DEI (010383): Fuel Injector Reflective Heat Covers

John Arnaud Leave a comment
Use This Post Clip for Email

In hot temperatures, both performance and factory fuel injectors can be at risk of vapor lock or heat soak, which can cause a rough idle, slow starting, or other potential serious engine problems. DEI’s Fuel Injector Reflective Heat Covers (010383, 8 pack) solve this problem by reflecting both direct and radiant heat away from the injectors. Constructed of high-temperature-rated glass fiber material bonded to a heat-reflective aluminized material, these DEI covers can be used on most engine configurations that use stock or aftermarket fuel injectors. Cooler fuel injectors will perform more efficiently, offering a more consistent throttle response.

Installation is a breeze, as the injectors do not have to be removed. The covers feature a split design, allowing them to wrap around each individual injector, and are secured with a sewn-in hook-and-loop fastening edge.

DEI_010383
DEI_010383

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

K&N (69-3536TTK): Typhoon Intake for 2015 Ford Mustang 3.7L

John Arnaud Leave a comment
Use This Post Clip for Email

A K&N performance air intake system is designed to free up horsepower being lost to restrictive factory air inlet components. By replacing the stock enclosed air box, accordion hosing, and sound baffling, a K&N performance air intake system can reduce restriction, straighten airflow, and increase both horsepower and torque. K&N’s 2015 Ford Mustang Fastback V6 and 2015 Ford Mustang Convertible V6 air intake systems (69-3536TTK) replace these restrictive factory parts with a mandrel-bent aluminum air intake tube, finished in a flat black powdercoat and coupled to a high-flow washable and reusable K&N air filter. Additionally, it incorporates an application-specific, powder-coated heat shield, which helps block hot air from entering the intake system.

K&N_69-3536TTK
K&N_69-3536TTK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Bully Dog: (40410) 50-State GT Gas

John Arnaud Leave a comment
Use This Post Clip for Email

Our Triple Dog Gauge Tuner (or GT) for gas vehicles is one of our top-selling products – and for good reason. The Triple Dog GT is four products in one remarkable unit: a vehicle engine tuner, monitor, gauge, and diagnostic device all in a single unit. The remarkable GT transforms the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions. Other tuning products don’t hold a candle to the Triple Dog GT – it has the largest feature set and the widest range of vehicle applications from a single product.

Bully_Dog_40410
Bully_Dog_40410

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

We Got Hitched!

John Arnaud Leave a comment
Use This Post Clip for Email

By John M. Arnaud

Last Thursday, Performance Corner and The AAM Group enjoyed a special visit with representatives from two of our program vendors: CURT Manufacturing, a giant in the towing industry, and ARIES Automotive, whose custom pickup and Jeep accessories help trailblazers everywhere break their own ground.

We spent the day brainstorming ways that Performance Corner’s marketing tools and services could introduce CURT and ARIES products—hitches, grille guards, bumpers, seat covers, and towing accessories—to more of our jobbers and their customers.

Thanks to Jeff Perez, Joe Thompson, and Patrick Cripe for flying out to see us. We loved having you and look forward to an exciting year ahead!

To add towing power or aggressive styling to your truck, head on over to your local Performance Corner retailer, or find an affiliated store using our dealer locator.

If you are a truck accessories retailer who would like to become part of the nationwide Performance Corner network, please join us today!

CURT / ARIES Group Shot
CURT / ARIES Group Shot

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flex-a-lite®: 15-inch Black Magic Xtreme S-Blade Reversible Electric Fan

John Arnaud Leave a comment

Flex-a-lite® 15-inch Black Magic Xtreme S-Blade reversible electric fans feature 3,300 cfm of airflow. Replacing a belt-driven fan with one of these powerful electric fans can recover engine power and increase fuel economy. These fans feature a durable injection-molded shroud to draw air through a 21.5″ x 17.5″ area. The S-Blade fan design with continuous outer ring provides quiet and efficient operation.

