Category: Industry

Go Rhino: Trailline Fenders and Fender Liners for Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

With a unique curved design and smooth interior that prevents mud and debris from accumulating in your Jeep Wrangler’s wheel well, the new Trailline fenders from Go Rhino are fabricated from sturdy steel further protected by a textured-black powdercoat. Trailline fenders come in two widths—3” and 6”—to give you the look and tire clearance you want. Sold in pairs for front and rear.

Complementing the fenders and offering additional protection is the Trailline line of inner fender liners, which are custom formed from aluminum to offer a finished look to your 2007–2018 JK. These accessories benefit from a tight form-fit along with distinctive hex-mesh vents to allow increased engine air flow. Compatible with all Go Rhino steel fenders.

Flare Features

  • Steel fender flares available in 3” and 6” widths for Wrangler JK.
  • Reuse factory side marker light.
  • Increase tire clearance and add unique style.
  • Smooth flush underside prevents mud and debris accumulation.
  • Sold in pairs for front and rear.
  • Finish: textured-black powdercoat.
  • Warranty: 5 years.

Fender Liner Features

  • Aluminum liners help protect wheel wells, suspension, and engine.
  • Two-piece front installation; one-piece rear installation.
  • Unique hex-mesh vents increase air flow to engine.
  • Smooth flush underside prevents mud and debris accumulation.
  • Sold in pairs for front and rear.
  • Compatible with all Go Rhino steel fenders.
  • Finish: textured-black powdercoat.

Go Rhino Trailline Fender Flares for Jeep Wrangler JK

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ARIES ActionTrac Powered Running Boards

ARIES: ActionTrac Powered Running Boards

David Ayers Leave a comment
Use This Post Clip for Email

With its groundbreaking new ActionTrac powered running boards, ARIES has really shaken up the side step world. Featuring an exclusive, patented step-within-a-step design, ARIES ActionTrac boards are actually two steps in one, with up to a 15” drop to provide ultimate access to higher-lifted Jeeps and trucks.

When the door opens, the ActionTrac control module deploys the electric step 8” below the top step. When the door closes, the extended step retracts, providing plenty of off-road clearance. The control module detects any obstruction in the path of the step, pausing operation as required to eliminate the risk of pinch or descent into damaging obstacles. Built-in LED lights also flare to life upon deployment to provide extra visibility in dark conditions, while the single, weather-protected rotary motor ensures quiet, quick, and maintenance-free operation. Plus, their powder-coated aluminum housing helps to protect your vehicle’s finish from kicked-up rocks and debris.

Made in the USA, this ARIES product offers a no-drill bracket installation and a corrosion-free, scratch-resistant T6 aluminum body further ruggedized by a carbide-black powdercoat.

Features

  • Two-tiered step: one static and one electric-powered retractable lower step.
  • Provides up to a 15” drop for easier access to lifted vehicles.
  • Control module automatically detects obstructions.
  • LED lights illuminate step area when lower step is deployed.
  • Quiet, quick, weather-protected motor.
  • Protects your truck’s finish from road hazards.
  • No-drill bracket installation.
  • Extruded 6061-T6 aluminum with carbide black powdercoat.
  • Made in the USA.
  • Warranty: limited lifetime on boards; 1-year limited on brackets.

ARIES ActionTrac Powered Running Boards

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley Premium Mid-Mount LS7 Complete Accessory System 20-190

Holley (20-190): Premium Mid-Mount LS/LS7 Complete Accessory System

David Ayers Leave a comment
Use This Post Clip for Email

Holley’s premium mid-mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a patent-pending “bracketless” design that allows the accessories to bolt directly to the water pump for a clean, integrated form factor. The design offers superb engine visibility to show off your horsepower—not your accessories.

When Holley says “complete,” they mean it. Full of swap-friendly features, this mid-mount system comes with everything you need, including the water pump, A/C compressor, alternator, P/S pump with reservoir, crank damper, all pulleys and belts, heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step of the ultra-easy installation. The 20-190 system is ready for the racetrack or the street.

