Constructed from 18-gauge, mandrel-bend 304 stainless steel for maximum strength and durability and backed by a limited lifetime warranty. All hardware included. Ask for part number 70101350-RHKR.

Features

  • Lightweight, 18-gauge, mandrel-bent stainless steel.
  • 1-7/8” primary tubes and long-transition 3” collectors with merge spears for maximum flow and increased exhaust velocity.
  • 3/8” thick, CNC-waterjet header flanges for strength and maximum sealing surface.
  • Compatible with stock or multiple validated aftermarket engine K-members.
  • Compatible with the stock steering shaft/rag joint coupler (stock K-member only) and aftermarket steering shafts.
  • Designed to work specifically with Hooker BlackHeart transmission crossmembers and engine mounts.
  • Hand-welded construction for strength, longevity, and good looks.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart Long Tube Headers for Mustang LS Swap 70101350-RHKR

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: WESTiN HDX Front & Rear Bumpers

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the HDX Front & Rear Bumpers and Off-Road Series Waterproof Winch from WESTiN Automotive on a 2016 Ford F-150 XLT.

Parts used and referenced in this video:

HDX Front Bumper (58-141515NW)

HDX Rear Bumper (58-241505S)

HDX Pre Runner Bull Bar (58-95-0015)

Off-Road Series Waterproof Winch (47-2106)

Want to check out more about WESTiN Automotive?
https://www.performancecorner.com/manufacturer/westin-automotive

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Air Lift: Get Up to a $150 Rebate on On-Board Compressors and Air Spring Kits

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in rebate. Get $75 back on on-board air compressor systems or air spring kits that you purchase from a professional installer and have them install (or $150 for both). Qualifying purchases must be made January 1 to April 30, 2018. Click image for complete details!

 

Air Lift 150 Winter Rebate 2018

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

UWS: Get a $50 Prepaid Card on Secure Lock Crossover Toolbox Purchases

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer valid January 1 to February 28, 2018. Click image for printable form and complete details!

 

UWS 50 Card on Secure Lock Toolboxes

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

T-Rex Grilles: Get Up to a $50 Rebate on Qualifying Grille Purchases

David Ayers Leave a comment
Use This Post Clip for Email

Via online or mail-in form. Get $25 back on X-Metal or ZROADZ grilles or $50 back on Torch or Revolver grilles. Qualifying purchases must be made January 1–31, 2018. Click image for complete details!

 

T-Rex Grilles 50 or 25 Back on Grilles

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Mr. Gasket: Valve Covers for AMC/Jeep

David Ayers Leave a comment
Use This Post Clip for Email

Available in Chrome or EDP Black, these reasonably priced Mr. Gasket valve covers for AMC/Jeep V8 (and inline V6) engines are perfect for an upgrade in appearance or as a replacement of stock components. Their quality stamped-steel construction is tough enough to handle any application.

But before we get into the features, a word about EDP. EDP—or electrophoretic deposition— is a finishing process by which metal parts are electrically charged and then dipped in an opposite-charged paint solution. This sequence attracts the paint to the metal to achieve total part coverage with excellent corrosion resistance while also creating a smooth and nonporous layer of paint. EDP coats look great as they are, but you can also further paint or powder coat them as you desire.

Choose from two sets of part numbers:

9830BMRG (EDP Black) and 9830CMRG (Chrome)

  • For 1968–1979 AMC/Jeep V8.
  • Perimeter-style top bolt pattern.
  • Smooth top design.
  • Sold in pairs.

9831BMRG (EDP Black) and 9831CMRG (Chrome)

  • For 1964–1988 AMC/Jeep inline V6.
  • Perimeter-style top bolt pattern.
  • Smooth top design.

Mr. Gasket Valve Covers for AMC Jeep

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Putco (12018): Luminix Tail Lamps for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Boasting an industry-first scanning turn signal and market-leading (1,200 lumens!) brightness for Jeep tail lights, Luminix tail lamps for Wrangler from Putco pair perfectly with the company’s Luminix head lamps. The 12018 lamps feature chip-on-board (COB) LEDs and a two-year warranty.

Features

  • For Jeep Wrangler.
  • Industry-leading tail light brightness (1,200 lumens).
  • Industry-first scanning turning signal.
  • Match for Luminix head lamps.
  • Warranty: 2 years.

Putco Luminix Tail Lamps for Jeep

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: Radiance Plus Curved Light Bar

David Ayers Leave a comment
Use This Post Clip for Email

Now available in a curved version, the Radiance Plus light bar from RIGID Industries features improved LED technology for more light output at a level everyone can attain. These bars offer a black exposed printed circuit board and optimized forward-projecting Broad Spot optics that combine the best of spot and flood beam patterns, along with available white, amber, red, blue, or green backlighting and an exclusive Multi-Trigger harness developed specifically for the Radiance Plus line.

Available in lengths from 20” to 54”, the new curved Radiance Plus delivers a truly custom look.

Features

  • 9–15 V DC.
  • High-grade aluminum-alloy housing and heat sink.
  • Dedicated wire to run backlighting without primary LEDs.
  • Multi-Switch wiring harness included.
  • High-impact polycarbonate lenses and GORE pressure-equalizing vent.
  • IP68 rating against water and dust.
  • Black powder-coated mounting brackets.

RIGID Industries Radiance Plus Curved Light Bar Amber

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.