Category: News

Holley: Sniper Self-Tuning EFI

John Arnaud Leave a comment
Use This Post Clip for Email

The Sniper Self-Tuning EFI from Holley brings EFI within range of your build budget. The Sniper is economically priced to give you all the benefits of EFI with money left over to finish or upgrade the rest of your ride. Perfect for street rods, muscle cars, off-road trucks, or nearly any carbureted vehicle. Put an end to cold start issues, hesitations, vapor lock, and flooding with the Sniper!

Coming June 2016!

  • Bolt-on carburetor replacement (designed to fit single and dual carb manifolds).
  • Throttle body–mounted ECU—no extra boxes to mount.
  • Supports up to 600 hp or 1,200 hp (4- and 8-injector versions, respectively).
  • Four-wire vehicle connection (battery +, battery –, switched ignition, and rpm).
  • Integrated fuel pressure regulator, timing control, and coil driver.
  • Color touchscreen for setup and gauge views.
  • Calibration wizard—no laptop required!
  • Self-tuning convenience.
  • Available in base and master kits (complete fuel systems).
Holley: Sniper Self-Tuning EFI
Holley: Sniper Self-Tuning EFI

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rampage Products: Rhino Linings Rocker Guards for Jeep Wrangler

John Arnaud Leave a comment
Use This Post Clip for Email

All new from Rampage Products are Rhino Linings Rocker Guards for 2007–2016 Wrangler JKs (Limited and Unlimited) and 1997–2006 TJs. Made from Rhino® Linings polyurethane, these products are custom designed for your Jeep’s size and shape and help prevent scratches and dings caused by rocks and other flying debris. They not only add protection, but they also look great and are easy to install.

  • Protect your rocker panels from road debris.
  • Made from durable Rhino Linings polyurethane.
  • Go on securely via included adhesive backing.
  • JK kits protect rocker panels, lower doors, rear corner panels, and cowl covers.
  • TJ kits protect rear rocker panels, corner panels, and cowl covers.
  • Made in the USA.
  • Warranty: limited lifetime.
Rampage Products: Rhino Linings Rocker Guards for Jeep Wrangler
Rampage Products: Rhino Linings Rocker Guards for Jeep Wrangler

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rigid Industries (41595): RDS-Series LED Grille for ’15–’16 GMC Canyon

John Arnaud Leave a comment
Use This Post Clip for Email

Rigid Industries is introducing a new grille featuring an RDS-Series 30” Hybrid Spot Optics LED Light Bar for the 2015–2016 GMC Canyon. Sporting a novelty Rigid Industries emblem, this two-piece grille is made from laser-cut, black powder-coated 304 stainless steel and is assembled using stainless steel button socket head bolts and nyloc nuts—no welds. All hardware and instructions are included; professional installation recommended, as OEM grille shell modification is required.

  • Aggressive Rigid styling.
  • Stainless steel construction.
  • Black powdercoat.
  • All hardware included.
  • Limited lifetime warranty.
  • Made in the USA.
Rigid Industries (41595): RDS-Series LED Grille for ’15–’16 GMC Canyon
Rigid Industries (41595): RDS-Series LED Grille for ’15–’16 GMC Canyon

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

2015 PRI Show – Energy Suspension

John Arnaud Leave a comment
Use This Post Clip for Email

Welcome to the 2015 PRI Show! In this video series, we will show you the exciting new products that you can expect to see in 2016. In this episode, Energy Suspension’s very own Michael Santa Cruz goes over their new suspension components for 2016. Be on the lookout for more videos from this series over the coming weeks.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage with Performance Corner: Extang Solid Fold 2.0

John Arnaud Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner garage as we take you through the installation of some of today’s hottest truck accessories. In this episode, we install the Solid Fold 2.0 from Extang on a 2015 Ram 1500.

Parts used in this video:

Extang Solid Fold 2.0 (Part# 83425)

Want to check out more about Extang? Check out facebook here: https://www.facebook.com/performancecorner

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor

John Arnaud Leave a comment
Use This Post Clip for Email

In circle track classes that mandate two-barrel carburetors, customizing a street carburetor has been the norm for decades. Not anymore. Newly designed to meet the unique demands of circle track racing, Quick Fuel Technology’s XP-Series carb offers the performance benefits of a custom carb in an affordable, class-legal, ready-to-run package that costs less than making each required modification separately.

XP-Series carbs boast a high-flow aluminum main body that places the venturi over the throttle-body assembly. To further increase airflow, QFT put the air horn over the venturi, removed the choke tower, and precision profiled the air inlet transition. The result: improved horsepower and throttle response. Available in 500- and 600-cfm sizes, the XP-Series has set the bar for two-barrel circle track carbs.

