Month: October 2017

Energy Suspension (4.1137): Polyurethane Motor and Transmission Mount Set for Early Small-Block V8 Ford

David Ayers Leave a comment
Use This Post Clip for Email

Energy Suspension has just what you need to stabilize your Ford or Lincoln drivetrain and experience power-to-the-ground performance: its 4.1137 polyurethane motor and transmission mounts. These durable mounts are more compliant than solid mounts and help prevent costly drivetrain damage by stabilizing your engine and transmission. The race-proven, driver-friendly Hyper-Flex polyurethane is mounted between zinc-plated metal brackets to outlast and outperform OE rubber replacement mounts. Change in NVH may occur. Available in Red and Black.

Application List

  • 1964–1970 Ford Fairlane
  • 1966–1970 Ford Falcon
  • 1967–1972 Ford Mustang
  • 1966–1971 Ford Ranchero
  • 1968–1971 Ford Torino
  • 1966–1967 Mercury Comet
  • 1967–1972 Mercury Cougar
  • 1969–1973 Mercury Montego

Energy Suspension Polyurethane Motor and Transmission Mount Set for Early SB Ford

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock Pro-Flow 3 EFI 3220

Edelbrock (3220): Pro-Flo 3 EFI for 1986-and-Earlier Small-Block Chevy with Standard Heads

David Ayers Leave a comment
Use This Post Clip for Email

The Satin-finished, sequential-port 3220 Pro-Flo 3 EFI system from Edelbrock gives you the performance and look of true fuel injection without the complexity of tuning calibrations and related tables.

The key to the system is the free E-Tuner Android app that uses a Bluetooth connection to communicate with the ECU to continually adjust calibration for maximum performance—no laptop required. The E-Tuner app also contains dyno-tuned base calibrations for your specific application to simplify getting up to speed. Plus, it allows you to control both fuel and spark without pulling over. You’ll enjoy comprehensive control of your system while driving, with the ability to adjust air-fuel ratio, ignition curve, idle speed, acceleration fuel, coolant fans, rev limiter, and more! Includes 7” tablet.

Features

  • Standard head kit for 1986-and-earlier SBC.
  • Ready to run out of the box.
  • Converting to EFI will increase your engine’s performance and gas mileage.
  • No laptop tuning required—automatic system calibration while driving.
  • Capable of direct driving an ignition coil—no CDI box required.
  • Industry-leading dedicated support staff to answer your questions.

Edelbrock Pro-Flow 3 EFI 3220

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Husky Liners (52741): X-act Contour Floor Liners for ’14-’17 Sierra/Silverado Standard Cab

David Ayers Leave a comment
Use This Post Clip for Email

Punch it, slap it, flick it, kick it: X-act Contour floor liners from Husky Liners perfectly match the contours of your truck or SUV, combining indestructible strength with a soft, comfortable cushion. Add to that a premium look and some truly exclusive features, and you’ve got liner gold. Feel it for yourself!

Features

  • Fit 2014–2017 Sierra/Silverado 1500, plus 2015–2017 2500/3500 HD (all standard cab).
  • Tough, durable patented rubberized material resists most chemicals.
  • Patented Form-fit Edge provides a finished look.
  • Flexible, comfortable material prevents stains and soiling.
  • Stay-put Cleats help prevent shifting.
  • Made in the USA.
  • Warranty: No-Hassle Lifetime.

Husky Liners X-act Contour Floor Liners for Sierra and Silverado 52741

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge (11615.20): XHD Rear Corner Guards for Jeep Wrangler JKU

David Ayers Leave a comment
Use This Post Clip for Email

“An ounce of prevention is worth a pound of cure” is the name of the game when it comes to trail armor. Finding out how vulnerable your JKU’s rear corners are by smashing your taillight into a tree is more than enough to ruin your weekend—and your wallet.

XHD Corner Guards from Rugged Ridge are built to protect your factory sheet metal from threats on and off-road. This product is tooled from super-strong 3mm-thick steel plate and molded to match the contours of your Jeep. On top of that is a heavy-duty textured black powdercoat that resists rocks, rust, and corrosion.

Even better, unlike a lot of the competition, 11615.20 XHD Corner Guards fully surround your JKU’s taillights, defending against direct impacts that might crush lesser corner armor. Also available for JK (11615.21).

Features

  • Fits Wrangler JK four-door.
  • Constructed from 3mm-thick steel plate with a textured black powdercoat.
  • Fully surround taillights for complete protection.
  • Installation: 1+ hours.
  • Warranty: 5-year limited.

Rugged Ridge XHD Rear Corner Guard for Wrangler Unlimited

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

AAM GROUP PARTNERS WITH GREG GRIFFITH AND MANCAVE DESIGNS IN 2017 SEMA PROJECT VEHICLE: RENEGADE III

David Ayers Leave a comment
Use This Post Clip for Email

Renegade III Greg Griffith AAM Group

October 26, 2017 (JOHNSON CITY, Tenn.) — The AAM Group™, the largest program distribution group in the SEMA marketplace, is jointly announcing the 2017 SEMA project vehicle Renegade III: a 1974 Jeep CJ-5 that has been taken to the ground and reconstructed with modern enhancements any 1970s owner would have loved. Renegade III is being outfitted by the biggest names in the automotive aftermarket—most of them sponsoring manufacturers of the Performance Corner® jobber marketing program. The Jeep will make its exhibition debut at the SEMA Show in Booth SL08 in the South Hall, Lower Level.

