Category: News

In the Garage™ with Performance Corner™: AutoMeter Air Drive Wireless Gauge System

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Joseph Mills from AutoMeter and install their AirDrive Wireless Gauge System on a 2015 Ford F-150

Parts used in this video:

AirDrive Wifi OBD-II Module (9110)
2-1/16″ AirDrive Boost Gauge (9160-T)
2-1/16″ AirDrive Wideband Gauge (9178-T)

Want to check out more about AutoMeter?
https://www.performancecorner.com/manufacturer/auto-meter

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT (44-5877): 8” Lift Kit with Bilstein Shocks for ’07-’18 Toyota Tundra

David Ayers Leave a comment
Use This Post Clip for Email

If you want a BIG lift kit for your Tundra rig, the ReadyLIFT 44-5877 8” complete lift kit with ever-popular Bilstein shocks is the obvious choice. This kit starts with an ultra-strong, laser-cut, CNC-bent, welded and boxed subframe drop assembly that both maintains your suspension geometry and increases ground clearance over 2” more than the competition. Its unique iron knuckles guarantee a precise fit while allowing retention of factory tie rods.

The kit creates 8” of lift thanks to ReadyLIFT’s offset spacer design, which attaches to the factory strut (for a factory ride) without increasing track width. This means your front tires won’t stick out further than your rear tires (like with other kits). Plus, it means you can run your stock wheels and maintain your spare tire if needed.

Wheel note: The 44-5877 system works only with 20” factory wheels (will not work with 18” factory wheels). Aftermarket wheels acceptable.

Features

  • Guaranteed to keep your factory ride and never wear, break, or fail.
  • Guaranteed toughest finish and safest way to lift.
  • Laser-cut, CNC-bent, welded and boxed subframe drop assembly.
  • CNC-machined iron knuckles allow use of the factory tie rods—no cutting or replacing.
  • Precision-crafted offset upper strut extensions and spring compression spacer retain factory track width.
  • Easy-to-install differential drop system keeps the CV and driveline angles near factory for optimum 4WD performance.
  • Includes new Bilstein shocks (rear).
  • New powder-coated sway bar frame mount spacers keep your sway bar working properly.
  • Thick steel skid plate protects your engine and subframe in adverse driving conditions.
  • Powder-coated strut extensions, cast iron rear blocks, and U-bolts will last as long as your Toyota.
  • Rear blocks are designed FOR the Toyota Tundra (not universal blocks!).
  • Made in the USA.
  • Guaranteed for life against manufacturing defects.

ReadyLIFT 8 Inch Lift Kit with Bilsetin Shocks for Tundra 44-5877

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Iron Cross: Sidearm Steps

David Ayers Leave a comment
Use This Post Clip for Email

The all-new Sidearm Steps from Iron Cross feature a groundbreaking design sure to give your truck a unique profile—whether stock or custom. Adding function to form, these steps provide the most ergonomic step up of any side step on the market today, in an eye-catching design that leaves behind the typical hoop step. They include a traction-enhanced step surface that offers more sure footing in any weather conditions.

Made from rugged steel and featuring a textured black powdercoat protected by a 5-year finish warranty, Iron Cross Sidearm Steps are sold in pairs and come with all the hardware and brackets you need for installation. Made in the USA!

Features

  • Rugged steel step with open-ended step.
  • Includes installation brackets and hardware.
  • Sold in pairs.
  • Finish: textured black powdercoat.
  • Warranty: 5 years.
  • Made in the USA.

Iron Cross Sidearm Steps

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (36-E87QFT): EChecker E85 Fuel Test Tube

David Ayers Leave a comment
Use This Post Clip for Email

The 36-E87QFT EChecker test tube from Quick Fuel Technology simply and accurately checks the percentage of ethanol content in your E85 pump gas. Just add water to the line, fill the rest of the way with the fuel you want to test, and shake it up! In just a few minutes, a line of separation will appear, telling you the true percentage of your fuel. Includes protective sleeve and instructions.

Features

  • Accurately checks the ethanol percentage of your E85 fuel.
  • Works in just a few minutes.
  • Just add water and fuel.
  • Includes protective sleeve and instructions.

Quick Fuel Technology EChecker E85 Fuel Test Tube 36-e85qft

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Royal Purple Max-Blast Fuel Intake Cleaner

Royal Purple: Max-Blast Intake Valve Cleaner

David Ayers Leave a comment
Use This Post Clip for Email

With its concentrated PEA detergents, Max-Blast high-performance engine intake system cleaner from Royal Purple removes harmful intake valve deposits to restore engine performance and fuel economy. Max-Blast can be used with any type of fuel injection—gasoline and diesel—and is ideal for direct injection. Available in 12 oz. cans.

