RIGID Industries (46709): A-Pillar LED Light Mounts for 2021 Ford Bronco Sport

Dial up the brightness on your Ford Bronco Sport with this application-specific mount kit from RIGID Industries, which allows installation of RIGID’s 4” 360-Series, D-Series, or Radiance pods. These mounts are fabricated from stainless steel and protected by a UV- and abrasion-resistant powdercoat to resist harsh conditions and provide years of use. Lights not included.

Features

  • For 2021 Ford Bronco Sport
  • Fits RIGID 360-Series, D-Series, or Radiance pods (not included)
  • Stainless steel construction
  • Abrasion- and UV-resistant powdercoat
RIGID Industries A-Pillar Light Mount for 2021 Ford Bronco Sport

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries (46702): A-Pillar Mount for ’16-’20 Toyota Tacoma

A clean installation of RIGID Industries’ high-output light is as close as the 46702 A-Pillar mount, designed just for 2016–2020 Toyota Tacoma (other applications available). This accommodating mount is compatible with a range of RIGID products, including 4” 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance pods (lights sold separately).

Made from stainless steel and covered with a UV- and abrasion-resistant powdercoat, this RIGID A-Pillar Mount is made in the USA to outlast the harshest environments.

Features

  • For 2016–2020 Toyota Tacoma
  • Fits RIGID 4” 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance pods (lights sold separately)
  • Stainless steel with a UV/abrasion-resistant coat
  • Made in the USA
RIGID Industries A-Pillar Mount for 16-20 Toyota Tacoma 46702

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: Chase Light Bar

Capable of producing more than 300,000 display combinations, the rear-facing Chase light bar from RIGID Industries adds safety and functionality to any UTV, buggy, Jeep, or other off-road vehicle by combining running, brake, reverse, turn signal, and more into a single advanced package. Housed in lightweight aluminum and protected by a polycarbonate lens, the 28” Chase light bar comes with 27 preprogrammed modes such as strobe, scroll, flash, and all-on, and can be customized to any vehicle trigger (four total triggers: one running and three auxiliary).

RIGID designed the Chase light bar to be compliant with multiple race series that require strobing blue, amber, green, and red light. It is available in tube-mount (PN 901801) or surface-mount (901802) options; the tube mount is adjustable from 1.5” to 2” in diameter, while the L-shaped surface mount allows adjustments up to 15 degrees.

Whatever your off-road lifestyle—enthusiast, light show-off, or die-hard racer—the Chase light bar from RIGID is the night-shattering sidekick you need.

Features

  • 28” light bar in tube- or surface-mount options (all mounting hardware included)
  • More than 300,000 possible configurations
  • 27 preprogrammed modes
  • 4 triggers: 1 running and 3 auxiliary
  • User-defined programming and usage
  • Supports running, brake, reverse, and turn signal functions
  • 9–16 VDC
  • High-grade aluminum housing with pressure-equalizing vent
  • High-impact polycarbonate lens
  • Reverse polarity and over/under voltage protection
  • Warranty: limited lifetime
RIGID Industries Chase Light Bar

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries (290413): Adapt E-Series 50″ LED Light Bar

The Adapt E-Series 50″ LED light bar from RIGID Industries features two layers of adaptive response to optimize your off-road lighting experience.

The first layer, called Active Power Management™, constantly monitors input voltage to adjust the amount of power drawn by the Adapt E-Series bar. This on-the-fly system will gradually reduce power consumption as needed until your vehicle’s power supply stabilizes.

The second layer, RIGID’s Active View Technology™, uses an internal GPS module to properly distribute power among three unique optic zones based on your vehicle’s speed—creating a beam pattern optimal for your current activity. The output seamlessly transitions among Scene optics for low speeds, Driving optics for moderate speeds, and Spot optics for high speeds.

The 50” RIGID Adapt E-Series LED light bar (PN 290413) actively manages power consumption and light output so you can Own the Night.

Features

  • Two layers of adaptive technology manage power draw and light output.
  • Internal GPS module and three optic zones (Scene, Driving & Spot)
  • Fit all existing E-Series grilles/mounts
  • High-grade aluminum alloy heat sink and high-impact polycarbonate lenses
  • 9–36 VDC
  • Pressure-equalizing vent and over/under voltage protection
  • Include harness, switch, and relay
  • Warranty: limited lifetime
RIGID Industries Adapt E-Series Light Bars

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: 360-Series Fog Mount Kits

RIGID Industries’ all-new 360-Series fog light kits feature optimized beam patterns that project up to 3,100 raw lumens, aluminum housing, a blacked-out exposed circuit board, prominent RIGID branding, and a limited lifetime warranty—making them the most robust and useful round lights on the market.

Including 4”, street-legal, SAE J583–compliant lights, these 360-Series fog mount kits adjust for proper beam aiming, use OEM mounting hardware, and offer a seamless fit. Choose between white or selective yellow (for harsh weather conditions).

Features

  • 4”, street-legal, SAE J583–compliant fog lights
  • Up to 3,100 raw lumens in white or selective yellow (for harsh weather)
  • Adjustable beams for optimal aiming
  • Aluminum housing
  • Warranty: limited lifetime
RIGID Industries 360-Series Fog Mount Kits

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: 360-Series LED Lights

RIGID Industries’ all-new 360-Series family of round LED lights features optimized beam patterns that project up to 8,600 raw lumens, aluminum housing, a blacked-out exposed circuit board, prominent RIGID branding, and a limited lifetime warranty—making them the most robust and useful round lights on the market.

