ACCEL: COP Coils for Ford 2.0L, 2.3L, and 3.5L EcoBoost

ACCEL is now offering high-quality, high-output coil-on-plug (COP) coils to EcoBoost owners! ACCEL SuperCoils feature up to 15 percent higher energy output over OE coils along with optimized windings, resistance, and turn ratios to unleash your engine’s maximum horsepower potential. ACCEL late-model Ford EcoBoost SuperCoils are available in traditional ACCEL yellow, and also in blue and black!

Features

  • Up to 15% more spark energy than OEM coils.
  • Improved throttle response and fuel efficiency.
  • High-temperature, vacuum-applied epoxy resists shock and vibration.
  • Installs in less than an hour.
  • Direct OEM replacement and ODB II compatible (will not trip an engine code).
  • Choice of yellow, blue, or black, depending on application.
  • Offered in singles and multipacks.

ACCEL: COP Coils for Ford 2.0L, 2.3L, and 3.5L EcoBoost

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge (11.232.40): LED Rock Light Kit with Harness for ’07-’16 Wrangler JK

A complete after-dark lighting package, the LED Rock Lights kit from Rugged Ridge is designed with the off-roader in mind, leveraging waterproof aluminum LED housings for safe and reliable performance in all weather conditions. Each of the four white LED Rock Light circuits features weather-resistant connectors and a sealed splitter for a clean installation and efficient operation.

11.232.40 includes four flat mounts and four curved mounts that let you custom position the LEDs based on your needs, plus four 3-watt LEDs, hardware, amber rocker switch, relay, wiring, and instructions. Fits 2007–2016 Jeep Wrangler JKs.

Features

  • For 2007–2016 Jeep Wrangler JK.
  • Waterproof LED housing, weather-resistant connectors, and sealed splitter.
  • Four flat mounts and four curved mounts for variable mounting.
  • Four 3W LEDs and amber rocker switch.
  • Installation time: 2+ hours.
  • Warranty: 5-year limited.

Rugged Ridge (11.232.40): LED Rock Light Kit with Harness for ’07-’16 Wrangler JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Putco: Silver-Lux PRO Replacement LED Bulbs

Designed to dramatically increase visibility, Silver-Lux PRO replacement LED headlight bulbs from Putco are made just for headlamps with projector lenses. Each Cree XHP70 LED bulb enjoys a 180-degree beam angle, with a clockable collar that allows you to adjust the beam and a custom aluminum tower designed to correctly position the LED behind the lens. Integrating Putco’s patented copper weave–cloth heat sink, each Silver-Lux PRO kit emits 6,000 blazing-bright lumens.

Each kit comes with one pair of Silver-Lux PRO bulbs, two driver harnesses, and two anti-flicker harnesses (where applicable).

Features

  • Replacement LED headlight bulbs.
  • Made specifically for headlamps with projector lenses.
  • Increases light visibility.
  • Custom aluminum tower correctly positions the LED behind the lens.
  • Cree XHP70 bulbs boast a 180-degree beam angle and 6,000 lumens per kit.
  • Clockable collar allows you to adjust the light beam.
  • Putco’s exclusive, patented, 100% copper weave–cloth heat-sink.
  • 3-year warranty.

Putco: Silver-Lux PRO Replacement LED Bulbs

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: Husky Liners™ Adjustable Ball Mount

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we get this 2015 Ford F-150 Super Crew tow-ready with the Adjustable Ball Mount from Husky Liners™.

Parts used in this video:

Adjustable Ball Mount 6″ Drop – 17200

Want to check out more about Husky Liners™?
http://performancecorner.com/manufacturer/husky-liners

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: UnderCover Elite LX

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the Elite LX with help from UnderCover’s very own Michael McLaughlin.

Parts used in this video:

Elite LX – Ruby Red (UC2158L-RR)

Want to check out more about UnderCover?
http://performancecorner.com/manufacturer/undercover

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

NSF1 Project Jeep Part 21: Flowmaster® Force II Cat-Back Exhaust

NSF1 is a project Jeep Wrangler Unlimited being built as a joint venture between two giants in the automotive aftermarket—Total Truck Centers and Performance Corner—to benefit the Navy SEAL Foundation. This video series will highlight the installation, features, and benefits of products donated by sponsoring program manufacturers.