  • One-piece shroud is made from rugged nylon
  • Reversible for use as a pusher or puller
  • Adjustable thermostat with A/C relay

    Flex-A-Lite_180
    Flex-A-Lite_180

Edelbrock (4277): Ford FE Elite II Valve Covers

John Arnaud Leave a comment
Use This Post Clip for Email

Edelbrock 4277 Elite II valve covers are now available for Ford FE engines. The next generation of Elite Series accessories, Elite II, are a modern take on a classic design. They’re made from heavy-gauge, die-cast aluminum and are finished off with a show-quality polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Elite II Series Valve Covers are available in polished finish ONLY!

Edelbrock_4277
Edelbrock_4277

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Quick Fuel Technology (701-1BD): Black Diamond Manifold

John Arnaud Leave a comment
Use This Post Clip for Email

Quick Fuel Technology’s 701-1BD Black Diamond® intake manifold is designed for square-bore carburetor applications on 1957-86 262-400 cid small block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, this manifold will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and bolt hole locations.

This 180° dual plane intake manifold is designed to provide the best performance for stock to street-performance engine applications to a maximum engine speed of 5,500 RPM.

This manifold comes with QFT’s exclusive Black Diamond high-temperature coating, which is impervious to underhood chemicals and fuels. The black satin finish is highly durable, reduces fuel temperature by 6%, and provides a showroom appearance.

QuickFuel Technology 701-1BD
QuickFuel Technology 701-1BD

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

T-REX Grilles (6312671): 2015 Chevrolet Colorado Torch Series Main Grille

John Arnaud Leave a comment
Use This Post Clip for Email

T-REX Grilles, market leaders in quality and innovation, have created several new looks for the 2015 Chevy Colorado with styling elements that include both form and function. Grilles are an exciting and eye-catching way to give your truck a personality that matches your own. The T-REX Grilles for the Colorado are easy to bolt on and require no cutting or welding.

This new Torch Main Grille is precision formed from heavy-duty wire mesh with 12-gauge framed construction and encloses a curved 30” LED Light Bar. The integrated LED lighting component is secure, with hidden mounting brackets for a superior fit and finish. These one-piece wire mesh grilles are distinguished by a flat-black powder-coated finish and directly replace your stock grille.

T-Rex 6312671
T-Rex 6312671

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

TruXedo: Titanium Hard Roll-Up Tonneau Cover

John Arnaud Leave a comment
Use This Post Clip for Email

TruXedo, Inc. is proud to announce the release of its newest cover, Titanium. This hard rolling tonneau cover offers the same full bed access that TruXedo’s soft rolling covers are known for, with the added strength and security of a hard rolling cover.

Titanium’s aluminum slats are bonded to UV-resistant, industrial-grade leather-grain fabric to create a unique cover that combines superior strength with TruXedo’s signature low-profile look. Titanium rolls up and can be secured safely at the front of the truck bed, leaving the truck bed wide open. While closed, this cover offers superior durability, security, and protection.

Truxedo Titanium
Truxedo Titanium

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT® (T6-3072-K): 2 Inch Leveling Kits for 2015 Colorado/Canyon

John Arnaud 2 Comments
Use This Post Clip for Email

The new T6-3072-K Leveling Kit for the 2015 Chevrolet Colorado and GMC Canyon provides 2 inches of front leveling lift. This kit installs with no cutting to the suspension or strut and will provide the necessary lift for a level stance without compromising the factory geometry or limiting suspension. Aligns perfectly after installation and will allow for an increased tire size and no rubbing up to 275/70-17.

This kit is constructed from durable and popular CNC-machined 6061-T6 aircraft-grade billet aluminum. Includes new hardware and spacers to keep that sway bar operating in the factory position.

ReadyLIFT® leveling kits are the fastest, safest, and easiest way to lift the front of your new 2015 Chevy Colorado or GMC Canyon. If you are looking for a true, level stance, this is the kit you want!

ReadyLift_T6-3072-k
ReadyLift_T6-3072-k

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.