Tag: off-road

WESTiN Automotive: Off-Road Series Waterproof Winches

John Arnaud Leave a comment
Use This Post Clip for Email

Pull your weight with a universal-fit, IP67 waterproof-rated Off-Road series winch from WESTiN Automotive, available in two line-pull options (9.5K or 12.5K) and two rope-type options (steel or synthetic). The overall dimensions (22” x 6.3” x 8.1”) are compatible with a wide variety of applications, but you should always ensure fit and options before purchase. These winches include a corded controller; 6.6 HP, 12V series-wound motor; and a black finish.

Features

  • Waterproof rating: IP67.
  • Size: 22” x 6.3” x 8.1”.
  • Rope: steel or synthetic.
  • Line pull options: 9,500 lb. and 12,500 lb.
  • Motor: 6.6 HP 12V series wound.
  • Finish: Black.
  • Corded controller included

WESTiN Automotive Off-Road Series Waterproof Winch

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Snyper WESTiN Offroad: Rock Slider Steps for Jeep

John Arnaud Leave a comment
Use This Post Clip for Email

Rock Slider Steps from Snyper WESTiN Offroad mount snug to your Jeep’s rocker panel, protecting it from off-road hazards while providing maximum ground clearance. The step areas achieve tremendous traction thanks to non-skid step plates enhanced by heavy-textured epoxy. They also feature two off-road jack points per side and are available for two- and four-door applications.

Features

  • Protects Jeep rocker panels from off-road hazards with minimal protrusion.
  • Mounts snug to body/vehicle rocker panel (drilling required).
  • 7-gauge textured-black steel.
  • Black-plated stainless steel upper exposed hardware.
  • Heavy-textured epoxy non-skid area for maximum traction.
  • Removable, easy-to-clean skid plates.
  • Two off-road jack points per side.
  • Available for 2- and 4-door applications.
  • Warranty: 1 year (finish); limited lifetime (material).

Westin Snyper Offroad Rock Slider Steps

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Vision X (9893365): 4.5” Light Cannon XP

Vision X (9893365): 4.5” Light Cannon XP

John Arnaud Leave a comment
Use This Post Clip for Email

The new 4.5″ Light Cannon XP from Vision X features a single 40-watt LED (over the standard 25-watt Cannon) for added power output from the same size light, and its IRIS reflector technology puts it atop the single-source LED lighting division. The Light Cannon XP leverages a focused beam pattern to provide 1,115 feet of usable light from within a rugged black aluminum and polycarbonate housing for durability you can trust—even in extreme conditions.

The 9893365 is backed by Vision X’s extended warranty and comes with two 4.5” Cannon XPs, dual wiring harness, multi-volt 9-32-volt DC input, and installation instructions. Snap-on polycarbonate covers available to produce light pattern varieties and tints.

Features

  • 1,115’ of usable light.
  • 10-degree Spot beam pattern.
  • 40W LED.
  • IRIS reflector technology.
  • Hybrid aluminum-polycarbonate housing.
  • Available in two-light kit.
  • Includes wiring harness; mounting kits sold separately.

Vision X (9893365): 4.5” Light Cannon XP

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

NSF1 Project Jeep Part 15: Rancho 3.5″ Sport Lift Kit & Differential Covers

John Arnaud Leave a comment
Use This Post Clip for Email

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we take a closer look at the following from Rancho Suspension:

Rancho 3.5″ Lift Kit (RS66110B)

Rancho HD Differential Cover Dana 30 (RS6218)

Rancho HD Differential Cover Dana 44 (RS6209)

Follow the NSF1 project on:

Facebook: https://www.facebook.com/NSF1Jeep
Twitter: https://twitter.com/performancejeep #NSF1 .

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Westin Automotive (59-9525-12JKB5): Snyper Marksman Bull Bar / Front Bumper for JK

John Arnaud Leave a comment
Use This Post Clip for Email

The one-piece Snyper Marksman (59-9525-12JKB5; textured black finish) from Westin Automotive is two rough and rugged products in one: a full-width off-road winch bumper with welded bull bar for Jeep Wrangler JK. Constructed from 7-gauge steel and predrilled for winches up to 10.25” tall with 8–12K capacities, the Snyper Marksman boasts an aggressive, chiseled design that looks and performs like a champ.

This product includes four openings for flush-mount LED auxiliary lights, 1” thick shackle mounts, and a laser-cut Snyper logo, and is backed by Westin’s 1-year warranty on finish and limited lifetime warranty on workmanship.

Features

  • Front winch bumper with welded bull bar for Jeep Wrangler JK.
  • One-piece, 7-gauge steel construction with laser-cut Snyper logo.
  • Accommodates most medium-frame 8,000–12,000 lb. winches up to 10-1/4” tall.
  • Predrilled for winch and fairlead mounting.
  • Fits most (4) flush-mount auxiliary lights.
  • Includes 1” thick HD shackle mounts.
  • Mounting brackets mount directly to frame.
  • Textured black finish.
  • Limited lifetime warranty on workmanship; 1-year warranty on finish.

Westin Automotive Snyper Marksman Bumper Bull Bar JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley (553-107): EFI LED Light Bar

John Arnaud Leave a comment
Use This Post Clip for Email

The days of low oil dummy lights are behind you! The new EFI LED Light Bar from Holley will revolutionize the way you think about shift lights and warning indicators. 553-107 features 14 fully programmable LEDs that leverage Holley’s stand-alone digital dash or EFI digital dash, allowing you to set LED color, brightness, and flash rates as well as user-definable warning indicators for a fully customizable experience!

