Air Lift: Universal Air Spring Spacers

Available in 2”, 4”, and 6” level and 4” and 6” angled versions, the new universal air spring spacers from Air Lift give drivers of lifted tracks added support when towing and hauling threaten to overwhelm stock suspensions.

Air springs eliminate many issues commonly encountered when towing heavy loads, including trailer sway, squat, bottoming out, and poor headlight aim. Occupants will also notice improvement in ride quality, braking, and handling.

Each kit comes with illustrated, easy-to-follow instructions and a limited lifetime warranty.

Features

  • Include two spacers and hardware.
  • Accommodate most lift kits up to 6” (level and angled varieties available).
  • Improve ride characteristics.
  • Restore your truck’s full towing potential.
  • Warranty: limited lifetime.

Air LIft Universal Air Spring Spacers

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance (88362): Circle Track HEI Ignition Module

If you’re a racer who desires to upgrade your current HEI while maintaining a “stock appearing” module for rules purposes, the 88362 from MSD Performance is designed to get the job done. It achieves a high output suitable for circle track racing, producing the spark energy and performance that your application demands.

The 88362 ignition module is a direct replacement for MSD’s circle track HEI distributor (8362CT) or any cast housing HEI.

Features

  • Stock appearing.
  • Direct replacement for the 8362CT MSD circle track HEI distributor.
  • High output for circle track racing demands.
  • Extremely reliable.

MSD Performance Circle Track HEI Ignition Module

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Vision X: Save up to $100 on CG2 Light Cannon Performance LED Light Kits

Via mail-in form. Offer valid January 1 to March 31, 2018. Click image for printable form and complete details!

 

Vision X CG2 Light Cannon Rebate

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Omix-ADA: Year-Long Rebate Program

Get a 5% cash rebate* on a single-invoice Rugged Ridge, Omix-ADA, Alloy USA, or Outland product purchased at an authorized retailer from January 1 to December 31, 2018.

Click image for printable form and complete details!

*Required minimum order value: $149.99; $200 max cash rebate per invoice.

Omix-ADA Year-Long Rebate Program_2018

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT: Get a $50 Prepaid Card on Select Gooseneck Hitch Purchases

Via mail-in form. Offer valid January 1 to February 28, 2018. Click image for printable form and complete details!

 

CURT 50 Dollar Card Gooseneck Hitches

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Vision X Multi-LED Light Cannon

Vision X: CG2 Multi-LED Light Cannon

If you need a night-shattering light that can provide both a broad driving beam pattern and outstanding medium-distance illumination, look no further than the CG2 Multi-LED Light Cannon from Vision X.

These lights boast advanced heat-management technology to ensure maximum light output even under periods of constant use, while the weatherproof Deutsch connector keeps plugging along in even the worst weather (IP68/69K watertight housing). Plus, the locking steel-trunnion mount lets you easily adjust the beam up to 45° so the light goes right where you want it.

Each Light Cannon is potentially 25 in one when paired with Vision X snap-on polycarbonate covers, which can alter the beam pattern (spot to flood) and change the light color.

Features

  • Broad beam driving pattern and medium-distance coverage.
  • Advanced circuitry and aluminum heat sink.
  • Weatherproof Deutsch connector.
  • Aiming system provides 45 degrees of adjustment.
  • Iris-reflector optics with Cree LEDs.
  • Warranty: extended.

Vision X Multi-LED Light Cannon

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Dee Zee: Combo Auxiliary Tank – BlackTread

Designed to save you time and make your work day more efficient, combo auxiliary tanks from Dee Zee are tested and certified to store tools of your trade in addition to holding diesel fuel for refueling at the job site or for transferring directly to your truck’s fuel tank on longer drives.

Manufactured from nonrusting 0.125 Brite-Tread aluminum, this tank is covered with a protective black powdercoat and features a radius curve design to eliminate key weld pressure points. It also meets federal DOT and Federal Motor Carrier Safety Administration requirements to operate as an auxiliary fuel system. Holds 50 gallons.

