Tag: rigid industries

In the Garage Video: RIGID Industries DC Power Scene Lights

John Arnaud Leave a comment
Use This Post Clip for Email

Come In the Garage with us as we explore the DC Power Scene Lights from RIGID Industries.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage Video: RIGID Industries 30″ Radiance Plus SR-Series Light Bar

John Arnaud Leave a comment
Use This Post Clip for Email

Come In the Garage with us as we explore the 30″ Radiance Plus SR-Series light bar from RIGID Industries.

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries (46709): A-Pillar LED Light Mounts for 2021 Ford Bronco Sport

John Arnaud Leave a comment
Use This Post Clip for Email

Dial up the brightness on your Ford Bronco Sport with this application-specific mount kit from RIGID Industries, which allows installation of RIGID’s 4” 360-Series, D-Series, or Radiance pods. These mounts are fabricated from stainless steel and protected by a UV- and abrasion-resistant powdercoat to resist harsh conditions and provide years of use. Lights not included.

Features

  • For 2021 Ford Bronco Sport
  • Fits RIGID 360-Series, D-Series, or Radiance pods (not included)
  • Stainless steel construction
  • Abrasion- and UV-resistant powdercoat
RIGID Industries A-Pillar Light Mount for 2021 Ford Bronco Sport

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: Adapt XP Powersports Light Pods

John Arnaud Leave a comment
Use This Post Clip for Email

With three optic zones—scene, driving, and spot—and an internal GPS module, Adapt XP powersports light pods from RIGID Industries seamlessly transition patterns to match your vehicle’s speed. The system also puts you in control, so you can run with the Adapt Mode on or off.

RIGID Adapt XP pods feature an alloy housing and heat sink, impact-resistant polycarbonate lenses, a UV polyester powdercoat, and a universal fit. They are available singly (PN 300414) and in pairs (PN 300415), with each pod good for more than 50,000 hours of epic illumination. Includes amber light covers, mounting brackets, and hardware (wiring harnesses sold separately from RIGID). Backed by a limited lifetime warranty. Intended for off-road use only.

Features

  • Adaptive beam patterns based on your speed
  • Three optic zones: scene, driving, and spotlight
  • Seamless beam transition
  • Turn Adapt Mode on or off
  • Internal GPS module
  • Alloy housing and heat sink
  • Patented optics and impact-resistant lenses
  • UV-resistant polyester powdercoat
  • 9–32 VDC
  • 50,000+ hour lifespan
  • Includes amber light covers, mounting brackets, and hardware
  • Wiring harness sold separately (PN 40187 single; PN 36360 pair)
  • Available in singles (PN 300414) and in pairs (PN 300415)
  • For off-road use only
  • Warranty: limited lifetime
Rigid Industries Adapt-XP Powersports Lights

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries (46702): A-Pillar Mount for ’16-’20 Toyota Tacoma

John Arnaud Leave a comment
Use This Post Clip for Email

A clean installation of RIGID Industries’ high-output light is as close as the 46702 A-Pillar mount, designed just for 2016–2020 Toyota Tacoma (other applications available). This accommodating mount is compatible with a range of RIGID products, including 4” 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance pods (lights sold separately).

Made from stainless steel and covered with a UV- and abrasion-resistant powdercoat, this RIGID A-Pillar Mount is made in the USA to outlast the harshest environments.

Features

  • For 2016–2020 Toyota Tacoma
  • Fits RIGID 4” 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance pods (lights sold separately)
  • Stainless steel with a UV/abrasion-resistant coat
  • Made in the USA
RIGID Industries A-Pillar Mount for 16-20 Toyota Tacoma 46702

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: Chase Light Bar

John Arnaud Leave a comment
Use This Post Clip for Email

Capable of producing more than 300,000 display combinations, the rear-facing Chase light bar from RIGID Industries adds safety and functionality to any UTV, buggy, Jeep, or other off-road vehicle by combining running, brake, reverse, turn signal, and more into a single advanced package. Housed in lightweight aluminum and protected by a polycarbonate lens, the 28” Chase light bar comes with 27 preprogrammed modes such as strobe, scroll, flash, and all-on, and can be customized to any vehicle trigger (four total triggers: one running and three auxiliary).

RIGID designed the Chase light bar to be compliant with multiple race series that require strobing blue, amber, green, and red light. It is available in tube-mount (PN 901801) or surface-mount (901802) options; the tube mount is adjustable from 1.5” to 2” in diameter, while the L-shaped surface mount allows adjustments up to 15 degrees.

Whatever your off-road lifestyle—enthusiast, light show-off, or die-hard racer—the Chase light bar from RIGID is the night-shattering sidekick you need.

