Category: Industry

Rugged Ridge (11546.56): Spartacus HD Tire Carrier Hinge Casting for ’18-’19 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

The Spartacus HD tire carrier hinge casting from Rugged Ridge provides the ultimate in strength and stability for mounting an oversized wheel and tire on your Jeep Wrangler JL. Designed to manage the amplified force and vibrations produced during extreme off-road conditions, the 11546.56 hinge casting provides maximum strength without the excess weight of steel.

The one-piece application completely replaces your factory tailgate hinges, creating a structurally stable link between the tailgate and the body and resulting in smooth one-hand access to your JL’s rear cargo area. In combination with forged-steel hinge brackets and hardened steel pins, this design creates superior load capacity over the factory tailgate hinges to reduce long-term wear.

The patent-pending Rugged Ridge Spartacus HD tire carrier hinge casting is compatible with OE and most aftermarket rear bumpers and installs with no drilling required.

Features

  • For mounting an oversized wheel and tire on 2018–2019 Jeep Wrangler JL.
  • Die-cast aluminum construction for the strength of steel without the weight.
  • Manages the amplified off-road forces and vibrations.
  • Completely replaces factory tailgate hinges.
  • Offers smooth, one-hand access to the rear cargo area.
  • Forged steel hinge brackets and pins produce superior load capacity and decreased wear.
  • Compatible with OE and most aftermarket rear bumpers.
  • Installs with no drilling.
  • Installation time: 2+ hours.
  • Warranty: 5-year limited.
Rugged Ridge Spartacus HD Tire Carrier Hinge Casting for Jeep Wrangler JL 11546.56

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Trimax: Aluminum Adjustable Drop Hitch for 2.5” Receivers

David Ayers Leave a comment
Use This Post Clip for Email

Available in drop lengths from 6” to 12” (and adjustable up to 0”), new Trimax aluminum drop hitches for 2.5” receivers feature an industry-leading 20,000 lb. tow rating and a 2,000 lb. tongue rating. Made from polished aluminum, these hitches install easily, adjust in seconds, and include dual 2” and 2-5/16” chrome balls, receiver lock, pin, and clip.

Features

  • 2.5” receiver hitch.
  • 100 percent polished aluminum.
  • Dual 2” and 2-5/16” chrome balls and receiver lock.
  • Weight tested to 20K pounds (2K lb. maximum tongue weight).
  • Easy to install and adjusts in seconds (0–12” drop or rise).
  • Aluminum ball mount adjusts in 1” increments.
Trimax Aluminum Adjustable Drop Hitch for 2.5 Inch Receivers

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner®: WARN Ascent Front & Rear Bumpers

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Brad Goodfellow from WARN to the garage and install their Ascent Front & Rear Bumpers on a 2016 Chevy Silverado.

Parts used in this video:

Ascent Front Bumper (100921)

Ascent Rear Bumper (96550)

Baja Grile Guard (100473)

Want to check out more about WARN?
https://www.performancecorner.com/manufacturer/warn

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge: Get Up to $500 Back on Qualifying Steps and Bumpers

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good January 1–31. Click image for printable form and complete details!

Rugged Ridge Up to 500 Back on Steps and Bumpers

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge: Get Up to $30 Back on Qualifying Floor Liners

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good January 1–31. Click image for printable form and complete details!

Rugged Ridge 30 Back on Floor Liners

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

T-Rex Grilles: Get $25 Back on X-Metal or $50 Back on Torch Grilles

David Ayers Leave a comment
Use This Post Clip for Email

Via mail-in form. Offer good January 1–31. Click image for printable form and complete details!

T-Rex 25 Back on X-Metal or 50 Back on Torch

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hypertech (752504): Speedometer Calibrator for 2019 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

Hypertech’s Speedometer Calibrator for 2019 Jeep Wrangler JL corrects the speedometer for larger-than-stock tires (24–40”). This product is a great value for drivers who desire only recalibration functions without more advanced tuning features.

Simply plug the device into your Jeep’s under-dash connector and select the new tire height. In a matter of minutes, your JL’s computer will be reprogrammed for accurate readings. Also reads, displays, and clears diagnostic trouble codes (DTCs).

Note: Not legal for sale or use in California.

  • For 2019 Jeep Wrangler JL.
  • Calibrate your speedometer for nonstock tires.
  • Read and clear diagnostic trouble codes (DTCs).
  • Not legal for use or sale in California.
Hypertech Speedometer Calibrator for 2019 Jeep Wrangler JL 752504

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

SuperSprings (SSF-402-54): SumoSprings Front for Jeep Wrangler JK

David Ayers Leave a comment
Use This Post Clip for Email

The patented SumoSprings suspension product from SuperSprings enhances load-carrying ability, stabilizes sway, and improves overall driver control and comfort. Manufactured from a proprietary closed microcellular urethane that provides a smooth progressive spring rate with superior damping properties, SumoSprings require no maintenance, don’t leak air, and need neither air lines nor compressors.

SuperSprings’ SSF-402-54 is designed as a front application for Jeep Wrangler JK; sold in pairs.

Features

  • For Jeep Wrangler JK (front).
  • Made from proprietary and patented microcellular urethane.
  • Maintenance-free design improves overall driver control and ride comfort.
  • Will not leak or rupture.
  • Progressive spring rate with superior damping properties.
  • Compresses up to 80% of original height with full memory rebound.
  • 1,400 lb. capacity at 50% compression.
  • Enhances load-carrying ability and reduces/stabilizes sway.
  • Sold as a pair (left and right).
SuperSprings SumoSprings Front for Jeep Wrangler JK SSF-402-54

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge (11238.40): Elite Billet-Style Aluminum Fire Extinguisher Holder

David Ayers Leave a comment
Use This Post Clip for Email

Manufactured from stunning cast aluminum, the 11238.40 Elite billet-style aluminum fire extinguisher holder from Rugged Ridge offers a secure extinguisher mount on any flat surface (with included hardware). Its internal spring-loaded, stainless steel release mechanism enables one-hand access when the need arises. The holder is compatible with standard 2.5 lb. extinguishers (not included).

The Elite billet-style aluminum fire extinguisher holder is protected by a premium matte-black textured powdercoat for an attractive appearance and years of service over rough trails or in bad weather; plus, Rugged Ridge offers a 5-year limited warranty for added peace of mind.

Features

  • For 1976–2018 Jeep Wranglers and CJs.
  • Billet-style cast aluminum with textured black powdercoat.
  • Spring-loaded release allows one-hand operation.
  • Compatible with most 2.5 lb. round extinguishers (not included).
  • Mounts to any flat with included hardware.
  • Installation time: < 1 hour.
  • Warranty: 5-year limited.
Rugged Ridge Elite Billet Style Fire Extinguisher Holder for Jeep Wrangler 11238.40

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner®: Go Rhino XE Series Light Mounts

David Ayers Leave a comment
Use This Post Clip for Email

Come inside the Performance Corner® garage as we take you through the installation of some of today’s hottest performance accessories In this episode, we welcome Ben Ramirez from Go Rhino to the garage and install their XE Series Light Mounts on a 2018 Jeep JL.

Parts used in this video:

XE Windshield Cowl Mount, single cube (730030T)

Want to check out more about Go Rhino?
https://www.performancecorner.com/manufacturer/go-rhino

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.