Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we welcome Dana Mitchell from Scorpion Truck Bed Liners to install a X02 Truck Bed Liner Kit on a 2015 Ram 1500.
Parts used in this video:
Scorpion X02 2 Gallon Truck Bed Liner Kit
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
In the Garage with Performance Corner: Scorpion Truck Bed Liner
In the Garage with Performance Corner: Scorpion Truck Bed Liner
Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we welcome Dana Mitchell from Scorpion Truck Bed Liners to install a X02 Truck Bed Liner Kit on a 2...
Extreme performance and extreme durability. That’s what Pro Series billet fuel pumps from Quick Fuel Technology are all about. Built for the most demanding drag racing applications, this 427-gph High-Output Electric Fuel Pump features hard anodized billet aluminum housings, a rugged six-vane pump, and epoxy-coated armatures to secure windings and extend motor life.
The pump base is integrated as the bottom end cap of the motor, promoting better pump sealing and shaft alignment. An integrated adjustable bypass valve eliminates pump cavitation and stabilizes fuel flow, while stainless steel armatures enhance corrosion resistance. Compatible with gasoline, E85, and alcohol fuels.
427 gph flow and 11.7 amp draw at 25 psi.
Supports 800–2,500 hp.
Designed for drag race and other short-duration competitions.
1/8” NPT gauge port.
Efficient 6-vane design.
Hard-coated anodized billet aluminum housing.
#10 AN inlets and outlets; #8 AN bypass port.
Lower pump body is machined with a bearing pocket to receive the motor shaft bearing, improving shaft alignment, reducing current draw, and improving flow.
Upper wear plate is integrated into the one-piece eccentric bushing for reduced friction.
Compatible with all fuels.
Flow-, pressure-, and leak-tested prior to shipment.
Quick Fuel Technology (30-427): 425-GPH High-Output Electric Fuel Pump
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Quick Fuel Technology (30-427): 427-GPH High-Output Electric Fuel Pump
Quick Fuel Technology (30-427): 427-GPH High-Output Electric Fuel Pump
Extreme performance and extreme durability. That’s what Pro Series billet fuel pumps from Quick Fuel Technology are all about. Built for the most demanding drag racing applications, this 427-gph High-Output Electric Fuel Pump features hard anod...
Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).
Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.
Fits ’14–’15 C7 Corvette.
3” 18-gauge stainless steel construction.
4” twin-wall polished tips.
Straight-through, high-flow performance.
3” bypass valve utilizes factory NPP actuator.
Retains all factory catalytic converters (cutting required).
Siamese X-pipe for increased scavenging.
Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
Installation via factory mounting points.
Optimal tube geometry.
Quality welds.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value i...
Add utility to your truck bed with these aluminum tie downs from Dee Zee. DZ97909 are designed for and rated to the 2015–2016 Ford F-150’s maximum bed strength. Sold in pairs and protected by a black powdercoat, these tie downs go on with no drilling, with all mounting hardware and gaskets included. Dee Zee tie downs are a quick and easy way to add cargo-securing anchor points!
Tie-down anchors for cargo.
Cast aluminum construction.
Black powder-coated finish.
Sold in pairs.
Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150
Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150
Add utility to your truck bed with these aluminum tie downs from Dee Zee. DZ97909 are designed for and rated to the 2015–2016 Ford F-150’s maximum bed strength. Sold in pairs and protected by a black powdercoat, these tie downs go on with no dril...