Features

  • Fits LS7 and LS engines with dry sump and without supercharger.
  • Bracketless accessory mounting with easy assembly.
  • Bottom outlet heater hose options for swap application clearance.
  • LT1-style hairpin 150-amp alternator and water pump cartridge design.
  • Compact SD7 A/C compressor.
  • Type II power steering pump with baffled reservoir.
  • P/S adapter hardline to AN -6 adapter.
  • Steam tube input port and billet tensioner cover.
  • Shortened top outlet nipple for more radiator hose turns and routing room.
  • OE pulley ratios for optimal accessory performance.
  • No adapters/spacers required.
  • Billet alternator and compressor pulley covers.
  • SFI-certified damper with hard anodized billet crank pulley.
  • Works with all common aftermarket and factory throttle bodies and intakes.
  • Works with Hooker turbo manifolds.

Holley Premium Mid-Mount LS7 Complete Accessory System 20-190

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Go Rhino: Get up to $100 Back During the “Truck and Jeep Madness” Promotion

David Ayers Leave a comment
Use This Post Clip for Email

On select purchases made from your local brick-and-mortar retailer OR Go Rhino–authorized online reseller March 1–31. Click image for complete details!

 

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Rugged Ridge: Adjustable Rear Track Bar and Relocation Bracket for ’07-’17 Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

With two new products designed to maintain differential alignment in lifted Jeeps, Rugged Ridge has again delivered the goods in the Jeep market.

First is the adjustable rear track bar (18305.06), which gives JK enthusiasts the ability to adjust the rear track bar length to compensate for 2.5–5” of suspension lift. It’s made from strong forged steel and protected by a durable black powdercoat.

Second is Rugged Ridge’s rear track bar relocation bracket (18303.81), which helps restore proper wheel tracking on your JK or JKU by accurately repositioning the factory rear track bar. It’s built from 4mm plate steel and is also powder coated to resist corrosion. Two positions allow a tailored fitment.

Both products are protected by a five-year limited warranty.

Features

  • Maintain differential alignment in lifted 2007–2017 Jeep Wrangler.
  • Rear track bar relocation bracket for JK.
  • Adjustable rear track bar for JK/JKU.
  • Durable powdercoat.
  • Warranty: 5-year limited.

Rugged Ridge Rear Track Bar Relocation Bracket 18303.8

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

PIAA: Ion Yellow LED Light Kits for ’10-’18 Jeep Wrangler

David Ayers Leave a comment
Use This Post Clip for Email

Designed to mount PIAA’s Ion Yellow (LP530) LED fog (22-05330) or driving (22-05332) lights in the factory fog light locations on 2010–2018 Jeep Wrangler, these kits include laser-cut, powder-coated, hardened-steel brackets and LEDs that will give your Wrangler a much-needed upgrade from its dim factory halogen lights.

The LP530 Ions feature PIAA’s industry-first Reflector Facing Technology to maximize light output and produce the most effective beam pattern on the market. Plus, the yellow light cuts through fog, snow, hail, sleet, and dust.

Each kit comes with two LED lights, brackets, and a preassembled wiring harness with relay and switch.

Features

  • Install Ion Yellow LEDs (driving or fog) on your 2010–2018 Jeep Wrangler.
  • Rugged brackets mount to factory fog light locations.
  • Custom look and the power to cut through obscuring weather conditions.
  • Includes preassembled wiring harness for easy installation.

PIAA Ion Yellow Light Kit for Wrangler

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

WESTiN Automotive: Contour LED DRL Bull Bar

David Ayers Leave a comment
Use This Post Clip for Email

Want an awesome look and better visibility? The Contour LED DRL bull bar from WESTiN Automotive gives you just that with its inset curved 30” combo-beam single-row light bar with 18 five-watt Cree LEDs. The dual-stage bar includes WESTiN’s exclusive daytime running lights (DRL) function and full-powered lighting function, while the adjustable center bar lets you direct the light beam slightly up or down as needed. A flush-mount flange provides a finished look.