The Holley LED Light Bar keeps your shifts on time and allows you to diagnose any ECU output at a glance—without removing your attention from the pavement ahead.

  • Fully customizable, 10-LED shift light.
  • 4 perimeter LEDs act as user-definable warning lights.
  • 3 programmable RPM ranges.
  • 15 levels of adjustable brightness.
  • Auto brightness or dimming based on ambient light.
  • 10 LED colors to choose from for easy identification.
  • Multiple flash rates.
  • Includes roll-bar and in-dash mounting kits for ease of installation.
  • Works with Holley stand-alone digital dash (553-109) and Holley EFI digital dash (553-106).
  • CAN plug-and-play installation gets going quickly.
  • User-friendly touchscreen interface via dash
Holley (553-107): EFI LED Light Bar
Holley (553-107): EFI LED Light Bar

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rancho (RS66107B): 3-Inch Trail System for ’07–’15 Jeep Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re looking for the perfect ride for your Jeep Wrangler or Wrangler Unlimited, look no further than the 3” Trail System from Rancho. In addition to the enhanced ride and overall stance, this system gives you the ability to add larger tires to your JK—35” in the case of the 3” Trail System—without compromising the caster and pinion angle. Made in the USA!

  • Fits up to 35-inch tires.
  • Front/rear coil springs, front adjustable track bar, and front/rear adjustable upper control arms included.
  • Extended-length front sway bar end link.
  • Upgraded front and rear bump stop spacer.
  • Front extended-length brake lines.
  • Rear track bar bracket and rear brake line drop brackets.
  • Will not affect the Electronic Stability Control System.
  • Brackets are made from high-strength, low-alloy steel.
  • 100% bolt-on system!
Rancho (RS66107B): 3-Inch Trail System for ’07–’15 Jeep Wrangler JK
Rancho (RS66107B): 3-Inch Trail System for ’07–’15 Jeep Wrangler JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

DEI: EXO Series Exhaust and Pipe Wrap

John Arnaud Leave a comment
Use This Post Clip for Email

The Design Engineering, Inc. EXO Series™ exhaust wrap is designed for use in extreme environments. Traditional exhaust wraps have not been able to withstand the dirt and water that can accompany off-road, dirt track, desert, and other forms of intense driving. The EXO Series features a dual-layer design that incorporates a combination of high-temperature glass covered with a 304-grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact shielding. What’s more, DEI’s unique Air Gap Technology keeps the glass fiber wrap from directly contacting the hot surface by way of an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe, or exhaust system; this size also makes it perfect for high-impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped, keeping the wrap tight and making installation easy. Delivering outstanding looks and rugged performance over the long haul, this product is available in Black or Tan in either 1.5” x 10’ or 1.5” x 20’ rolls.

EXO Series Exhaust Wrap
EXO Series Exhaust Wrap

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Talking Performance with Painless

John Arnaud Leave a comment
Use This Post Clip for Email

By John M. Arnaud

When the candy apple red Camaro pulled into our parking lot last week, we knew Painless Performance had arrived. Company President Adrian Murray and National Sales Manager Derek Love came into town to talk shop, marketing, and the promotion of their exciting new Trail Rocker product line.

This year Painless celebrated its 25th anniversary in the aftermarket industry. The company boasts the number-one-selling chassis harness in addition to a variety of fuel injection management systems and other electrical components. Long known for excellence in the classic car and truck sectors, the company is moving into new territory with the Trail Rocker for Jeep, an in-dash power center that allows off-road adventurers to control up to eight accessories from the safety of a waterproof housing.

Painless Performance Visits Performance Corner
Painless Performance Visits Performance Corner

This week of all weeks, Performance Corner is grateful to count Painless Performance as a valued partner. Thanks for coming down to see us…and here’s to an exciting 2016!

To plug into the latest products from Painless Performance, visit your local Performance Corner retailer. You can find an affiliated store using our dealer locator.

If you are an aftermarket accessories retailer who would like to become part of the nationwide Performance Corner network, please join us today!

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Bushwacker (40969-02): Pocket-Style Flares for 2015 Chevrolet Colorado 62.7″ Bed

John Arnaud Leave a comment
Use This Post Clip for Email

With their recessed stainless steel bolts and massive presence, Pocket Style® Fender Flares are a Bushwacker original and an off-road icon. They’re custom-designed for your Chevrolet Colorado to complement oversized tires and high-clearance lift kits. You can even mount them right out of the box. Their tough, OEM-style matte black finish is UV protected to prevent chalking. You can also paint them to match or accent your truck’s body color for a factory-custom look.

Pocket Style® Fender Flares are made in the USA from thick, warp-resistant Dura-Flex® 2000 material that adds durability and flexibility on the trail. Despite their hard-core styling, Pocket Style® Fender Flares install easily with no drilling. When you need maximum tire coverage with minimum time and effort, it’s in the pocket–Pocket Style® Fender Flares from Bushwacker.

  • Add up to 1.5″ of tire coverage
  • Install easily with no drilling
  • OEM matte black finish is easy to paint
  • 100% UV-protected Dura-Flex® 2000–no chalking
  • Made in the USA with a limited lifetime warranty

    Bushwacker 40969-02
    Bushwacker 40969-02

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.