<table class="row row-white row-bottom-border" style="background-color: #ffffff; border-bottom: 1px solid #969696; padding: 0px; width: 100%; max-width: 580px !important; position: relative; display: block; margin: 0 auto;">
<tbody style="display: block;">
<tr class="media-wrapper">
<td class="full">
<table class="four columns" style="margin: 0 auto;">
<tr>
<td style="padding-top: 10px; padding-right: 15px; padding-bottom: 10px; padding-left: 15px;">
<a href="https://performancecorner.com/blog/dee-zee-dz97909-tie-downs-for-15-16-ford-f-150/">
<img title="Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150" src="https://www.performancecorner.com/blog/wp-content/uploads/2016/03/Dee-Zee-Tie-Downs-DZ97909.jpg" alt="Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150" width="200" height="112" class="full-img left" />
</a>
</td>
<td class="expander">
</td>
</tr>
</table>
</td>
<td class="full cell1">
<table class="eight columns" style="margin: 0 auto;">
<tr>
<td style="padding-top: 10px; padding-right: 15px; padding-bottom: 10px; padding-left: 15px;">
<h4 style="font-size: 28px; font-weight: 300; margin: 0;">Dee Zee (DZ97909): Tie Downs for ’15–’16 Ford F-150</h4>
<p>Add utility to your truck bed with these aluminum tie downs from Dee Zee. DZ97909 are designed for and rated to the 2015–2016 Ford F-150’s maximum bed strength. Sold in pairs and protected by a black powdercoat, these tie downs go on with no dril...</p>
<p>
<a href="https://performancecorner.com/blog/dee-zee-dz97909-tie-downs-for-15-16-ford-f-150/" target="_blank">Read More »</a>
</p>
</td>
<td class="expander">
</td>
</tr>
</table>
</td>
</tr>
</tbody>
</table>
Summer can’t get here soon enough! The Sunrider® for Hardtop from Bestop lets in sun and air as an all-purpose, all-weather, all-season replacement for bulky factory Freedom Panels—without ever requiring you to leave the front seat of your Jeep.
Bestop: Sunrider for Hardtop for ’07–’16 Jeep Wrangler
Made for 2- and 4-door JKs, Sunrider for Hardtop employs a unique frame design that you can fold back for open-air driving or pull forward and latch to your windshield header like original panels—from inside the cab. This first-of-its-kind product goes on quick and easy (30 minutes or less), with no drilling required, and is available in black twill (52450-17) or black diamond sailcloth (52450-35).
The Sunrider for Hardtop is the reason you said “yes” to driving a Jeep in the first place. Coming from Bestop this spring!
Fits ’07–’16 Jeep Wranglers, 2 and 4 door.
Folds up or down for on-the-spot changes.
Goes on with no drilling in half an hour or less.
Available in black twill and black diamond sailcloth.
Bestop: Sunrider for Hardtop for ’07–’16 Jeep WranglerBestop: Sunrider for Hardtop for ’07–’16 Jeep Wrangler
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Bestop: Sunrider for Hardtop for ’07–’16 Jeep Wrangler
Bestop: Sunrider for Hardtop for ’07–’16 Jeep Wrangler
Summer can’t get here soon enough! The Sunrider® for Hardtop from Bestop lets in sun and air as an all-purpose, all-weather, all-season replacement for bulky factory Freedom Panels—without ever requiring you to leave the front seat of your Jeep....
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.
In this video, we take a closer look at the following from Vision X:
Vision X 6.7″ Light Cannon 2 Light Kit (CTL-CPZ610KIT)
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
NSF1 Project Jeep Part 12: Vision X Light Cannons
NSF1 Project Jeep Part 12: Vision X Light Cannons
NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the install...
Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Quick Fuel’s very own Mark Wells goes over what they will be bringing to the carburetor game in 2016. Be on the lookout for more videos from this series over the coming weeks.
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
2015 PRI Show – Quick Fuel
2015 PRI Show – Quick Fuel
Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Quick Fuel’s very own Mark Wells goes over what they will be bringing to the carburetor game in ...
<table class="row row-white row-bottom-border" style="background-color: #ffffff; border-bottom: 1px solid #969696; padding: 0px; width: 100%; max-width: 580px !important; position: relative; display: block; margin: 0 auto;">
<tbody style="display: block;">
<tr class="media-wrapper">
<td class="full">
<table class="four columns" style="margin: 0 auto;">
<tr>
<td style="padding-top: 10px; padding-right: 15px; padding-bottom: 10px; padding-left: 15px;">
<a href="https://performancecorner.com/blog/2015-pri-show-quick-fuel/">
<img title="2015 PRI Show – Quick Fuel" src="https://img.youtube.com/vi/Sq0FS-C2tx4/mqdefault.jpg" alt="2015 PRI Show – Quick Fuel" width="200" height="112" class="full-img left" />
</a>
</td>
<td class="expander">
</td>
</tr>
</table>
</td>
<td class="full cell1">
<table class="eight columns" style="margin: 0 auto;">
<tr>
<td style="padding-top: 10px; padding-right: 15px; padding-bottom: 10px; padding-left: 15px;">
<h4 style="font-size: 28px; font-weight: 300; margin: 0;">2015 PRI Show – Quick Fuel</h4>
<p>Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Quick Fuel’s very own Mark Wells goes over what they will be bringing to the carburetor game in ...</p>
<p>
<a href="https://performancecorner.com/blog/2015-pri-show-quick-fuel/" target="_blank">Read More »</a>
</p>
</td>
<td class="expander">
</td>
</tr>
</table>
</td>
</tr>
</tbody>
</table>
Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.