  • Turnkey two-barrel carb ready for the circle track.
  • High-flow aluminum main body.
  • Roller bearing seals improve throttle response and reduce shaft wear.
  • Available in 500- and 600-cfm sizes.
  • Fuel type: gas.
Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor
Quick Fuel Technology (XP-4412): XP-Series 2-bbl Circle Track Carburetor

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger

John Arnaud Leave a comment
Use This Post Clip for Email

With an upper stick crafted from high-strength steel, this billet aluminum shifter from Hurst reduces shift throw by more than 30% for your 2009-2016 Dodge Challenger with 6-speed transmission. Model applications include R/T, SRT8, SRT392, Scat Pack, and SRT Hellcat. Black anodized finish and backed by a limited lifetime warranty.

  • Six-speed manual for ’09–’16 Challenger.
  • Billet aluminum construction.
  • High-strength steel upper stick.
  • Reduces shift throw by over 30%.
  • Color: black.
  • Finish: anodized.
  • Limited lifetime warranty.
Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger
Hurst (3916120): Six-Speed Billet-Plus Manual Shifter for Challenger

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge (13107.42): All-Terrain Center Console Cover for ’11-’16 Jeep Wrangler JK

John Arnaud Leave a comment
Use This Post Clip for Email

The 13107.42 All-Terrain Center Console Cover from Rugged Ridge is designed to prevent the accelerated wear and tear common to Wrangler JK interiors. Unlike cloth and leather consoles, these heavy-duty covers will keep your center console in showroom condition for years to come. Molded from durable polyurethane foam, these covers create a barrier that protects your vulnerable console from scratches, rips, stains, and even damage from pet claws, while also enhancing interior styling with a proprietary tread design. These covers install securely within seconds with supplied automotive-grade adhesive tape.

  • Prevents wear and tear common to JK interiors.
  • Made from hardy polyurethane foam.
  • Upgrades interior appearance with a tread design unique to Rugged Ridge.
  • Goes on quickly via supplied automotive-grade tape.
  • Installation time: less than 1 hour.
  • Warranty: 5-year limited.
Rugged Ridge (13107.42): All-Terrain Center Console Cover for 11-16 Jeep Wrangler JK
Rugged Ridge (13107.42): All-Terrain Center Console Cover for 11-16 Jeep Wrangler JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Big Country (105870): 5” Fusion Side Bars – Textured Black

John Arnaud Leave a comment
Use This Post Clip for Email

Boasting the increasingly popular wide oval style, the Fusion Series of cab-length side bars from Big Country features the company’s proven channel-style mounting system* and replaceable, series-specific end caps for a smooth, welded look.

The 105870 5” side steps are constructed from mild steel, protected with a stylish textured black finish, and backed by a 5-year warranty.

  • Mild steel construction.
  • Cab-length straight bars.
  • Replaceable end caps.
  • Installs easily with no drilling via U-channel bracket mounting system*.
  • Five-year warranty.

*Brackets sold separately.

Big Country (105870): 5” Fusion Side Bars – Textured Black
Big Country (105870): 5” Fusion Side Bars – Textured Black

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley (241-112): Tall LS Aluminum Valve Covers – Satin Black

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re ready to add a custom look to your engine bay, 241-112 Tall LS Valve Covers from Holley will set you apart from the crowd. Adding to Holley’s already-impressive lineup of LS engine components, this product is designed to add 0.54” of internal clearance over factory height valve covers.

Boasting Holley’s signature integrated angled coil mounts, these covers fit LS1, LS2, LS3, LS6, and LS7 engines using coils with a standard LS3 bolt spacing of 72 mm. They come ready to install with an OE-style baffle and ventilation system and lengthened factory-style mounting hardware, and include a billet aluminum oil fill cap. Satin black finish.

  • Angled coil mounts deliver a smooth, clean look.
  • Retain the high-tech look and performance of “coil on cover.”
  • Eliminate unsightly OE-style coil brackets.
  • Billet aluminum oil fill cap.
  • Reuse original gaskets and bolts.
  • Compatible with LS1, 2, 3, 6, and 7 coils with 72 mm bolt spacing.
  • Add 0.54” internal clearance over factory covers.
  • Proven OE-style baffles and vents.
  • 241-112 features a satin black finish; other finishes include polished, glass red, and natural cast.
Holley (241-112): Tall LS Aluminum Valve Covers - Satin Black
Holley (241-112): Tall LS Aluminum Valve Covers – Satin Black

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.