Features

  • Black powder-coated 0.125 Brite-Tread aluminum.
  • Radius curve eliminates weld pressure points.
  • Includes coupler for venting and dual-threaded bungs.
  • Compatible with center-mounted transfer pumps (larger pumps require bracing).
  • Hydrostatically pressure tested to 29 PSI.
  • Standard 0.375” drain plug.
  • Mounting tabs secure to the truck bed.
  • Meets Federal Motor Carrier Safety Administration requirements for diesel auxiliary tanks.
  • Meets Federal DOT requirements for UN31A and UN31B tanks.
  • Made in the USA.
  • Volume: 50 gallons.
  • Warranty: limited lifetime.

Dee Zee Combo Auxiliary Fuel Tank

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

CURT Industrial Duty Forged Ball Bount 45430

CURT (45430): Industrial-Duty Forged Ball Mount

Rigorously tested at CURT’s Detroit engineering facility, this forged-steel industrial ball mount with powerful I-beam shank boasts ratings of 21,000 lb. gross trailer weight and 2,800 lb. tongue weight, making it the ideal complement to 3” x 3” trailer hitches.

CURT built the 45430 mount to outlast the elements, giving it a durable carbide black powdercoat to resist rust, scratches, and chipping. This particular ball mount also comes with a 1-1/4” trailer ball hole and a 2” rise and 4” drop to accommodate larger pickup trucks and facilitate a more level ride.

Features

  • Fits trailer hitches with a 3” x 3” receiver tube opening.
  • Tested and rated to 21,000 lb. GTW and 2,800 lb. TW.
  • Constructed from solid forged steel for superior strength.
  • 1-1/4” hole accepts a trailer ball shank.
  • 2” rise / 4” drop for use with larger trucks.
  • Durable carbide powder-coated finish.
  • Warranty: limited lifetime.

CURT Industrial Duty Forged Ball Bount 45430

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker BlackHeart: 304 SS Long-Tube Headers for ’79-’93 Ford Mustang LS Swap

Doing an LS swap for your 1979–1993 Ford Mustang with Fox body? Hooker BlackHeart has your long-tube headers, which provide excellent ground and component clearance and are designed specifically to work with Hooker BlackHeart transmission crossmembers and engine mounts for a trouble-free installation. Constructed from 18-gauge, mandrel-bend 304 stainless steel for maximum strength and durability and backed by a limited lifetime warranty. All hardware included. Ask for part number 70101350-RHKR.

Features

  • Lightweight, 18-gauge, mandrel-bent stainless steel.
  • 1-7/8” primary tubes and long-transition 3” collectors with merge spears for maximum flow and increased exhaust velocity.
  • 3/8” thick, CNC-waterjet header flanges for strength and maximum sealing surface.
  • Compatible with stock or multiple validated aftermarket engine K-members.
  • Compatible with the stock steering shaft/rag joint coupler (stock K-member only) and aftermarket steering shafts.
  • Designed to work specifically with Hooker BlackHeart transmission crossmembers and engine mounts.
  • Hand-welded construction for strength, longevity, and good looks.
  • Tube geometry designed for maximum clearance and hassle-free installation.
  • All hardware included.
  • Warranty: limited lifetime.

Hooker BlackHeart Long Tube Headers for Mustang LS Swap 70101350-RHKR

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: WESTiN HDX Front & Rear Bumpers

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the HDX Front & Rear Bumpers and Off-Road Series Waterproof Winch from WESTiN Automotive on a 2016 Ford F-150 XLT.

Parts used and referenced in this video:

HDX Front Bumper (58-141515NW)

HDX Rear Bumper (58-241505S)

HDX Pre Runner Bull Bar (58-95-0015)

Off-Road Series Waterproof Winch (47-2106)

Want to check out more about WESTiN Automotive?
https://www.performancecorner.com/manufacturer/westin-automotive

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.