Features

  • 28” light bar in tube- or surface-mount options (all mounting hardware included)
  • More than 300,000 possible configurations
  • 27 preprogrammed modes
  • 4 triggers: 1 running and 3 auxiliary
  • User-defined programming and usage
  • Supports running, brake, reverse, and turn signal functions
  • 9–16 VDC
  • High-grade aluminum housing with pressure-equalizing vent
  • High-impact polycarbonate lens
  • Reverse polarity and over/under voltage protection
  • Warranty: limited lifetime
RIGID Industries Chase Light Bar

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries (290413): Adapt E-Series 50″ LED Light Bar

John Arnaud Leave a comment
Use This Post Clip for Email

The Adapt E-Series 50″ LED light bar from RIGID Industries features two layers of adaptive response to optimize your off-road lighting experience.

The first layer, called Active Power Management™, constantly monitors input voltage to adjust the amount of power drawn by the Adapt E-Series bar. This on-the-fly system will gradually reduce power consumption as needed until your vehicle’s power supply stabilizes.

The second layer, RIGID’s Active View Technology™, uses an internal GPS module to properly distribute power among three unique optic zones based on your vehicle’s speed—creating a beam pattern optimal for your current activity. The output seamlessly transitions among Scene optics for low speeds, Driving optics for moderate speeds, and Spot optics for high speeds.

The 50” RIGID Adapt E-Series LED light bar (PN 290413) actively manages power consumption and light output so you can Own the Night.

Features

  • Two layers of adaptive technology manage power draw and light output.
  • Internal GPS module and three optic zones (Scene, Driving & Spot)
  • Fit all existing E-Series grilles/mounts
  • High-grade aluminum alloy heat sink and high-impact polycarbonate lenses
  • 9–36 VDC
  • Pressure-equalizing vent and over/under voltage protection
  • Include harness, switch, and relay
  • Warranty: limited lifetime
RIGID Industries Adapt E-Series Light Bars

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: 360-Series Fog Mount Kits

John Arnaud Leave a comment
Use This Post Clip for Email

RIGID Industries’ all-new 360-Series fog light kits feature optimized beam patterns that project up to 3,100 raw lumens, aluminum housing, a blacked-out exposed circuit board, prominent RIGID branding, and a limited lifetime warranty—making them the most robust and useful round lights on the market.

Including 4”, street-legal, SAE J583–compliant lights, these 360-Series fog mount kits adjust for proper beam aiming, use OEM mounting hardware, and offer a seamless fit. Choose between white or selective yellow (for harsh weather conditions).

Features

  • 4”, street-legal, SAE J583–compliant fog lights
  • Up to 3,100 raw lumens in white or selective yellow (for harsh weather)
  • Adjustable beams for optimal aiming
  • Aluminum housing
  • Warranty: limited lifetime
RIGID Industries 360-Series Fog Mount Kits

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: 360-Series LED Lights

John Arnaud Leave a comment
Use This Post Clip for Email

RIGID Industries’ all-new 360-Series family of round LED lights features optimized beam patterns that project up to 8,600 raw lumens, aluminum housing, a blacked-out exposed circuit board, prominent RIGID branding, and a limited lifetime warranty—making them the most robust and useful round lights on the market.

Choose a 4” or 6” size as well as your preferred independently controlled backlight color (red, white, blue, or amber) and beam pattern (17 degrees to 60 degrees) to create a customized look. RIGID’s 360-Series lights seamlessly integrate into multiple OEM applications; harness sold separately.

Features

  • Optimized beam patterns: 17 degrees to 60 degrees
  • Two sizes: 4” or 6” round
  • Independently controlled backlight: red, white, blue, or amber
  • Aluminum housing and dedicated wire to run backlighting without primary LEDs
  • Blacked-out exposed circuit board and pressure-equalizing vent
  • 50,000+-hour lifespan
  • Warranty: limited lifetime
RIGID_360-Series_LED_Lights

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

RIGID Industries: SR-L Series Spreader

John Arnaud Leave a comment
Use This Post Clip for Email

The new SR-L Series Spreader light from RIGID Industries easily and instantly enhances any vehicle in two important categories:

  1. Functionality: Broad 120˚ beam pattern illuminates a wide area.
  2. Aesthetics: Halo backlight (in red, blue, amber, or white) adds custom accent lighting.

Using the SR-L Series’ flying leads wiring, you can directly tap into your vehicle’s electrical system or, alternatively, you can purchase a RIGID wiring harness (P/N 40300 sold separately)—no unsightly exposed hardware. When it comes to durability, Spreader lights boast the quality that RIGID is known for, from high-grade aluminum housing to impact-resistant polycarbonate lenses. Includes stainless steel mounting brackets and required hardware.

Features

  • 120-degree wide beam pattern
  • Halo backlight in blue, red, white, or amber
  • Removable surround for color matching
  • Dedicated wire to run backlight
  • Surface mount and flush mount available
  • No exposed hardware
  • High-grade aluminum alloy housing and heat sink
  • High-impact polycarbonate lens
  • Pressure-equalizing valve
  • 9–36 VDC
  • Includes stainless steel mounting brackets and required hardware.
  • Wiring harness sold separately (#40300).
  • Warranty: limited lifetime
RIGID Industries SR-L Series Spreader Light

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.