Choose a 4” or 6” size as well as your preferred independently controlled backlight color (red, white, blue, or amber) and beam pattern (17 degrees to 60 degrees) to create a customized look. RIGID’s 360-Series lights seamlessly integrate into multiple OEM applications; harness sold separately.

Features

  • Optimized beam patterns: 17 degrees to 60 degrees
  • Two sizes: 4” or 6” round
  • Independently controlled backlight: red, white, blue, or amber
  • Aluminum housing and dedicated wire to run backlighting without primary LEDs
  • Blacked-out exposed circuit board and pressure-equalizing vent
  • 50,000+-hour lifespan
  • Warranty: limited lifetime
RIGID_360-Series_LED_Lights

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: SR-L Series Spreader

The new SR-L Series Spreader light from RIGID Industries easily and instantly enhances any vehicle in two important categories:

  1. Functionality: Broad 120˚ beam pattern illuminates a wide area.
  2. Aesthetics: Halo backlight (in red, blue, amber, or white) adds custom accent lighting.

Using the SR-L Series’ flying leads wiring, you can directly tap into your vehicle’s electrical system or, alternatively, you can purchase a RIGID wiring harness (P/N 40300 sold separately)—no unsightly exposed hardware. When it comes to durability, Spreader lights boast the quality that RIGID is known for, from high-grade aluminum housing to impact-resistant polycarbonate lenses. Includes stainless steel mounting brackets and required hardware.

Features

  • 120-degree wide beam pattern
  • Halo backlight in blue, red, white, or amber
  • Removable surround for color matching
  • Dedicated wire to run backlight
  • Surface mount and flush mount available
  • No exposed hardware
  • High-grade aluminum alloy housing and heat sink
  • High-impact polycarbonate lens
  • Pressure-equalizing valve
  • 9–36 VDC
  • Includes stainless steel mounting brackets and required hardware.
  • Wiring harness sold separately (#40300).
  • Warranty: limited lifetime
RIGID Industries SR-L Series Spreader Light

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: Radiance Pod XL

Radiance Pod XL LED light cubes from RIGID Industries pack the technology and Broad Spot optics of the company’s Radiance light bars into a compact footprint. Similar in design and shape to the popular D-XL PRO, Radiance Pod XL pods measure 4” x 4” and feature a blacked-out circuit board for a subtle, refined look. The Broad Spot optics combine the attributes of spot and flood beam patterns to succeed in a variety of lighting situations.

RIGID Radiance Pod XL offers backlighting in four colors—white, amber, blue, or red—and a Multi-Trigger Harness and separate backlit rocker switches that allow for independent control of the forward-projecting light and backlight. Comes with U-shaped stainless steel brackets.

Features

  • 50,000-plus-hour lifespan.
  • 10–15 VDC.
  • Black exposed printed circuit board and pressure-equalizing vent.
  • Dedicated wire to run backlighting without primary LEDs.
  • D-XL construction and durability.
  • Alloy housing and heat sink.
  • Four backlight options: White, Amber, Blue, or Red.
RIGID Industries Radiance Pod XL

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: RDS SR-Series PRO Curved Light Bar

By taking an E-Series light bar and treating it to a gentle arc, RIGID Industries created the patented RDS SR-Series light bar, which provides a sleek look that integrates beautifully with the curved windshields, bumpers, and grille inserts of today’s trucks and SUVs. The RDS-Series PRO enjoys an improved light output of up to 70% more raw lumens, allowing it to do even a better job of projecting more usable light on the road ahead. The curve is for more than just looks, too: it’s also functional. The arc provides a wider spread of LED light for unmatched lighting coverage from a single light bar.

RIGID RDS SR-Series PRO light bars feature a quality extruded-aluminum housing, an unbreakable polycarbonate lens, and updated branding. Available in two colors (Black and White) and five lengths (20”, 30”, 40”, 50” & 54”).

Features

  • Sleek, curved design complements today’s modern vehicle profiles.
  • Up to 70% more raw lumens than the original RDS SR-Series.
  • Project more usable light ahead of you in a wider spread.
  • Quality extruded-aluminum housing.
  • Unbreakable polycarbonate lens.
  • Finish: Black or White.
  • Lengths: 20”, 30”, 40”, 50”, and 54”.
RIGID Industries RDS SR-Series PRO Curved Light Bar

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: Radiance Pod Scene Light

Leveraging a thermally optimized heat sink, the all-new Radiance Pod Scene Light from RIGID Industries provides clear, bright area light at up to 100 degrees of horizontal spread—delivering maximum coverage with minimal amp draw.

The Radiance Pod Scene Light is built with the same high-grade aluminum alloy housing as RIGID’s D-Series lights. It includes a black exposed printed circuit board, forward-projecting optics, and your choice of independently controlled colored backlighting in white, green, amber, blue, or red. The Radiance Pod Scene Light is designed for customers who want a truly custom look for any area-lighting needs.

Mounting brackets included; also available in a flush mount. Multi-switch wiring harness available (and sold separately).

Features

  • 10-15 VDC.
  • High-grade aluminum alloy housing and heat sink.
  • IP68 rated against dust and water ingress.
  • High-impact polycarbonate lens.
  • Dedicated wire to run backlight without primary LEDs.

RIGID Industries Radiance Pod Scene Light

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.