Category: News

Rugged Ridge (11546.50): HD Tire Carrier Kit for 2007-2015 Jeep Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

The Spartacus HD Tire Carrier System provides the ultimate in strength and stability for mounting your oversized wheel and tire; it is functionally designed to manage the amplified force and vibrations produced during extreme off-road conditions. The precision die-cast aluminum hinge casting provides maximum strength without the excess weight of steel. The one-piece design maintains one-handed access to cargo and rigidly links the wheel mount to the reinforced section of the rear quarter panel. In combination with forged steel hinge brackets and hardened steel pins, this results in superior load capacity over factory tailgate hinges, reducing wear and increasing longevity. The wheel mount lifts the mounting position and incorporates depth and tilt adjustability for large diameter and wide tire options. Tested to MIL-STD-810 to simulate extended duration of vigorous off-road driving conditions. Rated for up to and including 37” wheel tire combinations. Includes adjustable third brake light bracket. Compatible with OE and most aftermarket rear bumpers. No drilling required.

Rugged Ridge 11546.50
Rugged Ridge 11546.50

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Air Lift Company (88349): LoadLifter 5000 ULTIMATE Air Spring Kit with Internal Jounce Bumper for 2015 Ford F-450

John Arnaud Leave a comment
Use This Post Clip for Email

The closed-cell urethane foam jounce bumper inside each 88349 LoadLifter 5000 ULTIMATE adjustable air spring kit for the 2015 Ford F-450 provides a cushion of air that absorbs shock, eliminates harsh jarring on rough roads, and protects vehicles that are carrying heavy loads. Vehicles using this innovative new product may never bottom out again due to the shock-absorbing properties of the internal jounce bumper.

The ULTIMATE air spring kit is maintenance-free. Drivers can safely run with zero air pressure for limited amounts of time because the internal jounce bumper protects the bag from any potential damage. While the factory jounce bumper is sometimes removed when installing standard air springs, the ULTIMATE air springs use an internal jounce bumper for the optimal ride and comfort when towing or hauling.

LoadLifter 5000 and LoadLifter5000 ULTIMATE kits are Air Lift’s heaviest-rated kits, specifically engineered for hauling or towing heavy loads. All if them work with a vehicle’s existing suspension to give up to 5,000 pounds of extra leveling capacity when needed, right up to the manufacturer’s recommended Gross Vehicle Weight rating. Rugged and durable, LoadLifter 5000 air springs are reinforced with layers of fabric and rubber, similar to how a tire is manufactured. The end caps are constructed from ultra-high-strength composite nylon; strong as steel, but lighter and corrosion proof.

Air adjustable from 5 to 100 PSI, Air Lift air spring kits increase safety and comfort by helping to level and stabilize vehicles when towing or hauling heavy loads. A level, stable vehicle results in better braking, steering, and headlight aim, in addition to reducing sway, “porpoising”, and bottoming out. Just add air when loaded and reduce air pressure when riding unloaded.

Includes:

  • 2 air springs
  • All necessary mounting brackets
  • Air lines
  • Schrader valve
  • Installation hardware
  • A fully illustrated instruction manual

    Air Lift Company 88349
    Air Lift Company 88349

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edelbrock (79949): E-CNC 215 Cylinder Heads for Chevy LS1/LS2

John Arnaud Leave a comment
Use This Post Clip for Email

Designed for 1997 and later GEN 3 and 4 LS1/LS2 Chevy engines, including 4.8L, 5.3L, 5.7L, and 6.0L. All E-CNC cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved air-flow. Dyno tests proved these heads are capable of 457 hp and 438 ft-lb. of torque. High-quality conical beehive springs are secured with steel retainers and valve locks for performance up to .600″ valve lift. Match with any one of Edelbrock’s LS series intake manifolds and camshafts for a dyno-proven performance combination. E-CNC 215 head is 50-state street legal.

Features:

  • Combustion chamber volume: 65cc
  • Intake runner volume: 212cc
  • Exhaust runner volume: 76cc
  • Intake valve diameter: 2.02″
  • Exhaust valve diameter: 1.57″
  • Valve stem diameter: 8mm
  • Valve guides: manganese steel
  • Deck thickness: 5/8″
  • Valve spring diameter: 1.55″ / 1.30″
  • Valve spring maximum lift: .600″
  • Pushrod diameter: 5/16″
  • Valve angle: 15°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x .750 reach, gasket seat

    Edelbrock 79949
    Edelbrock 79949

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hypertech (32501): Max Energy GM Power Programmer

John Arnaud Leave a comment
Use This Post Clip for Email

Max Energy tuning extracts every bit of energy possible out of every molecule of fuel, giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower, and torque, our engineers first optimize the spark and fuel curves point-by-point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.