The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.
5” 18-gauge stainless steel construction.
4” dual-wall polished tips.
Straight-through, high-flow performance.
Installation via factory mounting points.
Optimal tube geometry.
Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. ...
The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torque at the real wheels. That’s an extra 140 horsepower and 124 foot-pounds of torque!
These E-Force Superchargers are designed to work with all OEM emissions equipment, which will make them 50-state emissions legal (EO number pending). Combined with great looks (black powder-coated supercharger assembly and bright-red coil covers) and an incredible 3-year/36,000-mile warranty, that makes these systems a great choice for your daily driver.
Enthusiasts will appreciate the Eaton 2300 TVS rotor assembly, air-to-water twin intercooler system, and dual pass heat exchanger. Edelbrock has fine-tuned the performance via a unique runner design and an integrated bypass value, which help reduce parasitic loss under light throttle—thus improving potential fuel efficiency. And it all goes under the hood without any modification!
Stage 1 Street systems for manual (1559) and automatic (1558) ’16 SS Camaros.
Designed to work with OEM emissions equipment (EO number pending).
Black powder-coated supercharger assembly.
Bright red coil covers.
Eaton 2300 TVS rotor assembly.
No under-hood modification.
3-year/36,000-mile warranty.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
Edelbrock: E-Force Supercharger System for 2016 Camaro SS
The new E-Force Supercharger from Edelbrock is a Stage 1 Street system that provides more horsepower and torque for your 2016 Chevy Camaro SS (auto: #1558, manual: #1559). How much more? The 1559 puts stock power up to 580 hp and 548 ft.-lb. of torqu...
Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Pertronix’s very own Greg Raymond goes over their new line of starters. Be on the lookout for more videos from this series over the coming weeks.
Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!
Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.
2015 PRI Show – Pertronix
2015 PRI Show – Pertronix
Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Pertronix’s very own Greg Raymond goes over their new line of starters. Be on the lookout for mo...
<table class="row row-white row-bottom-border" style="background-color: #ffffff; border-bottom: 1px solid #969696; padding: 0px; width: 100%; max-width: 580px !important; position: relative; display: block; margin: 0 auto;">
<tbody style="display: block;">
<tr class="media-wrapper">
<td class="full">
<table class="four columns" style="margin: 0 auto;">
<tr>
<td style="padding-top: 10px; padding-right: 15px; padding-bottom: 10px; padding-left: 15px;">
<a href="https://performancecorner.com/blog/2015-pri-show-pertronix/">
<img title="2015 PRI Show – Pertronix" src="https://img.youtube.com/vi/wUGjGsbNwEE/mqdefault.jpg" alt="2015 PRI Show – Pertronix" width="200" height="112" class="full-img left" />
</a>
</td>
<td class="expander">
</td>
</tr>
</table>
</td>
<td class="full cell1">
<table class="eight columns" style="margin: 0 auto;">
<tr>
<td style="padding-top: 10px; padding-right: 15px; padding-bottom: 10px; padding-left: 15px;">
<h4 style="font-size: 28px; font-weight: 300; margin: 0;">2015 PRI Show – Pertronix</h4>
<p>Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Pertronix’s very own Greg Raymond goes over their new line of starters. Be on the lookout for mo...</p>
<p>
<a href="https://performancecorner.com/blog/2015-pri-show-pertronix/" target="_blank">Read More »</a>
</p>
</td>
<td class="expander">
</td>
</tr>
</table>
</td>
</tr>
</tbody>
</table>
Share This Post!