Renegade III was conceived, designed, and managed by AAM Program Sales Manager Greg Griffith and built by the Mancave Designs team. In addition to the modern upgrades, OE enhancements, and custom touches, the Jeep includes several “Hidden Mickeys”: Mickey Mouse silhouettes placed throughout the build. Griffith originally bought the Jeep as a modest cruiser for his wife, a former Disney cast member and enthusiastic fan, and Renegade III exists as both a salute to her and a one-of-a-kind vehicle that brings together two iconic brands.

“One of the best things about this project was that it allowed us to include both our truck and performance manufacturers on one build,” said Griffith. “The support they gave us was simply outstanding. This build should have taken four years under normal circumstances, but our team pulled it together in just over nine months. I am very proud of this Jeep, as she continues our tradition of bringing unique looks and stances to SEMA—plus, blending old with new and showcasing some really crafty parts.”

Performance Corner® Sponsors

AutoMeter Products, Bestop, CURT, Driven Racing Oil, Edelbrock, Flex-a-lite, Flowmaster, Husky Liners, Motive Gear, MSD Performance, Omix-ADA, OPTIMA Batteries, Powermaster, Rancho, Scorpion Protective Coatings, TEN Factory, Vision X, and WARN.

Additional Sponsors

BFGoodrich, Clifford Performance, Harland Sharp, Hi-Lift, Kicker, Painless, Raceline Wheels, SPIDERWEBSHADE, Straub Technologies, and Tuffy.

Custom Services

James Belcher and Mancave Designs

Lift Services

Joey Yokum at Atomic City 4×4 in Oak Ridge, Tenn. 865-481-8006

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Capital One Spark: Get Cash-Back Rewards

David Ayers Leave a comment
Use This Post Clip for Email

Performance Corner® has teamed up with Capital One® Spark Business® to bring you the Spark® Cash credit card, which can allow you to earn unlimited 2% cash back on purchases for equipment, parts, advertising, and everything in between. Start putting thousands of dollars back into your business today! Plus, earn a one-time $500 cash bonus when you spend $4,500 on purchases within three months of account opening*.

Learn more.

*Existing or previous Spark® cardholders may not be eligible for this one-time bonus.

Capital One Spark Credit Card Offer

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

T-Rex Grilles: Win a Free X-Metal Grille with a SEMA Photo

David Ayers Leave a comment
Use This Post Clip for Email

If you’ll be at the SEMA Show this year, T-Rex Grilles is giving you a chance to win a FREE X-Metal grille. Just take a picture of any vehicle with a T-Rex grille anywhere in Las Vegas for the duration of the show (October 31 to November 3, 2017). It can be at SEMA itself, on the strip, or even the parking lot of your favorite restaurant. Then post the photo on social media using the hashtags #trexsema2017 and #trexgrilles. The winner will be randomly selected and announced November 15 on the T-Rex Instagram page. Click the photo below for complete details!

T-Rex SEMA X-Metal Grille Contest

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: UnderCover NightHawk Light Brow

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome back Michael McLaughlin from UnderCover and install their NightHawk Light Brow on a 2016 Jeep Wrangler.

Parts used in this video:

NightHawk Light Brow, Granite Crystal Finish (NH1001-PAU)

Want to check out more about UnderCover?
https://www.performancecorner.com/manufacturer/undercover

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES: (2070450): Roof Cargo Brackets for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Roof cargo brackets from ARIES are a terrific way to add storage space to the top of your Jeep Wrangler. They go on with no-drill, quick-release clamps, and are made from welded steel reinforced with a durable black powdercoat to keep them off-road ready.

Full-width slotted channels give the 2070450 versatile attachment points for cargo carriers or straps to keep items stowed on top of your Wrangler, while the quick-release latches allow the brackets to be removed in seconds when not wanted.

Features

  • For Jeep Wrangler.
  • Mount roof cargo baskets.
  • Full-width slotted channels for adjustable positioning.
  • Quick-release gutter clamps.
  • No-drill installation.
  • Welded steel with a carbide black powdercoat.
  • Includes two brackets and mounting hardware.
  • Warranty: 3 years on finish and 5 years against defects.

ARIES Roof Cargo Brackets for Jeep Wrangler 2070450

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino: BR5.5 Front Replacement Bumper

David Ayers Leave a comment
Use This Post Clip for Email

The winch-ready, heavy-duty BR5.5 front replacement bumper from Go Rhino is laser measured and designed in 3D CAD to fit the contours of your truck. Its two-piece steel design holds winches rated up to 12,500 pounds, with a winch tray and mounting brackets constructed from 1/4” steel.

The BR5.5 includes a hidden, integrated 2″ receiver hitch mount; integrated light ports; optional patented light bar mount; and patented Rhino Horn tow hook and D-ring shackle mounts that are welded directly to the winch tray for extra strength. Not compatible with Driver Alert package.

Features

  • Winch tray accommodates most winches up to 12.5K.
  • Hinged steel mesh winch cover.
  • Front-facing 2” receiver.
  • Patented Rhino Horn tow hook and shackle mount.
  • Optional light plates.
  • Framed mesh vent covers for improved air flow.
  • Textured black powdercoat.
  • Warranty: 5 year limited.

Go Rhino BR5.5 Front Replacement Bumper for Chevy Silverado 1500

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.