Hypertech 32501
Hypertech 32501

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

K&N (57-2578): 2011-2014 Ford Mustang GT 5.0L Performance Air Intake System

John Arnaud Leave a comment
Use This Post Clip for Email

The K&N 57-2578 FIPK air intake system replaces the restrictive factory air filter and air intake tubing while retaining the factory air box on specific Ford Mustang GT models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow for a guaranteed horsepower gain. This allows your engine to inhale a larger amount of air than the factory air filter and air intake assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-2578 air intake comes with a replacement K&N high-flow air filter and an aerodynamically engineered intake tube that easily connects to your vehicle’s factory airbox and throttle body. The air filter can be used for up to 50,000 miles before servicing is needed, depending on driving conditions. This air intake system is designed for quick and easy installation with commonly available tools. Meets California emission standards and is legal for use in all 50 states.

K&N 57-2578
K&N 57-2578

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

TruXedo (1705211): Truck Luggage Expedition

John Arnaud Leave a comment
Use This Post Clip for Email

The Expedition is a cargo storage sling that will attach anywhere along the rails of the truck bed, providing quick and convenient storage that can be removed in seconds. The Expedition offers you the utility of a toolbox when you need the extra storage. This rail-mounted cargo bag boasts 8 cubic feet of extra storage. It’s easily installed and fits most truck beds.

This weather-resistant cargo bag comes with plastic floor panels and inserts for custom organization, and also sports an open pocket in the front.

  • Fits under most tonneau covers
  • Easy installation—no drilling
  • Commercial-grade fabric
  • Weather resistant

    TruXedo 1705211
    TruXedo 1705211

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Husky Liners (53341): X-act Contour Front Floor Liners 2015 Ford F-150 SuperCrew Cab Pickup

John Arnaud Leave a comment
Use This Post Clip for Email

The Husky Liners® X-act Contour® perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you’ve got liner gold.

Husky Liners 53341
Husky Liners 53341

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

LUND (34641403): Terrain HX Step 2015 Ford F-150 SuperCrew

John Arnaud Leave a comment
Use This Post Clip for Email

Lund’s Terrain HX Step™ is an aggressive but functional nerf bar that provide a rugged off-road look and allows easier entry and exit. The design adds rocker panel protection from road debris and helps guard against door dings.

Features:

  • Made from 3″, 3-mm-thick, heavy-duty steel tubing
  • Hoop steps are securely welded to the main tube
  • 4″ drop for easier cab entry and exit
  • Steel non-slip skid plate on each hoop step
  • Available in a black powder-coated textured finish
  • Easy, no-drill installation
  • Limited lifetime warranty

    LUND 34641403
    LUND 34641403

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel (BD-450-VS): Black Diamond 450 CFM Four Barrel Carburetor

John Arnaud Leave a comment
Use This Post Clip for Email

Quick Fuel Technology’s new 450-CFM, 4-BBL carburetors for the street are designed for small-displacement 4-cylinder, 6-cylinder, and V-8 engines. They offer all the features found in QFT’s Slayer Series carburetors, including:

  • Side-hung / single-inlet fuel bowls
  • Changeable idle air and high-speed bleeds
  • 3-stage emulsion circuits in primary metering block
  • Changeable primary idle feed restrictions and power valve restrictions
  • QFT™ QuickSet™ vacuum secondary housing for external adjustment without changing springs
  • Notched secondary float for use with jet extensions
  • Secondary metering plate with changeable jets
  • Fully adjustable electric choke
  • Black Diamond® coating for enhanced appearance and durable finish

    Quick Fuel Technology BD-450-VS
    Quick Fuel Technology BD-450-VS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

SCT (7416): X4 Power Flash General Motors Programmer

John Arnaud Leave a comment
Use This Post Clip for Email

The X4 Power Flash arrives preloaded with dyno-proven tunes that increase horsepower and torque! Programming your vehicle with one of SCT’s preloaded tune files is as easy as 1-2-3: Simply plug the OBDII connector into your vehicle’s OBDII port, select the file using the simple-to-navigate menu, and within minutes the X4 programs your vehicle.

With a huge backlit display, the SCT X4 Power Flash makes it easy to read built-in data logs or real-time monitored vehicle data, view popular sensor data (e.g., EGT, air/fuel ratio), or input from any other 0-5 volt source!

The X4 Power Flash device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. Restoring your vehicle is as easy as selecting Return to Stock from the device menu.

This product is not legal for sale or use in California on pollution-controlled motor vehicles.

SCT 7416
SCT 7416

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.