Available in textured-black galvanized steel and backed by a three-year warranty. Wiring harness included.

Features

  • 5” tube bull bar for front-end protection.
  • Curved 30” combo-beam, single-row light bar.
  • 18 5W Cree LEDs.
  • Two modes: daytime running lights and full power.
  • Spot and Flood beam reflectors.
  • Installation: bolt on—no drilling required.
  • Finish: textured-black galvanized steel.
  • Warranty: 3 years on bull bar; limited lifetime on LEDs.

WESTIN Contour LED DRL Bull Bar

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Holley: Vintage Series Small-Block Chevy Valve Covers – Factory Orange

David Ayers Leave a comment
Use This Post Clip for Email

Holley’s Vintage series finned valve covers for SBC engines have a new color: Factory Orange joins Standard Natural Cast, Satin Black Machined, and Polished.

These die-cast aluminum Holley covers fit all 1958–1986 small-block Chevy engines with perimeter bolt patterns and are available with (241-239) or without (241-272) emissions provisions.

Features

  • For 1958–1986 SBC engines with perimeter bolt patterns.
  • Die-cast aluminum construction provides high detail and reduced warping/oil leaks.
  • 5” tall for good internal clearance.
  • Available with or without emissions provisions.
  • New Factory Orange finish.

Holley Orange Valve Covers for Small Block Chevy 241-239

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

MSD Performance (2760): Atomic Standalone Transmission Control Module

David Ayers Leave a comment
Use This Post Clip for Email

The Atomic EFI series from MSD Performance is designed to be easy to install and set up, and the 2760 transmission control module from the same family follows in those footsteps. This standalone controller takes the mystery out of programming your GM or Ford four-speed automatic transmission, allowing you to modify shift points, torque converter clutch behavior, shift firmness, and more via the supplied handheld monitor—no more computers or confusing software.

You can leave the monitor in place to keep tabs on your transmission performance or disconnect when finished adjusting. View data such as engine or vehicle speed, throttle position, transmission fluid temperature, shifter position, commanded gear, and many others.

Features

  • Adjust shift points and torque converter clutch behavior.
  • Select different levels of shift firmness.
  • Choose auto-shift mode or manual-shift mode.
  • Included Dyno Mode delivers repeatable chassis dyno results.

MSD Performance Atomic Transmission Control Module 2760

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

ReadyLIFT: 2.5” SST Lift Kits for 2018 Jeep Wrangler JL

David Ayers Leave a comment
Use This Post Clip for Email

ReadyLIFT SST lift kits for the new 2018 Jeep Wrangler JL are here! Shipping in February, these kits present a well-engineered way to achieve a higher stance and the ability to install larger wheels and tires—all while maintaining the all-important factory ride quality.

Though the JL incorporates a new suspension design, the fundamental solid axel configuration remains perfectly compatible with ReadyLIFT’s coil spacer lift kit technology. Offering 2.5 inches of lift in the front and 2.0 inches of rear lift, these kits are tailored to the Rubicon (#69-6825, with clearance for up to 37” tires) and the Sport and Sahara models (#69-6826, with clearance for up to 35” tires).

Kits include plate steel coil spring spacers with isolation keeper plates, steel shock extensions, longer sway bar end links, and custom bump stop extensions.

Features

  • For 2018 Jeep Wrangler JL Rubicon, Sport, and Sahara.
  • Maintains the factory shock and spring components to ensure OEM ride and handling.
  • Increased clearance for aftermarket tires (up to 37” on Rubicon).
  • Allows for proper lift height alignment without the need for expensive control arms/adapters.
  • Easy, bolt-on installation (can be returned to stock).

ReadyLIFT SST Lift Kit for Jeep Wrangler JL

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.