Features

  • Remove deposits from intake valves.
  • Concentrated PEA detergents.
  • Provides immediate clean-up.
  • Ideal for direct injection.
  • For gas or diesel injected engines.

Royal Purple Max-Blast Fuel Intake Cleaner

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: TruXedo Pro X15 Premium Roll-Up Truck Bed Cover

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the Pro X15 Premium Roll-Up Truck Bed Cover on a 2017 Chevy Silverado.

Parts used in this video:

Pro X15 Roll-Up Truck Bed Cover (1471801)

Want to check out more about TruXedo?
https://www.performancecorner.com/manufacturer/truxedo

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES Fender Flares for Jeep

ARIES: Fender Flares for Jeep

David Ayers Leave a comment
Use This Post Clip for Email

These 4” fender flares from ARIES are perfect for your Jeep Wrangler’s oversized off-road tires, featuring application-specific contours and a narrow width to showcase larger tires. Available for front and rear, these lightweight aluminum flares are strong and rust-free and bolt on as a direct replacement for your factory flares. They also accept ARIES LED side markers (150024) for additional safety on and off-road.

Choose from a textured black finish or a paintable raw-aluminum finish. Includes all mounting hardware and a 5-year limited warranty.

Features

  • Narrowed width shows off larger off-road tires.
  • Available for front and rear wheels.
  • Bolts right on to the frame.
  • Mounting hardware included.
  • Two finishes available: paintable raw aluminum or textured black.
  • Warranty: 5-year limited.

ARIES Fender Flares for Jeep

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Edge Products: New Revolver Performance Kits

David Ayers Leave a comment
Use This Post Clip for Email

Good news: the Insight CTS2 from Edge Products can now control Edge Revolver chips for Ford 7.3L diesel—including changing power levels with just a few taps of the touch screen.

These new Revolver kits include the chip, Insight CTS2, and the new EAS Revolver cable that connects the Insight to the chip (cable sold separately for existing CTS2 owners). The six-position chip offers adjustable HP (up to 140) using the CTS2 display.

Features

  • Plug-in performance chip to operate with your specific 7.3L.
  • Shift-on-the-fly power levels with the Insight CTS2.
  • Full in-cab, state-of-the-art digital gauges.
  • Up to six options for performance and other various modes.
  • Revolver chips are loaded with standard or custom tunes.
  • Calibrations for your specific year, make, model, and transmission.
  • Up to 140 horsepower and 250 ft./lb. torque.
  • Increase fuel economy.
  • Easy installation.

Edge Products Revolver Performance Kit

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Belltech (2514): Drop Spindle Set

David Ayers Leave a comment
Use This Post Clip for Email

The Belltech 2514 drop spindle set lowers your vehicle 2” or 3”, depending on application, while improving handling and factory ride quality. This product fits 2016+ Chevy Silverado 1500, plus a variety of other applications, including but not limited to certain years of Cadillac Escalade, Chevrolet Suburban and Tahoe, and GMC Sierra 1500 and Yukon.

Features

  • Lowers 2” or 3”, depending on application.
  • Improves handling and factory ride quality.

Belltech Drop Spindle Set 2514

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARP: Pro Series Head Stud Kits for Big Block Chrysler

David Ayers Leave a comment
Use This Post Clip for Email

Manufactured from premium-grade 8740 chrome-moly and available with either hex or 12-point nuts, the new BBC head stud kits from ARP feature centerless-ground Pro Series studs heat-treated before thread rolling and nominally rated at 200,000 PSI tensile strength. Kits includes a 0.5 oz. pack of ARP Ultra-Torque fastener assembly lubricant and are available for immediate delivery.

Two part numbers available:

  • 145-4014: Big block Chrysler 383-440 with Edelbrock Victor 77919 or 77920 heads hex.
  • 145-4301: Big block Chrysler 383-440 with Edelbrock Victor 77919 or 77929 heads 12-point.

Features

  • Choose from hex nuts or 12-point nuts.
  • Made from premium-grade 8740 chrome-moly.
  • Centerless ground and heat treated.
  • Rated at 200,000 PSI tensile strength.
  • Includes 1/2-ounce pack of ARP Ultra-Torque fastener assembly lubricant.
  • Available for immediate delivery.

ARP Pro Series Stud Kits for Big Block Chrysler

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.