In this video, we take a closer look at the following from Flowmaster®:

Force II Cat-back System (817514)

Follow the NSF1 project on:

Facebook: https://www.facebook.com/NSF1Jeep
Twitter: https://twitter.com/performancejeep #NSF1 .

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Freedom Ford Has Landed at SEMA!

Freedom Ford Has Landed at SEMA!

The AAM Group’s “Freedom Ford” project truck has taken its place at booth SU02 at the SEMA Show after a 2,200-mile, multi-day trek that started in northeast Tennessee at AAM Group™ headquarters and wound its way through Arkansas, Oklahoma, Texas, New Mexico, and Arizona before finally arriving for exhibition in Las Vegas for the anticipated automotive aftermarket extravaganza.

Freshly prepped, polished, and shined for the show, Freedom Ford is a 2016 Ford F-150 wrapped in custom black digital camo blended with an American flag graphic. Boasting 35” tires and a 7” lift, Freedom Ford is an imposing presence and a patriotic tribute to the hard-earned liberty we enjoy in the United States thanks to the vigilance and sacrifices of our most courageous citizens.

See It in Person

Freedom Ford was outfitted by many of the biggest names in the truck aftermarket, headlined by primary sponsor Lund International. SEMA Show attendees can get an up-close view of Freedom Ford by stopping by event space SU02.

Freedom Ford Has Landed at SEMA!

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

In the Garage™ with Performance Corner™: UnderCover SwingCase

Come inside the Performance Corner™ garage as we take you through the installation of some of today’s hottest truck accessories In this episode, we install the SwingCase with help from UnderCover’s very own Michael McLaughlin.

Parts used in this video:

SwingCase, Driver’s Side (SC203D)
SwingCase, Passenger’s Side (SC203P)

Want to check out more about UnderCover?
http://performancecorner.com/manufacturer/undercover

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rancho: RS5000X Shocks

Rancho: RS5000X Shocks

Inside Rancho’s new RS5000X shock is a unique, patented valving system and advanced compression functionality that will improve your vehicle’s overall on- and off-road performance.

So, what’s “progressive engagement valving?” At lower speeds or in the earlier stages of the shock’s travel, an eccentric disc in the valve shin stacks will engage the valving at lower frequencies, helping to control the energy of motion as the cycle of the shock increases or decreases in its action. In practical terms, when hitting a pothole or other nonstandard road element, this technology allows for early flow of fluid, which helps to reduce harsh initial impacts and minimize rough rides.

Features

  • Progressive engagement valving.
  • Tuned compression control valve.
  • Enlarged 2.25” twin tube body.
  • 60 psi gas-pressurized shocks.
  • 16 mm nitro-carburized rod.
  • Full-displaced 35 mm bore.
  • 1-3/8” sintered iron piston.
  • Rebound bumper and protective boot.
  • Black, natural rubber bushings.
  • Low-friction, self-lubricating seal.
  • Double-welded loops.
  • Limited lifetime warranty.

Rancho: RS5000X Shocks

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech: 1.75” Long-Tube Headers for ’11-’14 Mustang 3.7L

Providing the perfect combination of quality and value, Flowtech is releasing three new long-tube headers for 2011–2014 Mustang with a 3.7L V6: two in mandrel-bent 409 stainless steel (12142FLT, natural finish and 32143FLT, silver ceramic-coated finish) and one in 304 stainless steel (12143FLT, polished finish). These headers are a must if you’re running a cold air intake, cat-back exhaust, or tuner, with consistent tubing diameters for smooth flow and increased exhaust velocity.

Features

  • Heavy-duty 16-gauge tubing for increased strength and durability.
  • Smooth transition, 1-3/4” diameter primary tubes for improved exhaust flow, performance, and throttle response.
  • OE-style 2-1/2” ball and socket collector connects to factory exhaust head pipe with no cutting or welding.
  • TIG-welded and machined 3/8” header flange for a strong, leak-free seal.
  • Premium aluminum header gaskets included.
  • Available finishes include Natural, Polished, and Silver Ceramic Coated.

Flowtech: 1.75” Long-Tube Headers for ’11-’14 Mustang 3.7L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.